• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.37 no.7
• /
• pp.627-633
• /
• 2009

Composite has become one of the most frequently used material for a tube of satellite camera due to its attractive characteristics. However, laminated composites can be weakened by delamination which comes from interlaminar stress. Such failure mode cause structural instability of the camera as well as degradation of optical quality. Therefore composite tube should be robust in delamination. Also, composite tube should have high stiffness, sufficient high natural frequency and small coefficient of thermal expansion. The design procedures presented in this paper are based on design of experiments. The experiments for mechanical analysis are designed by the tables of orthogonal arrays. In order to manipulate the various mechanical properties systematically, multiple-attribute decision making(MADM) is employed. Through analysis of variance and F-test, the critical design variables which have dominant influences on mechanical performance are determined. Finally improved ply angles for composite tube are determined.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.39 no.1
• /
• pp.1-9
• /
• 2015

This paper presents a design method for optimizing the focused beam characteristics, which are mainly determined by the condenser lenses in a scanning electron microscopy (SEM) design. Sharply reducing the probe diameter of electron beams by focusing the condenser lens (i.e., the rate of condensation) is important because a small probe diameter results in high-performance demagnification. This study explored design parameters that contribute to increasing the SEM resolution efficiently using lens analysis and the ray tracing method. A sensitivity analysis was conducted based on those results to compare the effects of these parameters on beam focusing. The results of this analysis on the design parameters for the beam characteristics can be employed as basic key information for designing a column in SEM.

• The Bulletin of The Korean Astronomical Society
• /
• v.38 no.1
• /
• pp.71.1-71.1
• /
• 2013

한국천문연구원은 우주물체 전자광학 감시체계 기술개발 사업을 통해 자국위성의 추적감시를 위해 0.5m 광시야 감시관측소 국제 네트워크(OWL : Optical Wide-Field patroL)를 구축할 예정이다. OWL 시스템의 설계 검증을 위해 시험모델을 개발하였고, 연구소 내에 테스트베드에 설치하여 종합적인 테스트를 수행하고 있다. 2012년 11월 상세설계 검토회의(CDR)를 수행하여 해외 설치할 서브시스템들의 설계를 확정 하였다. 현재 테스트 베드에서는 마운트와 컨트롤 시스템의 성능을 시험하기위해 10인치 RC 대체 경통으로 테스트 관측을 수행하였고, 3월에 납품한 proto-type 경통을 부착하여 시험관측 중에 있다. 시험 관측으로 획득한 영상들과 시스템의 개발 진행사항을 논의 하고자 한다.

• Aerospace Engineering and Technology
• /
• v.4 no.1
• /
• pp.108-113
• /
• 2005

Strucutral and hygrothermal analysis for a composite tube is carried out in this study, that provides critical parameters for the design of a highly dimensionally stable space telescope. Carpet plots for laminate effective engineering constants are generated and used for the best tube lay-ups with high elastic modulus and highly insensitive to thermal and moisture expansion, which is essential for maintaining optical alignment of opto-mechanical system under random force applied during a launch campaign and orbital thermal load. Despace in the longitudinal direction under hygrothermal load of the tubes constructed with the selected lay-ups is calculated for the validation of lay-up designs on the dimensionalstability. Dynamic analysis is also carried out to feature the resonant behaviour. A zig-zag triangular element accurately representing through thickness stress variations for laminated structures is developed in this study and incorporated into the structural and hygrothermal analysis.

• The Bulletin of The Korean Astronomical Society
• /
• v.37 no.2
• /
• pp.227.2-227.2
• /
• 2012

대구경 고해상도 광학탑재체의 광구조부는 주반사경과 부반사경 등을 포함한 주요 광학부품들과 검출기를 포함한 초점면 조립부 등을 고정 지지해주는 부분으로, 발사시 전달되는 진동 및 우주 열환경하에서의 길이 안정성을 광학성능 범위내로 유지하여야 한다. 광학탑재체의 성능에 가장 큰 영향을 미치는 것은 주반사경과 부반사경의 광축방향의 길이 안정성으로, 광학탑재체의 작동 온도범위 내에서 수 마이크로미터 내외로 안정성이 요구된다. 이를 실현하기 위하여 주반사경과 부반사경의 간격은 열 및 흡습에 둔감한 탄소섬유 강화수지 복합재로 되어 있는 경통 구조물로 설계, 제작된다. 제작된 경통구조물의 길이 안정성을 검증하기 위해서는 별도의 정밀 측정장치가 필요하게 된다. 본 논문에서는 이러한 길이 안정성 측정장치에 대해 기술한다. 온도에 대해 변화가 거의 없는 (CTE<0.1ppm/K) Zerodur 소재의 막대 구조물을 기준 스케일로 삼았고, 이를 지지하기 위해 Invar 소재의 구조물을 사용 하였다. 주반사경의 베젤부위와 부반사경의 접속부위의 변위 변화를 세점에서 측정하여 길이 안정성을 측정할 수 있게 하였다.

• Journal of Korean Ophthalmic Optics Society
• /
• v.14 no.4
• /
• pp.39-44
• /
• 2009

Purpose: To design a mini optical system photographing the iris, which is used in the iridology. Methods: We designed a mini optical system photographing the iris by using the Sigma 2000 design program. Results: We designed a mini optical system photographing the iris, which is suitable in the CCD using a micro actuator for auto-focusing, of which characteristics have the TCL of 30 mm, a magnification of -0.65, about 8.0 mm distance from the 1st lens to the last lens, the max barrel diameter of 11 mm, and about 1 mm of the effective stop diameter. Also the resolution line width of this system is characterised by 92 lps/mm at the 30% MTF value criterion. Conclusions: By designing an optical system of which characteristics have the TCL of 30 mm, about 8.0 mm distance from the 1st lens to the last lens, the max barrel diameter of 11 mm, and the resolution line width of $5.4{\mu}m$ at the 30% MTF value criterion, we could miniaturize the iris photographing optical system.

• Korean Journal of Optics and Photonics
• /
• v.20 no.1
• /
• pp.6-15
• /
• 2009

A mobile phone camera consisting of two aspheric lenses is designed, and stray light distribution on the image plane is analyzed. We assume that most of the incident light is absorbed on the inner surfaces of the lens barrel and spacers, only a small fraction of the light is scattered uniformly. Assuming that 10% of the incident light is scattered on the barrel and spacers, the maximum value of stray light is 7.1% of the ideal image intensity. The result of analysis shows that stray light originated mostly from internal reflection on the ribs. The contributions of scattering by the barrel and spacers are relatively small. To reduce the internal reflection, thin absorbing plates are inserted between lenses, and the shapes of spacers are modified. After the redesigning of the lens barrel, the maximum value of stray light is reduced to 1.1% of the ideal image intensity.

• The Bulletin of The Korean Astronomical Society
• /
• v.41 no.2
• /
• pp.52.3-53
• /
• 2016

일반적으로 사용되는 소구경 망원경은 경통에 의한 차폐로 인해 내부 구조를 보기 쉽지 않으므로, 망원경 광학계를 이해하기에는 적합하지 않다. 본 연구에서는 최소한의 배플 만을 사용하여 경통이 없는 구조의 개방형 망원경을 설계 및 제작하였다. 개발된 변환식 반사망원경 키트(TRT Kit, Transformable Reflecting Telescope Kit)는 부경 모듈을 교체하는 방식만으로 뉴턴식 망원경(Newtonian Telescope), 카세그레인식 망원경(Cassegrain Telescope), 그리고 그레고리식 망원경(Gregorian Telescope)으로 변형하는 것이 가능하다. 주경, 부경을 비롯한 망원경의 모든 부분은 사용자가 직접조립할 수 있도록 모듈화(Modularization) 하였다. 또한 부경에 부착된 슬라이딩 장치 및 리니어 스테이지(Linear Stage)는 망원경의 초점을 정밀하게 맞출 수 있도록 설계하였다. TRT Kit를 이용하여 학생들은 세 가지 형태의 망원경 광학계를 직접 조립하고 그 구조 및 성능을 비교해 볼 수 있으며, 광축 정렬, 정밀 초점 조절 과정을 통해 기본적인 광학계의 원리를 이해 할 수 있다.

• Journal of Korean Ophthalmic Optics Society
• /
• v.18 no.4
• /
• pp.509-517
• /
• 2013

Purpose: The purpose of this study is developing the 2.6 ${\times}$ optical scope with a Abbe-K$\ddot{o}$nig prism. Methods: First, considering the size of the effective aperture and the focal length of the objective lens, we designed an Abbe-K$\ddot{o}$nig prism. Next, we calculated the optical and geometric distances of Abbe-K$\ddot{o}$nig prism designed in this way. After allocating the focal length of the objective lens and the eyepiece lens so as to satisfy the magnification and optical effective distance of the entire system by using this calculation result, we completed the entire system by optimizing this optical system. Results: We were able to complete the optical scope of about 2.6 ${\times}$ magnification by designing an objective lens with a focal length of 63.13 mm which was composed of two pieces, an eyepiece with a focal length of 24.3 mm which was composed of four pieces, and an Abbe-K$\ddot{o}$nig prism with a face length 11.5 mm. Conclusions: We designed and fabricated an optical scope with 2.6 ${\times}$ magnification employing an Abbe-K$\ddot{o}$nig prism. Then, this system became the compacted optical system with a barrel diameter of 31 mm, characterized by an effective aperture of 12.0 mm and an effective optical barrel length of 103 mm and a resolution of 200 cycles/rad at 50% MTF criterion within the half viewing field angle of $6.42^{\circ}$.

• Korean Journal of Computational Design and Engineering
• /
• v.5 no.1
• /
• pp.1-11
• /
• 2000

The purpose of Computer Aided Design is to design good products as quickly as possible. To do this, it is important to reuse the old designs and build on them. Most engineering designers, therefore. hale studied methods for reusing old designs, and the results of their study hale been applied to new designs Unfortunately, this only involves reuse of geometric data without design knowledge. If they can design products with the geometric data, including design knowledge, of the old designed and share them through the Internet, design efficiency will be improved. In other words, one way to improve designer's productivity is to share design information that includes knowledge and scattered data across design offices. This paper introduces a shared design environment with distributed knowledge-base. A product design environment based on distributed knowledge-base is proposed, which integrates the CORBA, OLE and WWW as the network architecture, a 3D CAD system, and an expert system shell. A design example of the lens barrel of a projection television is implemented to verify the idea.