• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.13 no.5
• /
• pp.436-442
• /
• 2020

ESS(energy storage system) has recently become an important power source in various areas due to increased renewable energy resources. The more ESS is used, the less the effective capacity of the ESS. Therefore, it is important to manage the remaining useful lifetime(RUL). RUL can be checked regularly by inspectors, but it is common to be monitored and estimated by an automated monitoring system. The accurate state estimation is important to ESS operator for economical and efficient operation. RUL estimation model usually requires complex mathematical calculations consisting of cycle aging and calendar aging that are caused by the operation frequency and over time, respectively. A lightweight RUL estimation model is required to be embedded in low-performance processors that are installed on ESS. In this paper, a lightweight ESS RUL estimation model is proposed to operate on low-performance micro-processors. The simulation results show less than 1% errors compared to the original RUL model case. In addition, a performance analysis is conducted based on ATmega 328. The results show 76.8 to 78.3 % of computational time reduction.

• Korean Journal of Comparative Education
• /
• v.20 no.2
• /
• pp.95-128
• /
• 2010

This article presents a one and half-year process of Lesson Study conducted at a K-8 school in an urban district in the eastern U.S. Lesson Study, a Japanese form of professional development that centers on collaborative study of live classroom lessons, has spread rapidly in the U.S. since 1999 and has been argued as a promising alternative model for teacher-led school reform through professional development. The Lesson Study group described here was composed of five teachers, one administrator, and one instructional improvement coordinator belonging to the participant school and two instructional super-intendants from the school district. Data was collected from October 2007 to February 2009 and a qualitative case study method was employed for this study. Drawing a case of Lesson Study, this article intended to show how Lesson Study group members participated in planning, teaching, observing, discussing, and improving lessons collaboratively for student learning by enhancing teacher professional competence so that find directions for future implementation in Korea. This article investigates (1) process of Lesson Study, (2) issues Lesson Study group members mainly dealt with, and (3) changes have taken place in Lesson Study as it is conducted over time. (4) Finally, this article concludes with challenges to adopting Lesson Study successfully in Korea.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.4 no.1
• /
• pp.11-26
• /
• 1984

The aim of this study is to establish a synthetical optimal method that simultaneously analyze and design reinforced concrete flat slab-column structures involving multi-constraints and multi-design variables. The variables adopted in this mathematical models consist of design variables including sectional sizes and steel areas of frames, and analysis variable of the ratio of bending moment redistribution. The cost function is taken as the objective function in the formulation of optimal problems. A number of constraint equations, involving the ultimate limit state and the serviceability limit state, is derived in accordance with BSI CP110 requirements on the basis of limit state design theory. Both objective function and constraint equations derived from design variables and an analysis variable generally become high degree nonlinear problems. Using SLP as an analytical method of nonlinear optimal problems, an optimal algorithm is developed so as to analyze and design the structures considered in this study. The developed algorithm is directly applied to a few reinforced concrete flat slab-column structures to assure the validity of it and the possibility of optimization From the research it is found that the algorithm developed in this study is applicable to the optimization of reinforced concrete flat slab column structures and it converges to a optimal solution with 4 to 6 iterations regardless of initial variables. The result shows that an economical design can be possible when compared with conventional designs. It is also found that considering the ratio of bending moment redistribution as a variable is reasonable. It has a great effect on the composition of optimal sections and the economy of structures.

• Investigative Magnetic Resonance Imaging
• /
• v.10 no.2
• /
• pp.98-107
• /
• 2006

Magnetization Transfer (MT) imaging generates contrast dependent on the phenomenon of magnetization exchange between free water proton and restricted proton in macromolecules. In biological materials in knee, MT or cross-relaxation is commonly modeled using two spin pools identified by their different T2 relaxation times. Two models for cross-relaxation emphasize the role of proton chemical exchange between protons of water and exchangeable protons on macromolecules, as well as through dipole-dipole interaction between the water and macromolecule protons. The most essential tool in medical image manipulation is the ability to adjust the contrast and intensity. Thus, it is desirable to adjust the contrast and intensity of an image interactively in the real time. The proton density (PD) and T2-weighted SE MR images allow the depiction of knee structures and can demonstrate defects and gross morphologic changes. The PD- and T2-weighted images also show the cartilage internal pathology due to the more intermediate signal of the knee joint in these sequences. Suppression of fat extends the dynamic range of tissue contrast, removes chemical shift artifacts, and decreases motion-related ghost artifacts. Like fat saturation, phase sensitive methods are also based on the difference in precession frequencies of water and fat. In this study, phase sensitive methods look at the phase difference that is accumulated in time as a result of Larmor frequency differences rather than using this difference directly. Although how MT work was given with clinical evidence that leads to quantitative model for MT in tissues, the mathematical formalism used to describe the MT effect applies to explaining to evaluate knee disorder, such as anterior cruciate ligament (ACL) tear and meniscal tear. Calculation of the effect of the effect of the MT saturation is given in the magnetization transfer ratio (MTR) which is a quantitative measure of the relative decrease in signal intensity due to the MT pulse.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.29 no.2
• /
• pp.109-120
• /
• 2017

A discounted cost model for preventive maintenance of armor units of rubble-mound breakwaters is mathematically derived by combining the deterioration model based on a discrete-time stochastic process of shock occurrence with the cost model of renewal process together. The discounted cost model of condition-based maintenance proposed in this paper can take into account the nonlinearity of cumulative damage process as well as the discounting effect of cost. By comparing the present results with the previous other results, the verification is carried out satisfactorily. In addition, it is known from the sensitivity analysis on variables related to the model that the more often preventive maintenance should be implemented, the more crucial the level of importance of system is. However, the tendency is shown in reverse as the interest rate is increased. Meanwhile, the present model has been applied to the armor units of rubble-mound breakwaters. The parameters of damage intensity function have been estimated through the time-dependent prediction of the expected cumulative damage level obtained from the sample path method. In particular, it is confirmed that the shock occurrences can be considered to be a discrete-time stochastic process by investigating the effects of uncertainty of the shock occurrences on the expected cumulative damage level with homogeneous Poisson process and doubly stochastic Poisson process that are the continuous-time stochastic processes. It can be also seen that the stochastic process of cumulative damage would depend directly on the design conditions, thus the preventive maintenance would be varied due to those. Finally, the optimal periods and scale for the preventive maintenance of armor units of rubble-mound breakwaters can be quantitatively determined with the failure limits, the levels of importance of structure, and the interest rates.

• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.10
• /
• pp.1905-1919
• /
• 2000

The main motivation of this research is to develop an intelligent control strategy for Activated Sludge Process (ASP). ASP is a complex and nonlinear dynamic system because of the characteristic of wastewater, the change in influent flow rate, weather conditions, and etc. The mathematical model of ASP also includes uncertainties which are ignored or not considered by process engineer or controller designer. The ASP is generally controlled by a PID controller that consists of fixed proportional, integral, and derivative gain values. The PID gains are adjusted by the expert who has much experience in the ASP. The ASP model based on $Matlab^{(R)}5.3/Simulink^{(R)}3.0$ is developed in this paper. The performance of the model is tested by IWA(International Water Association) and COST(European Cooperation in the field of Scientific and Technical Research) data that include steady-state results during 14 days. The advantage of the developed model is that the user can easily modify or change the controller by the help of the graphical user interface. The ASP model as a typical nonlinear system can be used to simulate and test the proposed controller for an educational purpose. Various control methods are applied to the ASP model and the control results are compared to apply the proposed intelligent control strategy to a real ASP. Three control methods are designed and tested: conventional PID controller, fuzzy logic control approach to modify setpoints, and fuzzy-PID control method. The proposed setpoints changer based on the fuzzy logic shows a better performance and robustness under disturbances. The objective function can be defined and included in the proposed control strategy to improve the effluent water quality and to reduce the operating cost in a real ASP.

• The Journal of the Convergence on Culture Technology
• /
• v.8 no.3
• /
• pp.581-587
• /
• 2022

The water god, Venerable Bhadra, Indian Tammola (Tamla as the 'mol' and 'ju' characters were eliminated) came to Tamla with 900 Arahants(The highest Buddhist monks) around 563-483 BC. It is the propagation of Buddhism through the world's most sacred water (Heiligkeit). The traces of the three surnames of Goyangbu are the first samsunghyeol and the dwelling of the den of Jonjaam(cave of venerable Bhadra) in Yeongsil, giving a glimpse into the era of living in caves. The second is a link that is in line with 3, the basic number in the decomposition of 900 (=3^*3^*100) disciples of Bhadra, considering that 3 and 3 of the three surnames in Goyangbu are three times 9. At this time, 3 is the person of heaven and earth, religiously, marriage, hope, or complete number, and Jeju culture is resting everywhere. For example, 3 of the samsunghyeol, 3 of the 1, 2, 3 Dodong, 3 of the 3 Dado, 3 of the 3 Mudo, 3 of the 3 disasters, 3 of the Goyangbu 3-surnames, 3 of the house Olle Jeongnang and, among 900 (=3^*3^*100) disciples of Venerable Bhadra, the common factor is 3. It is the 'island of 3'. These papers consist of 1 and 2 parts. In Part 1, the name of Tamla came from Tammola, India, and 900 Indian Buddhist Arahants estimated that the three surnames in Goyangbu were the ancestors. Part 2 highlights how the basic principle of jeonganag derived from Indian customs has evolved and is being used in modern mobile communication and DNA gene life science.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.36 no.8
• /
• pp.995-1009
• /
• 2007

The purpose of this study was to investigate the dietary habits, behaviors, and food consumption frequency according to gender and obesity level among middle school students in the Jeonju area. Subjects for the questionnaire were 450 middle school students (male 255, female 195) and were classified as either obese students (n=150 or non-obese students (n=299) by the obesity assessment method. The results were analyzed with SAS program (Version 9.1), and were as follows. 1. Dietary behaviors were significantly different in the rate of 'Skipping breakfast (p<0.05)', 'Duration of meal time (min) (p<0.05)' and 'Unbalanced diet (p<0.01)' between males and females. Dietary habits and behaviors also differed significantly for the rate of ‘Taste preferences (p<0.05)’, and 'Unbalanced diet (p<0.01)' between obese students and non-obese students. 2. Food consumption frequency per week was as follows. First, males were significantly higher than females in 'Instant noodle (p<0.05)', 'Milk (p<0.01)', and 'Soda pop (p<0.01)'; on the other hand females were significantly higher than males in 'Chocolate, Candy (p<0.01)'. Second, non-obese students were significantly higher than obese students in 'Instant noodle (p<0.05)', 'Hamburger, Pizza (p<0.05)', and 'Chocolate, Candy (p<001)'. Especially, non-obese male students were higher in 'Instant noodle (p<0.05)' and 'Hamburger, Pizza (p<0.05)'; non-obese female students were higher in 'Chocolate, Candy (p<0.01)'. In conclusion, an action program is needed to encourage healthful dietary behaviors, increased physical activity, and forming good lifelong habits.