• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.11
• /
• pp.5947-5955
• /
• 2013

This study was intended to estimate the axial deformation of joint between pavement modules in the rapid-constructible modular pavement system, and to investigate the applicability of two-phase composites for a joint material, which was composed of cement paste, epoxy, or polyurethane as a matrix and sand as particles. A case which had supports under the pavement module as well as a case which the module was put on roadbed directly were considered in FEM analysis for the axial deformation. The effect of self-weight, live load, thermal change, and drying shrinkage were estimated and the thermal change was found to cause the largest deformation compared to the others. Deformation capacity of two-phase composites was predicted using the modified shear-lag model. In the analytical results for the elastic modulus and maximum tensile strain with different volume fractions of sand, 20~30 % replacement of sand was revealed to satisfy the required strain capacity with economy when if the width of joint was designed to be 15~20 mm.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2000.02a
• /
• pp.126-126
• /
• 2000

다이아몬드상 카본(DLC) 필름은 경도가 높고, 마찰계수가 낮다는 장점을 가지고 있기 때문에 내마모성 코팅이나 윤활성코팅에 응용을 위한 연구가 활발히 진행중이다. 하지만 마찰계수가 주변환경에 매우 큰 영향을 받는다는 단점이 있다. 이러한 단점은 DLC필름의 응용에 대한 저해 요인이 되며, 이 점을 보완하기 위해서 DLC 필름에 Si을 첨가하는 연구들이 진행되고 있다. 본 실험에서는 r.f-PACVD 법을 이용하여 Si이 첨가된 DLC 필름의 주위 환경 변화에 따른 마찰특성의 변화를 연구하였다. 사용한 반응 가스는 벤젠(C6H)과 희석된 Silane(SiH4 : H2 = 10 : 90)이며, 희석된 Silane과 벤젠의 첨가비율을 조절하여 필름내 Si의 함량을 조절하였고, 증착시 바이아스의 전압은 -400V로 하였다. 마찰테스트는 Ball-on-Disk type의 조건에서 대기, 건조공기, 진공의 세가지 분위기에서 마찰테스트를 실행하였다. 실험결과 마찰계수는 건조공기, 대기, 진공의 순으로 증가하였고, 필름내에 포함되어 있는 Si의 양이 증가할수록 마찰계수는 낮고 안정한 값을 나타내었다. Tribochemiacal 분석과, ball과 track의 전자현미경 사진 분석 결과, 진공에 비해서 건조공기와 대기중에서 마찰계수가 낮은 것은 DLC 필름내에 마모 track 중심부에 Si-C-O 계의 화합물이 형성되어, 이 화합물이 마찰계면에 존재하여 마찰계수를 낮추었음을 확인하였다. 그리고 대기중에서 실험한 경우, 습기의 존재로 인해 마모입자가 볼의 표면에서 엉김으로써 건조공기의 상태에서 보다 높은 마찰저항을 갖게 됨으로 인하여 마찰계수가 높아짐을 알 수 있었다.a)는 as-deposit 상태이며, 그림 1(b)는 45$0^{\circ}C$, 60min 열처리한 plan-view TEM 사진이다.dical의 영향을 조사하였으며 oxygen radical의 rf power에 따른 변화는 OES(Optical emission spectroscopy)를 사용하였다. 너무 적은 oxygen ion beam flux나 oxygen radical은 film의 전도도 및 투과도를 저하시켰고 반면 너무 과도한 flux의 증가 시는 전도도는 감소하였고 투과도는 증가하는 경향을 보였다. 기판에 도달하는 oxygen ion flux는 faraday cup을 이용하여 측정하였으며 증착된 ITO film은 XPS, UV-spectrometer, 4-point probe를 이용하여 분석하였다. 때문으로 생각되어진다. 또한, 성장 온도가 낮아짐에 따라 AlGaN의 성장을 저해하기 때문으로 판단된다. 성장 온도 변화에 따라 성장된 V의 구조적 특성 및 표면 거칠기 변화를 관찰하여 AlGaN의 성장 거동을 논의하겠다.034, 0.005 정도로 다시 감소하였다. 박막의 유전율은 약 35 정도의 값을 나타내었으며 X-선 회절 data로부터 분석한 박막의 변형은 증온도에 따라 7.2%에서 0.04%로 감소하였고 이 이경향은 유전손실은 감소경향과 일치하였다.는 현저하게 향상되었다. 그 원인은 SB power의 인가에 의해 활성화된 precursor 분자들이 큰 에너지를 가지고 기판에 유입되어 치밀한 박막이 형성되었기 때문으로 사료된다.을수 있었다.보았다.다.다양한 기능을 가진 신소재 제조에 있다. 또한 경제적인 측면에서도 고부가 가치의 제품

• International Journal of Highway Engineering
• /
• v.4 no.3 s.13
• /
• pp.43-49
• /
• 2002

Asphalt pavements have to perform under the conditions of heavily-loaded vehicles due to the industrialization and large temperature variance between the summer and the winter. Due to these factors, a characteristics change of early permanent deformation becomes a big issue, and to remedy this problem many research to use modified asphalt are being widely conducted. However, most of the modified asphalt is being paved after milling the surface course and applying tackcoating, and it is being used mostly for the repair and maintenance purpose rather than pavement of new national road. The purpose of this investigation is to obtain some fundamental data for the evaluation of the performance and long-term performance of the construction material mixtures by the laboratory test and field experiments. For the field experiment, 200m of two-lanes national road, that is being paved for the new national road under the direction of Pusan Regional Construction Management Office, was paved with SBS PMA and PSMA asphalt mixtures, which are an modified asphalt mixtures used for the surface course, on top of the base course paved with other modified asphalt mixtures. The remaining section of the new national road was paved with dense grade mixture. The laboratory tests assessed and analyzed the mixture characteristics by Marshall's stability test, strength tests and wheel-tracking test. On the basis of the evaluation result of the temperature control and roughness of the newly constructed road at the field experiment site, it is desired to evaluate and identify the most economic modified asphalt mixtures by long-term performance evaluation and LCC(Life Cycle Cost) analysis in order to apply the test result to the design of new road construction in the future.

• Journal of Korean Society of Rural Planning
• /
• v.26 no.1
• /
• pp.77-88
• /
• 2020

This study had comparatively analyzed the influence factors of the farm village business on the local farmhouses centered on the level of importance and the level of performance. For this, a questionnaire survey had been conducted with 350 local residents who had participated in the Rural Field Forum of 14 villages, including Gyeongsangnam-do, Gyeongsangbuk-do, Chungcheongnam-do, Chungcheongbuk-do, Jeollabuk-do, etc. Excluding the insincere survey questionnaires, the final 232 people had been analyzed. As a result of the analysis of this study, the factors that have the influences on the diverse, rural areas had been compressed into the three factors of the lodging and the program, the special, rural area products, and the transportation and the accessibility. In the level of importance-level of performance analysis, it had been analyzed that the special, rural area products must maintain the continuity, that the transportation accessibility must avoid the excessive endeavor, and that the lodging program had a low priority order. Therefore, it can be said that it is necessary to concentrate the capability of the rural village business in the direction of developing the local specialties in the future. Next, after dividing the level of performance and the level of importance into the two groups each, the multiple group path analysis had been carried out. As a result, in the result of the analysis of the path that has an influence on the economic factor, the path coefficient of the level of importance of the transportation accessibility -> profit increase was 0.195+0.064 and the path coefficient of the level of performance of the transportation accessibility -> profit increase was 0.251+0.074. Therefore, both of them had the statistically significant amounts of the influences. This suggests that the transportation accessibility is an important element of the profit increase of the region. As a result, in the future, the research on the urban and rural exchanges using the even more convenient and inexpensive transportation means is needed. Most of them need the voluntary effort of the residents for being able to creatively develop and sell the native, agricultural, specialty products that are petty. Also, the rural areas need the diversities of the lodging programs and the recreational programs, a convenient reservation system, and the development of a unique tourism experience program. In the future, the researches that had been advanced in the even more detailed domain that is related to these factors are highly expected. Also, the analyses that had been carried out with even more areas and subjects as the targets are needed.

• Journal of Technology Innovation
• /
• v.22 no.2
• /
• pp.131-156
• /
• 2014

Nowadays, the R&D policy has gradually emphasized the creation of economic values added through technology transfer of R&D performance. Technology transfer plays an important role in making a profit on commercialization of technology, but the performance of technology transfer is a great difference between countries. Therefore, this study analyzes the effects of the science and technology environment on technology transfer from a national point of view. In this study, the science and technology environment largely consists of openness, ease of firms, protection of intellectual property, emphasis of science in schools. We select OECD 34 countries as the subject of this study and collect the data from IMD between 2002 and 2011. The results show that all hypotheses are supported. Openness and ease of firms are related to technology transfer as they help to improve the understanding and willingness about technology transfer nationally. Protection of intellectual property also influences the spread of R&D performance positively, and the environment that is emphasized science in school actively promotes both creation and technology transfer of R&D performance. Although prior studies have focused on technical capabilities to improve the performance of technology transfer, we consider the influence of the science and technology environment from an institutional perspective. This study will do much for formulate the R&D policy.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2007.05a
• /
• pp.1140-1144
• /
• 2007

모래하천과 자갈하천의 하중도에 성립한 식생을 분석하여 하천복원과 복원된 하천의 사후 관리에서 요구되는 생태정보를 구축하였다. 모래하천의 하중도에는 버드나무군락, 물억새군락, 산조풀군락, 속속이풀군락, 큰개여뀌군락, 밭뚝외풀군락 등이 성립하였다. 이러한 식생자료를 서열법으로 처리한 결과, 식물의 배열은 천이경향을 반영하였고, 하중도의 미지형에 의해 결정된 지하수위 높이가 천이단계를 지배하는 것으로 판단되었다. 모래하천인 용수천의 하중도에서 상류로부터 하류를 향해 식생의 분포는 버드나무군락-물억새군락-산조풀군락-속속이풀군락의 순서를 보였다. 우점종의 생활형에 따라 이들을 구분하면, 이 순서는 목본 식물군락-다년생 식물군락-1년생 식물군락의 순서를 보였다. 이러한 식생의 배열로부터 하중도는 하류 방향으로 새로 생성되고 있음을 알 수 있었다. 자갈하천의 하중도에는 발달단계가 다른 세 개의 소나무군락과 초지가 성립하였다. 소나무군락은 유령림, 성숙목과 유령목이 혼합된 복층림, 그리고 성숙림으로 이루어졌다. 초지는 쑥, 달뿌리풀, 환삼덩굴, 소나무 실생, 황철나무 등이 산재하는 밀도가 낮은 식생으로 이루어졌다. 이러한 식생자료를 서열법으로 처리한 결과 여기에서도 식생의 배열은 천이경향을 반영하였다. 천이단계를 지배하는 요인은 홍수에 밀려온 자갈의 피복율로 나타났다. 상류로부터 하류를 향해 식생의 분포는 초지, 소나무 유령림, 소나무 복층림 및 소나무 성숙림의 순서를 보였다. 이러한 식생의 배열로부터 하중도는 상류방향으로 새로 성립하고 있음을 알 수 있었다.변지역에 거주하는 주민의 역할이 중요하며, 이에 따라 보 철거 선정 체계는 보 철거를 위해서 보 주변 지역 거주민을 설득하며, 하천의 환경 개선을 위한 합리적인 대안 제시를 목적으로 하고 있다. 선정 체계를 바탕으로 주민 협의 및 대안 제시를 통해 결정된 대상 보는 선정 체계 안에서 보 철거 영향 판단 절차에 따라서 보 철거로 인한 수문, 수리, 지형, 수질, 생태 영향을 판단하게 되며, 이와 더불어 사회 경제적인 영향을 평가하게 된다. 평가결과에 따라서 보를 완전히 철거하거나 다른 대안을 고려하여 보를 부분적으로 철거하거나 개량하게 된다.곳으로 1/3의 자기 생산을 담당하고 있었다. $\ulcorner$경상도지리지$\lrcorner$(慶尙道地理志)에는 $\ulcorner$세종실록$\lrcorner$(世宗實錄) $\ulcorner$지리지$\lrcorner$(地理志)와 동년대에 동일한 목적으로 찬술되었음을 알 수 있다. $\ulcorner$경상도실록지리지$\lrcorner$(慶尙道實錄地理志)에는 $\ulcorner$세종실록$\lrcorner$(世宗實錄) $\ulcorner$지리지$\lrcorner$(地理志)와의 비교를 해보면 상 중 하품의 통합 9개소가 삭제되어 있고, $\ulcorner$동국여지승람$

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.11
• /
• pp.3363-3372
• /
• 2009

Continued jobless growth in economy, coupled with the current economic recession, is aggravating the situation of job market. In order to create more jobs and reduce the economic gap in a society, an independent creative firm of a sole entrepreneurs is suggested as an alternative mean. Understanding entrepreneurial motivations of a sole entrepreneur will be helpful in developing educational programs on starting an independent creative firm and in establishing a relevant government policy. This study, therefore, proposes a new model on entrepreneurial motivations in the independent creative firm and performs case study. The results of the study show that the personal environment and the personal characteristics of entrepreneurs have much effects on motivation of starting the independent creative firms. Among the personal environments, entrepreneurs' educational backgrounds, work experiences, and personal networks have great influences on entrepreneurial motivations. The processes of sustained entrepreneurship involve: (a) the determination of business ideas and goals, (b) the inception of a new business and managerial activities, (c) the entrepreneur's assessment of both intrinsic and extrinsic rewards of business performances, and (d) the adjustment of business ideas and goals in accordance with the results of the assessment. The results of the study could be applied in developing educational programs and consulting guidelines on independent creative firms and in establishing government's supportive policies on the firm.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.17 no.1
• /
• pp.1-14
• /
• 2015

Climate change caused by elevated greenhouse gases would affect crop production through different pathways in agricultural ecosystems. Because an agricultural ecosystem has complex interactions between societal and economical environment as well as organisms, climate, and soil, adaptation measures in response to climate change on a specific sector could cause undesirable impacts on other sectors inadvertently. An integrated system, which links individual models for components of agricultural ecosystems, would allow to take into account complex interactions existing in a given agricultural ecosystem under climate change and to derive proper adaptation measures in order to improve crop productivity. Most of models for agricultural ecosystems have been used in a separate sector, e.g., prediction of water resources or crop growth. Few of those models have been desiged to be connected to other models as a module of an integrated system. Threfore, it would be crucial to redesign and to refine individual models that have been used for simulation of individual sectors. To improve models for each sector in terms of accuracy and algorithm, it would also be needed to obtain crop growth data through construction of super-sites and satellite sites for long-term monitoring of agricultural ecosystems. It would be advantageous to design a model in a sector from abstraction and inheritance of a simple model, which would facilitate development of modules compatible to the integrated prediction system. Because agricultural production is influenced by social and economical sectors considerably, construction of an integreated system that simulates agricultural production as well as economical activities including trade and demand is merited for prediction of crop production under climate change.

• Journal of the Institute of Convergence Signal Processing
• /
• v.19 no.2
• /
• pp.61-67
• /
• 2018

Welding preheating means that the surface of the base material to which the metal is welded before the main welding is heated to a constant temperature. It prevents the cracks of the adjacent influences such as reduction of material hardening degree by controlling the cooling rate, suppression of segregation of impurities, prevention of thermal deformation, and moisture removal. For this reason, it is a necessary operation for high quality welding. Induction heating is an efficient heating method that converts electric energy into heat energy by applying electromagnetic induction phenomenon. Compared with combustion heat generated by gas and liquid, it is clean, stable, and economical as well as rapid heating. It can be heated regardless of the shape, depth and material of the heating body by modifying the shape of the frequency and the coil with a simple structure. In this paper, we implemented a low frequency welding preheating system using induction heating technique and observed the temperature changes of coil resistance, inductance and automotive transmission parts according to the height of each transmission in winding coil for three kinds of automotive transmission parts. We confirmed that the change of current is a very important factor in the low frequency heating.

• The Journal of the Korea Contents Association
• /
• v.12 no.7
• /
• pp.368-377
• /
• 2012

The comprehensive countermeasures against school violence recently announced by the government include some content on physical education classes. Physical education has long been ignored in school paradoxically in spite of the deteriorating physical strength and health of adolescents. The physical education subject undervalued in the middle of overly excessive competitions for college entrance exams finds its core goal in whole person education and officially emphasizes the development of personality aspects, which means that physical education claims important significance by providing diverse approaches to school violence prevention. This study thus set out to enhance the roles of physical education for school violence prevention. In Korean society, school violence has taken deep root due to the combined results of individual, family, school and community factors, the growth-first policy driven by compressed modern growth, and neoliberalism based on economic efficiency. School violence possesses such fixed value systems and convictions in Korean society. Education has failed to achieve some effectiveness because of the serious level of school violence, which calls for assessment of ideology having big impacts on educational environments. Given that it has been rediscovered that physical education has legitimacy of alleviating or preventing school violence through its value, an alternative to eradicate school violence should start with physical education normalization in school. Specific alternatives including the activation of sports clubs in school will be established as more fundamental practical alternatives when accompanied by the development of school violence-related programs and the operation of in-service training programs for physical education teachers.