• 한국벤처창업학회:학술대회논문집
• /
• 2008.04a
• /
• pp.179-208
• /
• 2008

In this research, an empirical analysis was performed to determine the correlation between management performance and R&D investment for domestic venture businesses in each industry. Specifically, an empirical analysis for each industry was attempted not only to clarify the general hypothesis on the relationship between management performance and R&D investment for venture businesses but also to demonstrate that differences exist for each industry. Empirical analysis was conducted for eight industries with respect to the $2002{\sim}2006$ panel data extracted as investigative results from the "Investigation Report on Science and Technology R&D Activities" published by the Ministry of Science and Technology. Industrial classification was limited to the middle-level classification (2-digit) in the Korea Standard Industry Code (KSIC) owing to the limited number of panels. Although this research only verified the overall positive effect of R&D activities and funds for existing research on corporate value or productivity and management performance, it was able to document the difference for each individual industry and each business size unlike existing research.Furthermore, the reliability of the research results was enhanced by targeting companies that have been continuously conducting R&D and management activities using consistent 5-year panel data in the analysis. Again, this was something that existing research did not have. Finally, through the use of recent data from 2002 after the IMF economic crisis up to 2006 in the empirical analysis, this research proposed the problems due to the prevailing circumstances at the time of entering the advanced nation stage based on an empirical analysis; the prevailing problems during the pursuit of advanced nation status before the IMF crisis broke out were not tackled. The key empirical analysis yielded several results. First, capital and size of the labor force have a positive correlation with the management performance for the entire company or the venture business. This applies to all eight industries as the subjects of the analysis. Second, although the number of years since a company has been established can have positive or negative correlation with management performance for the entire company or venture business in specific industries, a definite overall trend cannot be identified. Third, R&D investment can be said to have an overall positive effect on corporate management performance. Fourth, the size of the research staff cannot be said to be a factor unilaterally affecting the management performance of the entire company or the venture business. Fifth, the number of years a research institute has been in operation, which was assumed to have a positive effect on the management performance of a company because of the accumulated R&D know-how -- definitely acts as a positive factor contributing to the management performance of a company.

• Clean Technology
• /
• v.26 no.2
• /
• pp.151-157
• /
• 2020

Rapid urbanization has elevated the risk of urban flooding due to the increase in the impervious surface, causing environmental disasters and environmental pollution problems, such as lowering the groundwater level and increasing water pollution. In Korea, low impact development (LID) techniques have been introduced to minimize these environmental impacts and maintain the water cycle soundness. However, most small-scale development projects are in blind spots because there is no legal basis for rainfall runoff management. Small-scale development projects that increase the surface runoff of rainwater are required to mandate the application of LID facilities in accordance with the polluters' responsibility principle. Therefore, it is necessary to implement a preliminary consultation system for water cycle recovery. This study focuses on the cost-benefit analysis on the application of LID techniques for small-scale development projects. The scale of nationwide small-scale development projects used for cost-benefit analysis were defined as buildings with a land area of more than 1,000 ㎡ or a total floor area of 1,500 ㎡. As a result of analyzing the cost-benefits from the installation of LID facilities, they were found to be much lower than the economic standard value of 1. This might be due to the high cost of facilities compared to the scale of the project. However, considering the overall environmental value of improving the water environment and air quality by the installation of LID facilities and the publicity of reducing the operating cost of sewage treatment facilities, the introduction of a prior consultation for small-scale development projects is inevitable. In the future, institutional and financial support from local governments is required to improve the cost-benefits with the introduction of a prior consultation for small-scale development projects.

• Journal of Korean Society of Environmental Engineers
• /
• v.34 no.6
• /
• pp.414-420
• /
• 2012

In an effort to commercialization of energy saving aeration apparatus, panel-type aeration membranes were prepared from polyurethane sheet of J company in Korea having tensile strength higher than $400kg_f/cm^2$ with thickness of 0.5mm. Micropores of 100 m size were made by poring technique utilizing needles. From lab-tests in 450 L water tank at temperature of $20^{\circ}C$, the performance of aeration panels at 40 L/min aeration rate showed 5 mg/L DO in less than 3 minutes approaching saturation point of 8 mg/L within 8 minutes. The results show very high efficiency with $K_{La(15)}$ ($16.34hr^{-1}$), Standard oxygen transfer efficiency (SOTE 54.7%) and Standard aeration efficienct (SAE 7.88 kg/kwh). Other pilot scale test in a $2m^3$ water tank with water temperature ($19^{\circ}C$) and aeration rate (30 L/min) showed DO exceeding 5 mg/L within 8 minutes along with $K_{La(15)}$ ($5.8hr^{-1}$), SOTE (42.1%) and SAE (6.41 kg/kwh). These efficiencies represent 2~2.5 times higher than conventional aeration devices. Especially, the achievement of higher Oxygen Transfer Rate indicate higher commercial viability. Conventional aeration devices when applied to clean water and wastewater frequently cause problems due to differences in actual Oxygen Transfer Rate. Our actual tests with $40^{\circ}C$ animal farm wastewater resulted very high efficiencies with Oxygen transfer efficiency ($OTE_f$ 22.1%) and $OTE_{pw40}$ (39.6%).

• Journal of Korean Society of Forest Science
• /
• v.32 no.1
• /
• pp.29-35
• /
• 1976

In order to estimate sawmill productivities, rates of technical change and optimum combination of production factors, Cobb-Douglas production functions have been derived using data obtained from 96 sample mills in Busan-Incheon, southwestern and northeastern areas. The results may be summarized as follows: 1. There is a tendency of expanding average sawmill size in the areas. The horse-power holdings per mill have been increased at the rates of 91 percent in Busan-Incheon, 7.7 percent in southwestern and 16.9 percent in northeastern areas. This implies that the mills around log-importing ports have made rapid development, compared with those in forest regions. 2. The regression coefficients (production elasticities) of the functions for the year of 1967 in the above three areas are much similar each other, but significant differencies are found in the production functions of 1975. In other words, sawmill productivity was mainly restricted by capital deficiencies in all areas in 1967, but this situation was succeeded only by N-E area in 1975. The range of sum of regression coefficients is 1.0437-1.4214, this indicates increasing rates of return to scale. 3. The annual rates of technical changes in B-I, S-W and N-E areas for the observed period are 17.6, 7.6 and 2.2 percents respectively. Busan-Incheon is the only area where labor productivity is higher than that of capital. 4. The best combination of production factors for maximizing firm's profit is subject to the changes of input and output prices. With some assumptions of prices and costs, the optimum levels of power and labor input in B-I, S-W and N-E areas are 57:17, 427:94 and 192:27.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.3 no.1
• /
• pp.1-28
• /
• 2008

In this research, an empirical analysis was performed to determine the correlation between management performance and Empirical Research on the R&D investment for domestic venture businesses in each industry. Specifically, an empirical analysis for each industry was attempted not only to clarify the general hypothesis on the relationship between management performance and R&D investment for venture businesses but also to demonstrate that differences exist for each industry. Empirical analysis was conducted for eight industries with respect to the $2002{\sim}2006$ panel data extracted as investigative results from the "Investigation Report on Science and Technology R&D Activities" published by the Ministry of Science and Technology. Industrial classification was limited to the middle-level classification (2-digit) in the Korea Standard Industry Code (KSIC) owing to the limited number of panels. Although this research only verified the overall positive effect of R&D activities and funds for existing research on corporate value or productivity and management performance, it was able to document the difference for each individual industry and each business size unlike existing research. Furthermore, the reliability of the research results was enhanced by targeting companies that have been continuously conducting R&D and management activities using consistent 5-year panel data in the analysis. Again, this was something that existing research did not have. Finally, through the use of recent data from 2002 after the IMF economic crisis up to 2006 in the empirical analysis, this research proposed the problems due to the prevailing circumstances at the time of entering the advanced nation stage based on an empirical analysis; the prevailing problems during the pursuit of advanced nation status before the IMF crisis broke out were not tackled. The key empirical analysis yielded several results. First, capital and size of the labor force have a positive correlation with the management performance for the entire company or the venture business. This applies to all eight industries as the subjects of the analysis. Second, although the number of years since a company has been established can have positive or negative correlation with management performance for the entire company or venture business in specific industries, a definite overall trend cannot be identified. Third, R&D investment can be said to have an overall positive effect on corporate management performance. Fourth, the size of the research staff cannot be said to be a factor unilaterally affecting the management performance of the entire company or the venture business. Fifth, the number of years a research institute has been in operation, which was assumed to have a positive effect on the management performance of a company because of the accumulated R&D know-how -- definitely acts as a positive factor contributing to the management performance of a company.

• 선박안전기술공단연구보고서
• /
• s.4
• /
• pp.1-108
• /
• 2007

2007. 7. 23 IMO의 NAV(항해안전전문위원회)53차 회의에서는 e-Navigation을 해상에서의 안전, 보안, 해양환경보호를 목적으로 전자적인 수단에 의해 선박과 육상에서 해양정보를 수집, 교환, 표시함으로써 항구와 항구간의 항해 및 관련된 서비스를 향상시키는 것으로 정의하고 있다.2005년 11월 영국의 교통부 장관 Stephen 박사는 Royal Institute ofNavigation에서의 연설에서 해상안전과 환경보호를 위하여 선박의 항해를 감시하는 관제소 및 항행하는 선박에 유용하고 정확한 정보가 더 많이 필요함을 역설하였다. 그리고 첨단 기술에 의해 자동화된 항공 항법분야를 예로들면서, 선박의 항법 분야도 항해와 관련된 모든 시설 및 작업을 전자적 수단으로 대체하는 개념인 e-Navigation으로 전환되어야 하며 영국은 이에 필요한 작업을 주도하겠다는 의견을 피력하였다. Stephen은 e-Navigation 도입으로 얻을 수 있는 이익으로 첫째, 항해 실수로 인한 사고 확률저감, 둘째,사고 발생 시 인명 구조 및 피해 확산을 위한 효율적 대응, 셋째, 전통적인항해시설 설치 불필요로 인한 비용 저감, 넷째 선박입출항 수속의 간편화 및항로의 효율적 운용으로 인한 상업적 이익 등을 들었다. 반면에e-Navigation 체계로 전환 시 예상되는 장애로는 첫째, 체계 구축을 위한 비용(특히 개발도상국가들의 경우 어려움 예상), 둘째, e-Navigation의 성과 달성을 위하여 세계 전 해역의 모든 선박이 e-Navigation 체계에 동참하도록유도하는 문제, 셋째, 전자해도 표시 및 선교 장비들에 대한 표준화 문제, 넷째, 육상에 설치할 e-Navigation 센터의 설계 및 구축 등을 꼽았다.IMO는 2005년 81차 MSC(해사안전위원회) 회의에서 영국이 일본, 마샬아일랜드, 네덜란드, 노르웨이, 싱가포르, 미국과 공동으로 제안한 ‘e-Navigation전략 개발’ 의제를 2006년 82차 MSC 회의에서 채택하고, NAV(항해 전문위원회)를 통하여 2008년까지 e-Navigation의 구체적 개념을 정립하고 향후 개발하여야 할 전략적 비전과 정책을 수립하기로 하였다. 이어서 영국을 의장으로 e-Navigation 전략개발 통신작업반이 구성되었는데, 지난 년간 19개국, 16개 전문기관이 참여하여 아래의 작업이 수행되었다. ○ e-Navigation 개념의 정의와 목적 ○ e-Navigation에 대한 핵심 이슈 및 우선 순위 식별 ○ e-Navigation 개발에 따른 이점과 단점의 식별 ○ IMO 및 회원국 등의 역할 식별 ○ 이행계획을 포함한 추가 개발을 위한 작업계획의 작성 IMO에서 수행되고 있는 e-Navigation 전략 개발 의제 일정은 2008년까지이다. 이 전략 개발에 있어서 중요한 요소는 e-Navigation이 포함할 서비스범위, 포함하는 서비스 제공에 필요한 인프라 및 장비의 식별, 인프라 구축및 운용비용을 부담할 주체에 대한 논의, e-Navigation으로 인한 이익과 투자비용에 대한 비교 분석 등이다. 이 과정에서 정부, 선주, 항만운영자, 선원등의 입장 차이와 선진국과 개발도상국 간의 경제 수준 차이는 전략 개발에있어 큰 어려움을 줄 것이므로, 이들이 합의된 전략을 만들기 위해서는 예정된 기간보다 다소 늦어질 가능성도 있다.e-Navigation 전략 개발이 완료되면 1단계로는 해상교통 관제시스템, 선박선교 장비, 무선 통신장비 등에 대한 표준화 작업이 이루어질 것이다. 이 과정에서 각국 간에 자국 보유 기술을 표준화시키기 위한 경쟁이 치열할 것으로 예상된다. 2단계에서는 e-Navigation 체계 하에서의 다양하고 풍부한 서비스 제공을 위한 관련 소프트웨어 및 하드웨어의 개발이 이루어질 것으로전망되는데, 이는 지난 10년간 육상에서 인터넷망 설치 후 이루어진 관련 서비스 산업의 발전을 돌아보면 쉽게 짐작할 수 있을 것이다.e-Navigation 체계 하에서 선박의 항해는 현재와는 전혀 다른 패러다임으로 바뀔 것이다. 예를 들어 현재 입출항 시 요구되던 복잡한 절차는one-stop 쇼핑 형태로 단순화되고, 현재 선박 중심의 항해에서 육상e-Navigation 센터가 적극적으로 관여하는 항해 체계로 바뀔 것이며, 해상정보의 공유와 활용이 무선 인터넷을 통해 보다 광범위하게 이루어질 것이 다.e-Navigation의 잠재적 시장 규모는 선박에 새로이 탑재될 지능형 통합 항법시스템 구축과 육상 모니터링 및 지원 시스템 등 직접 시장이 약 50조원,전자해도, 통신장비, 관련 서비스 컨텐츠 등 간접 시장의 규모가 150조원으로 총 200조원으로 대략 추산하고 있다. 향후 이 거대한 시장을 차지하기 위한 전략 수립이 필요한 시점이다. 지금까지 항해 장비 관련 산업은 선진국의일부 업체들에 의해 독점되어 왔다. 우리나라는 조선과 해운에서 모두 선진국임에도 불구하고 이 분야에서는 대부분 수입에 의존해 왔다. e-Navigation체계 하에서는 전체 시장이 커지고 장비의 사양이 표준화됨에 따라 어느 소수 업체가 현재처럼 독점하기는 더 이상 어려울 것으로 예상된다. 따라서e-Navigation은 우리나라도 항해 장비 분야 시장을 차지할 수 있는 좋은 기회라고 할 수 있다. 특히 조선 1위의 장점을 적극 활용한다면 다른 나라보다우위의 경쟁력을 확보할 수도 있다. 또한, 서비스 분야의 시장은 IT 기술과밀접한 관계가 있으므로 IT 강국인 우리나라가 충분한 경쟁력을 갖고 있다고 할 수 있다.그러나, EU를 비롯한 선진국에서는 이미 e-Navigation 에 대비한 연구를10여년 전부터 수행해 왔다. 앞에서 언급한 EU의 MarNIS 사업은 현재 거의마무리 단계로 당장 실용화 할 수 있는 수준에 있는 것으로 보인다. 늦었지만 우리도 이를 따라잡기 위한 연구를 서둘러야 할 것이다. 국내에서도e-Navigation의 중요성을 깊이 인식하고, 2006년에는 관련 산학연 전문가들로 작업반을 구성하여 워크숍 등을 개최한 바 있다. 또한 해양수산부에서도e-Navigation 핵심기술 개발을 위한 연구사업을 기획 추진하고 있다.그러나 현재 항해통신장비들의 기술기준은 ITU의 전파규칙(RR)과 IMO결의 및 SOLAS 협약을 따르고 있는데 이들 규약이나 결의에 대한 국제적인 추이와 비교할 때 국내의 기술은 표준화되지 못한 부분이 많은 실정이다.본 연구에서는 e-Navigation sytem중 표준화가 필요한 요소와 전자해도,AIS 등 e-Navigation(통합전자항법시스템)관련 국내산업현황 실태조사를 통해 국내 e-Navigation기술개발 동향에 대해 조사하고자 한다.

• Journal of the Korean association of regional geographers
• /
• v.4 no.1
• /
• pp.99-120
• /
• 1998

The purpose of this study is to clarify the industrialization process, and locational factors and linkages of manufacturing in Jangyu-Myun, a suburb of Metropolitan Pusan, toward which heavy decentralization of manufacturing from Pusan has been done. Hard data and soft data were used as the basic data. Hard data used for this study were both the statistical data which consists of the number of establishments and employee classified by product type, firm size, organizational type and unit area(dong) which were listed in statistics yearbooks, and the list of the owner's names, addresses, employee number, products and headquarters of firms which were listed in firm directories. Soft data were the results of the interviews with the 53 owners of firms surveyed among the firms selected by Proportional Stratified Sampling Method. The major findings were as follows: (1) Manufacturing location in Jangyu-Myun was regularized in 1980's in which decentralization of manufacturing was activiated. Though the industrialization of study area resulted from the birth, relocation and establishment of branches of the firms originated from the other regions, the relocation of small outer-oriented firms from the central city was the most important factor among them. (2) The main locational factors which induced the decentralizing manufacturing from the central city into Jangyu-Myun are closely related to land, transportation, personal factor, raw material suppliers and market. (3) The differences of important locational factors by the size and organizational type of firms are relevant to the characteristics of manufacturing location. (4) The changes of linkages attendant upon locational changes of firms were not so great and were localized in labor supply and marketing. (5) The strength of linkages is strong in the procurement of materials, in the subcontraction and in the marketing, but not in the ordering. (6) The main factors influencing on the formation of linkages are different by the types of linkages: monopolistic and oligopolistic supply are important in procurement linkages; characteristics of products and production capacity in the subcontraction and ordering; characteristics of products and the subsequent difficulties, in the marketing. (7) With the exception of procurement linkages, the strength of linkages with the outside of the study area are stronger than the linkages with the inside. The strength of linkages with the outside has distance-decay-function and strong linkages with the central city. (8) These spatial characteristics of linkages are different by products type, firm size and organizational type of firms: the spatial ranges of linkages are wider in the multi-location firms than in the single-location firms; the larger the firm size, the wider the spatial range of linkages: there is no consistent trend by products type. In conclusion, some facts described above were proved to be consistent with the results of proceeding studies in the other areas: influence of central city manufacturing relocation on industrialization in the suburb: different decentralization by products type, firm size and organizational types of firms: different locational factors by products type, firm size and organizational types of firms; linkage changes attendant upon locational changes of firms; spatial differences of linkages by products type, firm size and organizational type of firms. Some other factors were proved to be partly consistent: locational factors and spatial characteristics of linkages. Accordingly I think that the results of previous studies on the other areas can be applicable to the explanation of the location and linkage of manufacturing in Jangyu-Myun. For the better explanation on the characteristics of manufacturing decentralization from the central city, more empirical case studies on the location and linkage of manufacturing in the suburb areas are necessary.

• Journal of Technology Innovation
• /
• v.17 no.2
• /
• pp.55-80
• /
• 2009

Technology innovation activity plays a pivotal role in constructing the entrance barrier for other firms and making process improvement and new product. and these activities give a profit increase and growth to firms. Thus, technology innovation activity can reduce the default risk of firms. However, technology innovation activity can also increase the firm's default risk because technology innovation activity requires too much investment of the firm's resources and has the uncertainty on success. The purpose of this study is to examine the effect of technology innovation activity on the default risk of firms. This study's sample consists of manufacturing firms listed on the Korea Securities Market and The Kosdaq Market from January 1,2000 to December 31, 2008. This study makes use of R&D intensity as an proxy variable of technology innovation activity. The default probability which proxies the default risk of firms is measured by the Merton's(l974) debt pricing model. The main empirical results are as follows. First, from the empirical results, it is found that technology innovation activity has a negative and significant effect on the default risk of firms independent of the Korea Securities Market and Kosdaq Market. In other words, technology innovation activity reduces the default risk of firms. Second, technology innovation activity reduces the default risk of firms independent of firm size, firm age, and credit score. Third, the results of robust analysis also show that technology innovation activity is the important factor which decreases the default risk of firms. These results imply that a manager must show continuous interest and investment in technology innovation activity of one's firm. And a policymaker also need design an economic policy to promote the technology innovation activity of firms.

• Fire Science and Engineering
• /
• v.31 no.4
• /
• pp.95-102
• /
• 2017

The fires in the traditional markets often occur recently with the most of them expanded into great fires so that the damage is very serious. The status of traditional markets handling the distribution for ordinary people is greatly shrunk with the aggressive marketing of the local large companies and the foreign large distribution companies after the overall opening of the local distribution market. Most of the traditional markets have the history and tradition from decades to centuries and have grown steadily with the joys and sorrows of ordinary people and the development of the local economy. The fire developing to the large fire has the characteristics of the problem that the fire possibility is high since all products can be flammable due to the deterioration of facilities, the arbitrary modification of equipment, and the crowding of the goods for sale. Furthermore, most of the stores are petty with their small sizes so that the passage is narrow affecting the passage of pedestrians. Accordingly, the traditional markets are vulnerable to fire due to the initial unplanned structural problem so that the large scale fire damage occurs. The study is concerned with systematically classifying and analyzing the result by applying the TRIZ tool to the fire risk factors to extract the fundamental problem with the fire of the traditional market and make the active response. The study was done for preventing the fire on the basis of it and the expansion to the large fire in case of fire to prepare the specific measure to minimize the fire damage. On the basis of the fire expansion risk factor of the derived traditional market, the study presented the passive measures such as the improvement of the fire resisting capacity, the fire safety island, etc. and the active and institutional measures such as the obligation of the fire breaking news facilities, the application of the extra-high pressure pump system, the divided use of the electric line, etc.

• Journal of Environmental Impact Assessment
• /
• v.30 no.6
• /
• pp.339-354
• /
• 2021

The purpose of this study is to provide valuable information and data by analyzing the environmental status and potential forrenewable energy projects (or plans) based on environmental assessment (EA) data, so that more objective and scientific environmental assessments can be conducted. The study also suggests regional directions that could satisfy the goals of nature conservation and renewable energy. Based on the analysis of EA data that was conducted up until June 2019, the study analyzed the size, location and characteristics of both onshore wind power and onshore photovoltaic. The environmentally available potential by region was also derived by considering the main constraints and requirements related to the potential siting ofrenewable energy projects at the EA. Based on EA data, 63 out of 80 (79%) onshore wind power projects are shown to be located in mountainous areas. For onshore photovoltaic projects, a total of 7,363 projects were subjected to environmental assessment over the country. The environmentally potential area for onshore wind power, considering all the environmental regulatory factors, is 2,440 km². For onshore photovoltaic, the environmentally available area estimated as idle farmland is 2,877 km². The distribution and characteristics of the environmentally available potential of the region may be the most important factor that local governments should bear in mind in terms of promoting renewable energy development projects in the region. Based on the results of this study, even if we consider the national energy plan including the expected future increase, as well as environmental goals and socio-economic acceptance through an environmental assessment, the available resources forrenewable energy projects are not insufficient. It is possible to examine the adequacy of the target distribution rate of renewable energy sources by region taking into consideration the quantitative and scientific results such as the environmentally available potential data derived from this study.