• Korean Journal of Organic Agriculture
• /
• v.24 no.4
• /
• pp.699-717
• /
• 2016

This study was carried out to investigate the effect of no-tillage on sequential cropping supported from recycling of first crop ridge on the growth of pepper plant and physical properties of soil under green house condition. 1. Degree of crack on soil by tillage and no-tillage Soil cracks found in ridge and not found in row. At five months of tillage, crack number and crack length in length ridge were 3 and 37~51 cm in tillage. Maximum width and maximum depth in length ridge were 30 mm and 15.3cm in tillage. Crack number and crack length in width ridge were 7.5 and 7~28 cm in tillage. Maximum width and maximum depth in width ridge were 29 mm and 15.3 cm in tillage. At a year of no-tillage, crack number and crack length in length ridge were 1.0 and 140~200 cm in tillage. Maximum width and maximum depth in length ridge were 18 mm and 30 cm in a year of no-tillage. Crack number and crack length in width ridge were 11 and 6~22 cm in a year of no-tillage. Maximum width and maximum depth in width ridge were 22 mm and 18.5 cm in a year of no-tillage. Soil crack was not found at 2 years of no-tillage in sandy Jungdong series (jd) soil. Soil crack was found at 7 years of no-tillage in clayish Jisan series (ji) soil. 2. Penetration resistance on soil Penetration resistance was increased significantly at no-tillage in Jungdong series (jd). Depth of cultivation layer was extended at no-tillage soil compared with tillage soil. Penetration resistance of plow pan was decreased at 1 year of no-tillage compared with than tillage soil. Penetration resistance was linearly increased with increasing soil depth at tillage in Jisan series (ji). Penetration resistance on top soil was remarkably increased and then maintained continuously at no-tillage soil. 3. Drainage and moisture content of soil Moisture content of ridge in top soil was not significant difference at both tillage and no-tillage. Moisture content of ridge in 20 cm soil was 14% at no-tillage soil and 25% at tillage soil. 4. Change of capacity to retain water in soil Capacity to retain water in top soil was not significant difference at 1 bar both tillage and no-tillage. Capacity to retain water in soil was slightly higher tendency in 1 year and 2 years of no-tillage soil than tillage soil. Capacity to retain water in soil was increased at 15 bar both tillage and no-tillage. Capacity to retain water in subsoil was slightly higher tendency at 1 bar and 3 bar in 2 years of no-tillage than tillage soil and a year of no-tillage soil.

• Journal of Biosystems Engineering
• /
• v.24 no.3
• /
• pp.195-208
• /
• 1999

A computer simulation was carried out to investigate draft characteristics of Korean paddy field for obtaining the basic reference to the selection of optimum moldboard type suitable for Korean paddy field conditions. Cylindrical, cylindroidal, semihelical moldboard plows, and one type of oriental Janggi were used for simulation. A series of soil bin experiments was conducted to compare the experimental results with the predicted drafts from computer simulation using the cylindroidal moldboard plow. The computer model predicted draft force with 1~12% error at 12~16cm plowing depth which is the most conventional plowing depth in the rural area in Korea. Thus, the computer model was considered to be good enough for simulation. Due to the different plowing width of experimental plows, specific draft was selected for comparison by computer simulations. Specific draft of cylindrical moldboard plow was ranged from 3 to 6 N/$\textrm{cm}^2$ according to the soil conditions, plowing speed and plowing depth, 2.5~3.0 N/$\textrm{cm}^2$ for semihelical moldboard plow.

• Current Research on Agriculture and Life Sciences
• /
• v.4
• /
• pp.95-101
• /
• 1986

A computer-controlled automatic vibratory tillage test equipment which attained minimum draft and power was developed. Three control program modes were developed and tested with this equipment. A computer simulation investigated the control performances of the above modes with the following primary results. 1) All of the three control modes converged to the same steady state when the velocity ratio was kept constant. 2) The control mode in which the blade frequency was twice of the soil shearing frequency (frequency control mode) showed optimum control with minimum draft and power, and also had greatest velocity convergence. 3) Results of the simulations showed the frequency control mode to have achieved the best control performance. The fluctuation of the draft reduction was less than 10% at various cutting depths and soil moistures.

• Korean Journal of Soil Science and Fertilizer
• /
• v.44 no.5
• /
• pp.688-695
• /
• 2011

This study was carried out for some survey about soil compaction in the multi-cropping system of paddy field. Investigated sites were 90 farmer's fields in south-eastern part of Korea. The tillage practices season was different according to cropping system of paddy; in spring for mono rice cultivation and in autumn for the multi-cropping field. The average tillage depth in investigated sites was about 25 cm, however, it is different between the farmer's tillage practices and soil characteristics. It is high correlation to tillage deep and minimum resistance of penetration. The reaching soil deep to maximum resistance of penetration was about 27 cm, and average penetration resistance of the deep is 1.8~2.0 MPa for moderately fine-textured soils and more than 3.0 MPa for moderately coarse-textured soils. The difference of penetration resistance between cultivating and compacted layer was in order to sandy loam > clayey loam > clayey, and the difference was lesser in poorly drained soils than somewhat poorly ones. In the rice mono cropping field, the maximum resistance in no-tillage for 15 years was 1.18~1.25 Mpa at 20~25 cm in soil deep, however, the resistance of field with every year tillage practices was 2.03~2.21 Mpa. In the extremely compacted sandy loam textured soils, the penetration resistance at 30 cm in soil depth was drastically reduced by the subsoil from 5.2 Mpa to 3.2 Mpa, and the watermelon root in plastic film house was deep elongated.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1996.06a
• /
• pp.203-208
• /
• 1996

• Korean Journal of Soil Science and Fertilizer
• /
• v.43 no.1
• /
• pp.105-112
• /
• 2010

Applications of plant residues and green manures generally improve the properties of soil under conventional farming system. Therefore, we investigated the improvement of selected soil physical properties, bulk density, porosity, and water content, soil penetration resistance, and soil microbial biomass carbon (SMBC) content as affected by different management practices: 1) conventional tillage without rice straw or green manure crop treatment (TNT, check plot), 2) no-tillage amended with rice straw (NTRS), 3) no-tillage amended with rye (NTR), 4) no-tillage amended with Chinese milk vetch (NTCMV), 5) no-tillage without rice straw or green manure crop treatment (NTNT), The values of bulk density, porosity, and water content ranged from 1.22 to 1.37 Mg $m^3$, from 48.3 to 54.0%, and from 35.0 to 40.2%, respectively. The management practices might positively influence the changes in the selected soil properties, especially in the second experimental year. The soil penetration resistance and SMBC content were also improved after applying rice straw and green manure crops as comparing with TNT. Therefore, applications of the rice straw and green manure crop management practices under no-tillage system positively influenced soil physical properties and soil microbial activities in paddy field.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2017.04a
• /
• pp.72-72
• /
• 2017

국내 농업에서 토양의 반전, 쇄토, 배토, 가능한 복합작업기인 무동력 디스크해로우 방식의 경운과 배토 고효율 복합작업기의 수요가 증가 하고 있다. 경운작업에서 일련의 과정은 작물의 생육과 관리차원에서 큰 의미를 지니며 작물재배의 첫 단계로 중요시 다루어져야할 과정이다. 이러한 작업기의 성능 시험에서 포장시험을 통해 복합기의 신뢰도와 실제 필드에서 발생하는 문제들을 포괄적으로 해결 할 수 있는 방안이 필요하다. 토양 경작을 위한 농업기기의 작업 저항은 식물 생산에서 유용성을 평가하는 가장 중요한 지표중 하나이다. 작업 저항(수평, 수직 방향의 힘)은 트랙터의 힘에 의해 생성된 동작을 방해하므로 토양 경운 시 에너지 소비를 결정하고 설계 매개 변수 측면에서 최적의 작업 조건을 결정하는 데 중요한 영향을 미친다. 따라서 본 연구에서는 경상대학교 내 위치한 실험동에서 Soil-bin에 이송장치를 설치한 후, 이송장치에 디스크 해로우 (Multidisc Vario, Tulip Agri., Netherlands)를 부착하여 실험을 진행하였다. 디스크 해로우의 원주 평면과 수직 평면 사이의 각 a(토양 표면에 수직)와 디스크의 해로우의 원주 평면과 작업 방향 사이의 각 b의 값을 독립 변수로 두고 a, b를 변화 시키면서 발생하는 이송장치의 견인력을 측정하여 농가 및 효율적인 경운작업 시 기초자료로 활용하고자 한다.

• Journal of Biosystems Engineering
• /
• v.4 no.1
• /
• pp.58-66
• /
• 1979

동력경운기용 두류의 무경운 파종기에 부착하여 사용하는 구절기중에서 소요견인력이 작고 구절작업정도가 양호한 구절기의 개발을 위한 기초자료를 얻기 위하여 구동식 토조에 인공강토를 채우고 원판형 및 호우형 구절기의 소요견인력과 이에 영향을 미치는 인자들의 관계를 구명코자 실내모형 확험을 실시하여 다음과 같은 결과를 얻었다. 원판형 구절기에 대하여 직경별로 조립각을 $8^{\circ}$ 와 $16^{\circ}$, 경심을 3 cm 와 6cm로 변화시키면서 2.75cm/sec의 속도로 견인력을 측정한 결과 원판의 직경이 약 28cm인 경우에 견인력이 최소로 나타났고, 직경이 이보다 크거나 작은 때는 견인력이 증가하는 경향을 나타냈으며 비저항도 대체로 비슷한 경향이었으나 원판의 직경이 약 30cm 일 때 최소로 나타났다. 종자파종의 심도조절을 목적으로 작구심(3cm 및 6 cm)과 견인력과의 관계를 조사하였던바, 경심과 견인력과의 관계는 거의 직선적인 변화를 나타냈으며 견인력에 영향을 미치는 인자중에서 경심의 영향이 가장 컸음을 알 수 있었다. 일반적으로 조립각 미 주행속도에 별 영향없이 경심 3cm 및 6 cm 공히 견인력은 직경 약 28 cm에서 , 비저항은 약 30cm에서 최소의 값을 나타내었다. 파종기의 작업성능과 관계가 깊은 주행속도 및 파시의 조절을 목적으로 원판의 조립각과 주행속도가 견인력에 미치는 영향을 조사했던 바, 조립각과 주행속도가 증가함에 따라 모두 견인력이 증가하는 경향을 나타내었으나 견인력에 미치는 영향은 주행속도가 더욱 크게 나타났다. 원판형 구절기와 호우형 구절기를 비교하기 위하여 쐐기각이$16^{\circ}$ 이고 리프트 각이 $20^{\circ}$ 인 호우형 구절기와 조건이 비슷한 조립각$16^{\circ}$ 의 원판형 구절기의 견인특성을 비교한 결과 직경 30cm 인 원판형의 경우는 비저항이 0.35-0.5kg/$cm^2$인데 비해 호우형의 경우는 0.71-1.02kg/$cm^2$로 나타나 호우형의 견인저항력이 평균 2 배정도 크게 나타났고 작구상태고 원판형의 경우보다 불량하였다.

• Journal of Biosystems Engineering
• /
• v.22 no.2
• /
• pp.117-126
• /
• 1997

A series of soil bin experiment was carried out on sandy loam to investigate if it is possible to predict implement draft by some analog tool. Chisel configuration resembling a cone penetrometer section was used as an analog tool. The angle of cone was 30 degree. Three types of tillage implement, or oriental janggi, moldboard plow and chisel plow were chosen for this study. Experimental tillage speed was 0.22, 0.33, 0.49 m/s ad tillage depth was 8, 12, 16cm. For the experimental tillage speed range, the increase of tillage speed did not affect the tillage draft for the three types of implement and analog tool, but as the tillage depth increased, tillage draft of the three types of implement and analog tool increased linearly. The linear relationship was found between the tillage draft of analog tool and that of three types of tillage implement for the experimental tillage depth and speed range with high value of $R^2$ Thus it was concluded from the above results that an analog tool can be used to predict the tillage draft of oriental janggi, moldboard plow and chisel plow. But more experiment for various soil types and theoretical verification are needed for more generallization.

• Korean Journal of Agricultural Science
• /
• v.13 no.1
• /
• pp.103-112
• /
• 1986

This study was carried out to prevent the entwining of rice straw on rotary shaft and blade where rice straw was spreaded on paddy field as an organic source before rotary tilling. The rotary tillage was conducted in the paddy field having the soil moisture contents of 30%, 39%, 59% in dry basis and spreaded rice straw (450kg/10a) of 30cm, 45cm, 90cm length with the edged curve angles of rotary blade of $30^{\circ}$, $40^{\circ}$, $50^{\circ}$, $55^{\circ}$ at Yuseung area. And the test were performed on the plot which has width of 30cm and 5cm length and the quantity of entwined rice straw was analized. The test results were summarized as the followings. 1. Entwining phenomenon of rice straw was decreased as the blade edged curve angle increased. The edged curve angle of rotary blade must be determind by considering the characteristics of soil cutting resistance, tilling torque and entwining phenomenon of rice straw. But according to the entwining phenomenon of rice straw only, the edged curve angle of rotary blade should be bigger than $55^{\circ}$ for design. 2. Amount of entwining rice straw was minimized when soil moisture contents was 30 percent (d. b.). It would be better that rotary tillage is performed when soil moisture contents is lower than 30 percent in dry basis. 3. Amount of entwining rice straw was minimized when the length of rice straw was 30cm with $55^{\circ}$ edged curve angle. Therefore, it would be better to chop rice straw as 30cm. 4. Entwining phenomenon of rice straw was decreased as the forward speed decreased. To decrease the entwining rice straw, rotary tillage should be done with forward fist gear (0.35m/s).