• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2013.10a
• /
• pp.206-213
• /
• 2013

Transient response of a crack in a functionally graded piezoelectric material (FGPM) interface layer between two dissimilar homogeneous piezoelectric layers under anti-plane shear is analyzed using integral transform approaches. The properties of the FGPM layer vary continuously along the thickness. Laplace and Fourier transforms are used to reduce the problem to two sets of dual integral equations, which are then expressed to the Fredholm integral equations of the second kind. Numerical values on the dynamic energy release rate (DERR) are presented for the FGPM to show the effects on electric loading, gradient of the material properties, and thickness of the layers. Computed results yield following conclusions: (a) the DERR increases with the increase of the gradient of the material properties of the FGPM layer; (b) certain direction and magnitude of the electric impact loading impedes crack extension; (c) increase of the thickness of the FGPM layer and the homogeneous piezoelectric layer which has larger material properties than those of the crack plane are beneficial to increase of the resistance of transient fracture of the FGPM layer.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.563-567
• /
• 2015

우리나라 하천관리의 패러다임은 1990년대 이후 기존의 치수 및 이수능력을 고려함과 동시에 하천환경의 보전 및 복원을 새로운 목표로 설정한 자연친화적 방식으로 변화되었다. 하천법령 및 제도적 측면에서도 수자원 장기종합계획 및 유역 종합 치수계획은 하천의 환경보전 및 다목적 이용계획을 포함하도록 규정하고 있으며, 국내 하천법에 따르면 하천기본계획 수립 또한 자연친화적 하천조성 및 이와 관련된 보전지구 지정 등을 포함하도록 규정하고 있다. 하천설계기준, 자연 친화적 하천관리에 관한 통합지침, 또는 수자원 장기종합계획에서 적용하고 있는 하천환경조사 및 평가지표는 서로 다를 뿐만 아니라 과학적인 근거가 명확하지 않는 등 국가차원의 표준화가 이루어지지 못한 상태라 할 수 있다. 1990년대 이후 미국, 독일, 영국, 호주 등 선진국들은 하천환경 복원사업의 추진과정에서 복원사업의 타당성 제고 및 성공적인 사업수행을 위하여 그들 국가의 하천특성에 적합한 하천환경 평가 체계를 구축한 바 있으며, 이들 평가체계는 새로운 과학적 지식과 기술의 축적에 힘입어 지속적으로 발전되고 있다. Fujita의 유형화(Segment 분류)법에 의하면, 하천구간(Segment)은 하상경사, 하상재료, 식생, 생태 등이 통계적으로 동질인 하천 구간으로서, 하도 특성과 하천생태계 공간을 구분하는 단위이다. 자연하천에서 동일한 경사를 갖는 하천구간은 하상재료, 소류력, 저수로 폭, 수심 등이 대체로 동일한 값을 나타내고 있으며, 하도 특성을 지배하는 주요 인자로 각 하천의 평균 연최대유량, 하상재료의 대표입경, 하상경사 등을 설정하고 있다. 본 연구에서는 하천구간을 유형화하는 기준을 하상경사로 적용하여 평가단위를 분류하였으며, 평가체계는 미국의 USEPA를 한국형 하천환경에 맞도록 수정보완 하였다. 특히 미국의 USEPA의 지표 중 하안영역의 식생피복, 하반림 등은 생물분야 식생영역과 상충되어 제외하고 우리나라 특성에 적합한 하천횡단형상, 하천횡단 구조물 등의 평가기준을 재정립하여 내성천에 평가적용 분석하였다. 하천환경의 수리 및 하도 특성 평가기준 개발에 따라 평가체계의 개념적 틀을 토대로 통합적이고 표준화된 한국형 하천평가기준 개발을 위한 방법론을 정립하고, 나아가 하천환경의 지속가능성을 전제로 한 하천복원사업의 장 단기적 성공 여부를 평가할 수 있는 실무지침의 과학적 근거를 제시하고자 한다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2021.06a
• /
• pp.229-229
• /
• 2021

최근 이상기상으로 국지성 집중호우가 빈번하게 발생함에 따라 토사유출에 의해 피해가 증가하고 있다. 급경사 사면을 갖는 교란산지와 개발지의 경사면은 토양침식 위험에 노출되어 있다. 특히 지표유출수의 집중흐름에 의한 세류발달은 세류간침식에 비해 많은 토양침식과 토사유출을 발생시킨다. 이러한 급경사 사면에서의 세류발달에 대한 수리학적 메터니즘과 한계조건을 파악하고자 강우와 유입수 모의를 통한 토양침식 실험을 수행하였다. 강우와 유입수의 상호작용에 의한 세류발달의 특성과 토사유출량 증가를 파악하고자, 강우량의 증가와 유입수 유무에 따른 실험이 이루어졌다. 강우강도의 범위는 100~140mm/hr이고, 유입수는 170ml/s 이였다. 유입수량은 합리식으로 계산하였으며, 토양상자 상단에서 균등분사식으로 유입되었다. 세류발달의 수리학적 특성치를 취득하기 파악하기 위해, 염료주입 지표수 거동에 대한 동영상을 판독하였다. 세류발달은 유입수가 없는 경우 3분 이내 그리고 유입수가 있는 경우 30초 이내에 발생하였다. 토양상자내의 평균 유속범위는 7.83~29.27 cm/s 이였다. 실험에서 발달된 세류는 15분경과 후부터 평형상태를 유지하였다. 경사실험조건별로 세류 차수분석을 위해 각 세류의 최대길이, 폭, 넓이를 측정한 결과 세류의 차수는 강우만 있는 경우 1~2차로 발달하였으며, 유입수가 있을 때는 2~3차로 발달하였다. 지표유출이 증가하면서 세류발달의 개수는 줄었지만 규모는 더 크게 나타났다. 세류가 발달하는 시점의 한계유속은 10~20cm/s 범위인 것으로 파악되었다. 지표유출이 증가하면서 세류의 발달도 더 심화되지만, 동일한 강우에 일정시간동안 노출되면서 세류는 평형상태가 되어 더 이상 침식이 활발하게 진행되지는 않았다. 유입수가 있는 조건에서 수량은 약 2배가 증가하였지만, 토사유출량은 세류확장에 의해 약 4배가 증가하는 것으로 나타났다.

• Journal of the Korean Geotechnical Society
• /
• v.40 no.4
• /
• pp.155-167
• /
• 2024

In Korea, many solar power generation facilities are being installed in mountainous regions, which cover 70% of the country' area. This study aimed to analyze the slope characteristics of solar power generation facilities installed in such regions, considering the potential for mountain hazards. A database was created for 663 mountainous solar power generation facilities in Gangwon province, including data on area, slope angle, slope direction, altitude, and soil depth. GIS techniques were used to analyze the slope characteristics of these facilities. The area of solar power generation facilities installed in the Gangwon Mountains ranges from 606 to 320,718 m². We found that a notable number of these facilities have slopes exceeding the permit standards for mountain solar power installations and steep slope criteria. In addition, most facilities are located south, making them vulnerable to landslides. The correlation between soil depth and slope or topographical altitude was found to be quite low.

• Journal of the Korea Convergence Society
• /
• v.9 no.12
• /
• pp.175-180
• /
• 2018

In this study, CFRP was manufactured with the laminate angle of $45^{\circ}$. The specimen of TDCB bonded with the adhesive for structure was designed by CATIA and the analysis was progressed by using the finite element analysis program of ANSYS. This study model was designed on the basis of British industry and ISO standard and the configuration factor(m) was established with variable according to the angle of model configuration. As the study result of this paper, the maximum deformations at the specimens with the tapered angles of $4^{\circ}$ and $8^{\circ}$ become most as 12.628 mm and least as 12.352mm respectively. Also, the maximum equivalent stresses at the specimens with the tapered angles of $6^{\circ}$ and $8^{\circ}$ become most as 9210.3 MPa and least as 4800.5 MPa respectively. The damage data of TDCB structure with the laminate angle which was manufactured with CFRP could be secured through this study result. As the damage data of TDCB structure bonded with CFRP obtained on the basis of this study result are utilized, the esthetic sense can be shown by being grafted onto the machine or structure at real life.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.14 no.4
• /
• pp.273-279
• /
• 2011

Turbulent flow analysis around a wind turbine blade was performed to evaluate the power performance of offshore wind turbine. Fluent package was utilized to solve the Reynolds-averaged Navier-Stokes equations in non-inertial rotating coordinates. The realizable k-$\varepsilon$ model was used for turbulence closure and the grid system combining structured and unstructured grids was generated. In the first, lift and drag forces of 2-D foil section were calculated and compared with existing experimental data for the validation. Then torque and thrust of the wind turbine blade having NACA 4-series sections were calculated with fixed pitch angle and rpm. Tip speed ratio was varied by changing wind speed. In the next, three kinds of end plate were attached at the tip of blade in order to increase the power of the wind turbine. Among them the end plate attached at the suction side of the blade was found to be most effective. Furthermore, performance analysis with tilt angle and rake was also performed.

• Geotechnical Engineering
• /
• v.12 no.4
• /
• pp.47-60
• /
• 1996

Of the classical theories on lateral earth pressure, the Coulomb's and the Rankine's theories, which have been usually used in practice for design of retaining walls, assumed that the lateral earth pressure was a triangular distribution. However, the experimental results obtained by Terzaghi(1934), Tsagreli(1967), Fang & Ishibashi(1986), etc showed that lateral pressure were not triangular distribution. ' In this study, for rigid walls with inclined backfaces and inclined surfaces backfilled by $C-\phi$ soils, an analytical method of earth pressure distribution has been newly suggested by using the concept of the flat arch. The results calculated by the newly suggested equations were compared with ones by the existed theories. And'the influence factors of the earth pressures by the suggested equations were investigated. As a result, the thrusts obtained by this method agree well with those by the existing theories, except the Rankine's solution. It was showed that the height to the centre of pressure(h) depends mainly upon the inclinations of the backface and the backfilled surface, the angle of internal friction, and the adhesion between the wall and the backfilled soil, instead of 0.33H, where H is the wall height.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.8
• /
• pp.835-846
• /
• 2011

In medial opening wedge high tibial osteotomy (OWHTO), researchers have reported critical problems caused by unexpected changes in the tibial posterior-slope angle. This unexpected change can be analyzed, but there is no general solution for cases with an oblique hinge axis and cut plane. We propose a general analysis model for OWHTO. We first evaluate the effects according to variation in the hinge axis and tibial cut plane and then define an ideal correction axis. This ideal axis, called the virtual tibial correction axis, is not on the tibial cut plane in general. In this paper, we also present an evaluation of feasibility of the proposed analysis model.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.9
• /
• pp.1083-1091
• /
• 2013

The design of missile require extremely small warheads that must be highly efficient and lethal. The penetration characteristics of each penetrator and the total number of penetrators on the warhead are obvious key factors that influence warhead lethality. The design of the penetrator shape and size are directly related to the space and weight of the warhead. The design of the penetrator L/D was directly related to the space and weight of the warhead. L and D are the length and the diameter of the projectile, respectively. The AUTODYN-3D code was used to study the effect of penetrator penetration. The objective of numerical analysis was to determine the penetration characteristics of penetrator produced by hypervelocity impacts under different initial conditions such as initial velocity, obliquity angle and L/D of penetrator. The residual velocity and residual mass were decreased with increasing initial impact velocity under $L/D{\leq}4$.

• The Journal of the Acoustical Society of Korea
• /
• v.37 no.5
• /
• pp.285-291
• /
• 2018

In the present study, flow characteristics and wind noises around the sunroof opening are analyzed variation with panoramic sunroof deflector angle. A mesh deflector is attached to reduce wind noise while a car is driving with the panoramic sunroof opening. A new forward inclined type deflector was invented to improve wind noise. The effect of this new concept of mesh deflector on the open-panoramic flow characteristics and wind noises were studied with CAT (Computer Aided Test) and wind tunnel test, which shows the reduction of open-panoramic wind noises such as sunroof buffeting, sunroof booming, and turbulent noise. Therefore, the forward inclined type deflector can efficiently improve wind noise with the same production cost.