• Title/Summary/Keyword: 경사보

Search Result 907, Processing Time 0.026 seconds

Analysis of Fault Attitudes by Using Trajectories of the Maximum Longitudinal Displacement on Tunnel Face (터널 굴진면 최대 수평변위의 변화 양상에 따른 단층 자세 분석)

  • Yun, Hyun-Seok;Seo, Yong-Seok
    • The Journal of Engineering Geology
    • /
    • v.26 no.3
    • /
    • pp.393-401
    • /
    • 2016
  • In the present study, fault attitudes and the locations of appearance of faults in tunnel faces were predicted by analyzing the trajectory of the maximum longitudinal displacement immediately before the appearance of faults through three-dimensional finite element analysis. A total of 28 fault attitude models were used in the analysis. Those faults that have drives with dip appear first in the upper part of tunnel faces as tunnel excavation progresses and their maximum longitudinal displacement shows a tendency to move from the middle part to the upper part of tunnel faces. Those faults that have drives against dip appear first in the lower part of tunnel faces as tunnel excavation progresses and their maximum longitudinal displacement shows a tendency to move from the middle part or middle upper part to the lower part of tunnel faces. In addition, when the dip of faults is larger the maximum longitudinal displacement moves from the left upper part toward the wall part in the case of drive with dip models and from the left lower part toward the wall part in the case of drives against dip models. Therefore, it was indicated that the attitudes of faults distributed ahead of tunnel faces and the locations where faults appear in tunnel faces can be predicted by analyzing the longitudinal displacement trajectory of tunnel faces following excavation.

GIS spatial D/B formation of geothermal data and Distribution of Heat Flow of Korea (한국의 지열자료 GIS 공간 D/B 구축과 지열류량 분포)

  • Kim, Hyoung-Chan;Lee, Young-Min;Park, Jeong-Min
    • 한국신재생에너지학회:학술대회논문집
    • /
    • 2006.06a
    • /
    • pp.459-460
    • /
    • 2006
  • 현재 남한의 지열류량 측정값으로는 총 363개 지점의 자료가 측정 및 수집되어 있다. 이것은 Mizutani et at. (1970), 장정진 외(1970), 그리고 서정희(1976) 등의 자료, 총 35개의 자료도 추가된 것이다. 1989년 이후부터 측정된 지열류량 자료는 217개 자료이며(임정웅 외, 1989; 임정웅 외, 1996; Lim and Kim, 1997; 염병우 외, 1997), 모두 직접 측정한 것이나, 1989년 이후 보고된 지열류량 자료에 약간의 오류가 있어 이번 연구에서 수정 보완하였다. 또한 과거의 자료 35개 자료는 이미 지열류량 측정치가 논문화 되어 있는 것으로 암석시료는 없다 1989년 이후 2004년까지 자료 217개 2005년도 추가 자료 111개의 지열류량 자료는 암석시료도 있으며, 측정기기가 서로 달라 오차가 있을 수 있어 서로 보정을 해야 할 필요가 있어 시추공 주변 암석을 새로 수집해서 신장비로 다시 측정 보정하였다. 지열류량 D/B 구축은 각 자료의 일련번호, 고유번호 (Sn.), 위경도 좌표 (longitude, lattitude), 암석의 열전도도(thermal conductivity), 지온경사 (thermal gradient), 지열류량 (heat flow)등으로 구성되어 있다. 지열류량 자료 공간 데이터베이스는 점 속성을 가지며 자료형태는 각종 소프트웨어와 호환성이 좋은 shape 파일 형태로 작성하였다. 또만 최근 천부 토양 및 암석 열물성을 이용한 냉난방시스템 즉, Heat Pump System 설계를 위하여 반드시 들어가야 하는 요소인 열확산율, 공극율, 밀도, 비열 등 열물성 특성을 추가하여 GIS 공간 D/B구축하였다. 대륙붕 자료 4개 자료를 제외하고 359개의 지열류량 자료를 이용하여 한반도 남부, 즉 남한의 지열류량 분포도를 작성 분석해 본 결과(그림 1), 우리나라의 지열류량 이상대는 아산만 주변, 보령, 유성, 진안, 울진, 포항, 부산 지역과 포천, 속초, 충주, 수안보 등 지역에서 나타난다 이러한 이상대 주변에는 대개 온천이 발달되어 있었거나 새로 개발되어 있는 곳이다. 온천에 이용하고 있는 시추공의 자료는 배제하였으나 온천이응으로 직접적으로 영향을 받지 않은 시추공의 자료는 사용하였다 이러한 온천 주변 지역이라 하더라도 실제는 온천의 pumping 으로 인한 대류현상으로 주변 일대의 온도를 올려놓았기 때문에 비교적 높은 지열류량 값을 보인다. 한편 한반도 남동부 일대는 이번 추가된 자료에 의해 새로운 지열류량 분포 변화가 나타났다 강원 북부 오색온천지역 부근에서 높은 지열류량 분포를 보이며 또한 우리나라 대단층 중의 하나인 양산단층과 같은 방향으로 발달한 밀양단층, 모량단층, 동래단층 등 주변부로 NNE-SSW 방향의 지열류량 이상대가 발달한다. 이것으로 볼 때 지열류량은 지질구조와 무관하지 않음을 파악할 수 있다. 특히 이러한 단층대 주변은 지열수의 순환이 깊은 심도까지 가능하므로 이러한 대류현상으로 지표부근까지 높은 지온 전달이 되어 나타나는 것으로 판단된다.

  • PDF

Compaison of Reference Evapotranspiration Estimation Approaches (기준증발산 산정방법 비교)

  • Rim, Chang-Soo
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2008.05a
    • /
    • pp.987-991
    • /
    • 2008
  • 본 연구에서는 과거 제안된 5가지의 기준증발산식으로부터 산정된 증발산량과 pan 증발량을 이용하여 상관분석을 실시하였고 pan 계수를 산정하였다. 또한 우리나라 21개 기상관측지점에서 과거 제안된 5가지의 기준증발산식들을 비교하고 그 유사성을 알아보았다. 비교 검토된 기준증발산식은 4가지 방법으로 분류하였으며, 분류된 방법 중에서 각기 대표적인 기준증발산량 산정식을 선정하여 적용하였다. 적용된 기준증발산식은 에너지와 공기동력항의 조합법에 근거한 Penman 식, 단일근원법에 근거한 FAO Penman-Monteith(FAO P-M) 식, 복사자료를 이용한 방법인 Makkink 식과 Priestley-Taylor 식, 그리고 기온자료에 근거한 방법인 Hargreaves 식 등이다. 연구지역 선정을 위하여 기상관측지점이 있는 지역의 지리 및 지형조건을 고려하였다. 사용된 기상자료는 1970년부터 5년 간격으로 8개년의 일별 기상자료를 사용하였다. 적용결과는 수치 및 시계열 도시방법을 통하여 비교하였다. 분석결과에 의하면 대부분의 지역에서 기준증발산식과 pan 증발량과는 0.9 이상의 높은 상관관계를 보이고 있으나, pan 증발량과 비교하여 회귀식의 경사가 1.0보다 크거나 작은 경향을 보이고 있다. 전국 21개 연구지역 중에서 12개 지역에서 대기온도자료에 기초한 Hargreaves 식이 FAO P-M 식과 가장 유사한 것으로 나타났는데, 이들 지역은 대구지역을 제외하고 해안지역에 위치하고 있다. 반면에 내륙에 위치한 8개 지역에서 복사량자료에 기초한 Priestley-Taylor 식이 FAO P-M 식과 유사한 것으로 나타났다.

  • PDF

삼척시 도계읍 지역에 분포하는 풍촌층 석회석의 부존 특성

  • 이유진;손길상;박찬근;서경환
    • Proceedings of the Mineralogical Society of Korea Conference
    • /
    • 2002.10a
    • /
    • pp.17-30
    • /
    • 2002
  • 삼척-도계지역 일대에 분포하는 조선누층군의 풍촌층 석회석은 품위 및 암상에따라 상부고품위대와 하부석회암대로 분대가 가능한데, 이는 삼척-태백간을 북북동으로 흐르는 오십천을 경계로 서쪽에 분포하는 풍촌층과 비교할 때 다소간의 암상차이를 보인다. 즉, 풍촌층의 특징중에 하나인 중부백운암대가 본 역 일대에서는 백운암화가 미약하여 비교적 소폭으로 확인되며, 상부백색대 역시, 발달정도가 미약한 특징을 보인다. 시추탐사결과 확인된 삼척-도계지역의 풍촌층 상부고품위대는 일반적으로 상부백색대$(\pm15m)$ - 백운암대$(\pm5m)$ - 암회색대$(\pm50m)$로 구분되는 것으로 나타났다. 각각의 품위는 상부백색대 : CaO $53_4\~55.6\%$, 백운암대 : MgO $3.0\~18.4\%$, 암회색대 : CaO $50.4\~54.2\%$로 나타나 제철용으로의 사용이 가능하나 백운암대에 대한 선별채광이 부분적으로 요망된다. 이들 석회석은 오십천대단층의 수반단층인 수조의 NNE계열 정단층들에 의해 빈번히 단절되어 있으며 일부지역에서는 EW향의 역단층에 의해 규제되기도 한다. 상기 제단층들은 석회암층을 단절시킬 뿐만 아니라 단층각력, 단층점토, 암맥 등의 불순대를 수반하므로 개발에 장애요소가 되고 있다. 상부고품위대 부존표고는 지역에 따라 다소 차이가 있으나 200ML 내외에서 대부분 확인이 가능하며 지표노출 규모는 작은 편이나 $10^{\circ}$이하의 완경사로 화절층 하부에 부존되어 있어 갱도 채광에 적합한 형태를 이루고 있다.

  • PDF

P-Version Model of Stress Concentration Around a Circular Hole in Finite Strips (원공(圓孔)을 갖는 유한판(有限板)의 응력집중(應力集中)에 대한 P-Version 모델)

  • Woo, Kwang Sung;Lee, Chae Gyu;Yun, Young Pil
    • KSCE Journal of Civil and Environmental Engineering Research
    • /
    • v.12 no.4_1
    • /
    • pp.1-8
    • /
    • 1992
  • This paper presents a p-version finite element approach for modeling the stress distribution around a circular hole in a finite strip subjected to membrane and flexural behaviors. Also, same problem with a crack emanating from a perforated tension strip was solved by virtual crack extension method. The p-version of the finite element method based on integrals of Legendre polynomials is shown to perform very well for modeling geometries with very steep stress gradients in the vicinity of a circular cutout. Here, the transfinite mapping technique for circular boundaries was used to avoid the discretization errors. The numerical results from the proposed scheme have a good comparison with those by Nisida, Howland, Newman etc. and the conventional finite element approach.

  • PDF

Experimental study on non-linear throughflow characteristics of rockfill gabion weir (돌망태 보 통과류의 비선형적 흐름 특성에 관한 실험적연구)

  • Han, Ilyeong;Lee, Jaejoung;Kim, Gyoo bum
    • Journal of Korea Water Resources Association
    • /
    • v.53 no.10
    • /
    • pp.861-870
    • /
    • 2020
  • As the flow velocity and Reynolds number increase in rockfill porous media, the flow deviates from Darcy conditions. In this study, the permeability tests of rock column specimen and laboratory gabion weir model were carried out to investigate a head loss behaviour of flow through rockfill deposition in small river artificial recharge. Through column test, the nonlinear relationships between flow velocity and hydraulic gradient and coefficients were determined and the correlation formula of hydraulic mean radius and coefficients was proposed. The flow velocities and discharges in voids estimated by proposed equations were well matched with the measured values of laboratory gabion weir model.

The Fall Impact test for Extraction of Optimal Stacking Section of Composite Safety Barrier for Bridge (복합소재 교량용 방호울타리의 최적 적층 단면 도출을 위한 낙하 충돌시험)

  • Hong, Kab-Eui;Jeon, Shin-Youl;Kim, Kee-Seung;Kim, Seung-Eock
    • Journal of the Korean Society for Advanced Composite Structures
    • /
    • v.2 no.1
    • /
    • pp.1-7
    • /
    • 2011
  • In this study the optimal stacking section was selected by pendulum impact test for six different stacking sections of the composite safety barrier. The beam cross-section shape was determined through the poll on six different beam cross-section shapes. The six kinds of stacking design for the determined beam cross-section were suggested. CSM, DB, DBT and Roving fibers were used for stacking design. Horizontal beam and 3:1 sloped beam were modeled by using LS-DYNA. The fall impact simulation was carried out by using rectangular pendulum and cylinder pendulum. Optimal stacking section was determined by comparing and analyzing the impact simulation results.

Strain analysis of cantilever beam under eccentric force using holographic interferometry (홀로그래픽 간섭법을 이용한 편심하중에 의한 외팔보의 변형률분포 해석)

  • 박승옥;김홍석;권혁홍;조동현
    • Korean Journal of Optics and Photonics
    • /
    • v.8 no.1
    • /
    • pp.14-18
    • /
    • 1997
  • Using holographic interferometry, strain distributions for a cantilever beam subjected to the eccentric force can be analysed. Holographic fringe pattern shows inclined straight lines for the composite deformation of bending and torsion. Using these inclinations of the fringe pattern, 3rd order polynomial of plane displacements can be determined without difficulty. As the result, both of axial and shear strain distribution can be obtained from the second partial derivatives of this polynomial. These results agree well with FEM.

  • PDF

A Global Optimization Method of Radial Basis Function Networks for Function Approximation (함수 근사화를 위한 방사 기저함수 네트워크의 전역 최적화 기법)

  • Lee, Jong-Seok;Park, Cheol-Hoon
    • The KIPS Transactions:PartB
    • /
    • v.14B no.5
    • /
    • pp.377-382
    • /
    • 2007
  • This paper proposes a training algorithm for global optimization of the parameters of radial basis function networks. Since conventional training algorithms usually perform only local optimization, the performance of the network is limited and the final network significantly depends on the initial network parameters. The proposed hybrid simulated annealing algorithm performs global optimization of the network parameters by combining global search capability of simulated annealing and local optimization capability of gradient-based algorithms. Via experiments for function approximation problems, we demonstrate that the proposed algorithm can find networks showing better training and test performance and reduce effects of the initial network parameters on the final results.

The Analysis of Relationship between Forest Fire Distribution and Topographic, Geographic, and Climatic Factors (산불 발생 분포와 지형, 지리, 기상 인자간의 관계 분석)

  • Kwak, Han-Bin;Lee, Woo-Kyun;Lee, Si-Young;Won, Myoung-Soo;Lee, Myoung-Bo;Koo, Kyo-Sang
    • Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
    • /
    • 2008.06a
    • /
    • pp.465-470
    • /
    • 2008
  • 우리나라는 산림은 단순림이 많고 밀도가 높기 때문에 산불이 한번 발생하면 대형 산불로 확산될 우려가 크다. 이 때문에 산불 발생을 미리 예측하여 대응할 필요가 있다. 산불 발생예측을 위해서는 산불 발생에 영향을 미치는 인자와 산불 발생의 관계를 파악하는 것이 중요하다. 본 연구는 1997년부터 2006년까지 발생한 전국에서 발생한 산불의 point data를 이용하였다. 산불 발생 지점의 지형인자와 지리인자, 그리고 산불 발생 당시의 기상인자로 DB를 구축하고 산불 발생과의 관계를 구명하였다. 지형인자 분석은 고도, 방위, 경사에 따른 산불 발생 빈도를 분석하였고, 그 상관관계를 분석하였다. 지리인자 분석에서는 인구밀도, 산불 발생지역의 접근성(도로에 따른 접근성, 대도시와의 거리에 따른 접근성)에 대한 산불 발생의 상관관계를 분석하였다. 기상인자와 산불 발생의 관계는 전국 76개소에서 관측된 온습도 데이터를 보간한 자료와 산불 발생과의 관계를 분석하였다. 기상인자 분석은 산불이 가장 빈번하게 발생하는 3월 하순, 4월 초순, 4월 중순 자료를 평균하여 산불 발생 빈도와의 상관관계를 분석하고 산불 발생 위험지역을 도출하였다. 본 연구를 통해서 각 인자와 산불 발생의 관계를 분석해보았다. 하지만 각 인자간의 관계를 분석하지 못한 것이 한계점이라고 할 수 있다. 차후 연구에서는 각 인자간의 관련성을 분석하고 산불 발생의 원인과 인자간의 구체적인 인과관계를 밝히는 것도 필요할 것으로 보인다.

  • PDF