• Journal of the Korean Society of Propulsion Engineers
• /
• v.15 no.1
• /
• pp.76-82
• /
• 2011

The thrust axis alignment of the launch vehicle is very important because the misalignment causes the unstable attitude control and results in mission failure. Generally, optical methods such as digital theodolite and laser tracker and mechanical method such as turn table method are used to align the thrust axis. This article deals with the simple method using inclinometer based on the gravitational direction. The inclinometer indicates zero degree when that is located on the perpendicular plate to gravitational direction. This method needs two inclinometer, such as standard and alignment ones and uses the angle difference as the reference data to adjust the TVC actuator offset.

• Journal of Korea Water Resources Association
• /
• v.41 no.8
• /
• pp.773-784
• /
• 2008

The present study was carried out to examine flow properties in linear drainage channels such as road surface drainage facilities. The finite difference formulation for the varied flow analysis was solved for flow profiles in the channels. Starting the first step at the control section, the Newton-Raphson method was applied for producing numerical solutions of the equation. We considered two types of linear drainage channels, a channel with one outlet at downstream end and a channel with two outlets at both ends. Moreover, the flow analysis for various channel slopes was performed. However, we considered channels with the two outlets of slopes satisfying the condition that the both ends are the control section. The maximum of those slopes was decided from the relation between the channel slope and the location of control section. The flow of a channel with one outlet was calculated upward and downward from the control section existing in channel or upward from the control section at downstream end. The flow of a channel with two outlets at both ends were calculated for upstream and downstream channel segments divided by the water dividend, respectively and the flow analysis was completed when the water depth at the water dividend calculated from upstream end was equal to that calculated from downstream end. If the slope was larger than the critical slope, the channel with two outlets was likely to behave like the channel with one outlet. The maximum water depth was investigated and compared with that calculated additionally from the uniform flow analysis. The uniform flow analysis was likely to lead a excessive design of a drainage channel with mild slope.

• Korean Journal of Soil Science and Fertilizer
• /
• v.26 no.3
• /
• pp.143-150
• /
• 1993

To gain the basic informations on soil management practices by determination of the differences of soil genetic characteristics and the contents of soil moisture due to slope aspects of hilly land, this study was conducted at 1992 on sweet persimmon orchard soils derived from porphyry in southern of Korea. The results obtained were summarized as follows. The soils studied were belong to fine loamy family. The degree of soil development was greater in the north than other slope aspects and the solum thickness also the same. The soil chemical properties such as pH and exchangeable cations except for potassium were low generally in the orchards studied but the content of organic matter was lack in the summit and south aspect. The contents of Fe oxide and extractable Al were higher in the subsurface than surface. Fe, Al and clay indexes which indicate relative intensity of B horizon development were higher in the side slope than summit and the highest in the north slope. The rate of solum to B horizon was higher as about 1.5 for summit and west aspect which had thiner B horizon thickness compared to other aspect. North and west aspect had certainly more amount of soil water at drought season than other slope aspects and was lower the difference of soil water between the drought and wet seasons. Therfore, the soil management such as erosion control and irrigation at drought season should be practices differently due to slope aspect and soil chararteristics in the sloped land.

• Tunnel and Underground Space
• /
• v.25 no.1
• /
• pp.97-106
• /
• 2015

We must precisely investigate the mechanical characters of rock to design rock slope safely and efficiently. But the method of clinometer has some disadvantages. So, we need a new measurement that can replace the method of clinometer. In this study, we analyze the reliability of joint orientation measurements in rock slope using the 3D laser scanner and program Split-FX that is a point cloud data analysis software. We could acquire the 495 pieces joint data through the automatic extraction of features. And we confirmed that there were some errors occurred with ${\pm}4^{\circ}$ of dip and ${\pm}5^{\circ}$ of dip direction. Generally, the method of clinometer has ${\pm}5^{\circ}$ and ${\pm}10^{\circ}$ error ranges of the joint orientation(dip/dip direction) that are the results of the advance research. Therefore, we analyzed the method of 3D laser scanner, and it is found to be efficient, reliable. This method is expected to mend the disadvantages of Clinometer method.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.4
• /
• pp.2428-2435
• /
• 2014

Numerical analysis with ALE (Arbitrary Lagrangian Eulerian) Adaptive Meshing technique was performed to evaluate the pullout capacity of the embedded suction anchors (ESA) in uniform clay. The numerical method was verified by the previous study, analytical results based on limit-equilibrium theory and centrifuge tests. The pullout capacity of the ESA under horizontal, vertical, and inclined loading were evaluated, and the effect of initial rotation of the ESA on pullout capacity was also investigated. The analysis results showed that the maximum horizontal capacity was obtained at the mid-point, and the each vertical capacity gave the similar value regardless of the loading points. Furthermore, the inclined capacity was decreased as the load inclination angle increased at the mid-point of the anchor, and almost the same pullout capacity was obtained when the initial rotation angles were below 30 degrees.

• Journal of the Korean earth science society
• /
• v.38 no.4
• /
• pp.263-268
• /
• 2017

The determination algorithm of the location of a line source with strike and dip using the gravity gradient tensor on a single profile is proposed. We already proposed the determination of strike and dip in the previous paper and then, now we improved the algorithm to locate a line source after determining strike and dip. The strike and dip of the line source can be determined by rotating the gravity gradient tensor matrix as reducing 2 independent components. Using the ratio of remaining 2 components, the location can be determined by the least square manner of the pointing vectors on each observation point. A synthetic model is tested for proving the usefulness of the proposed algorithm.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.11 no.2
• /
• pp.35-41
• /
• 1993

The height differences in Mean Sea Level is an important factor in geodetic leveling net, because MSL is the reference datum for height. Geodesists and Oceanographers agree on the height differences in MSL in the east-west direction, but they disagree almost always on the north-south slope, each suspecting systematic errors in the leveling methods of the others. A promising method for determining this slope is comparison of MSL at the tidal station connected by geodetic leveling. The slopes of the sea surface along the coast of Korean Peninsular is estimated from conventional local MSL at the tidal station and bench mark height of first order leveling net in Korea. As a reference level surface, MSL at Inchon is chosen. The results indicate that sea level rises along coast of Korean Peninsular from south to north about 5.5 cm/latitude. In the east-west direction, sea level along East Sea coast stands about 5 cm higher than that along Yellow Sea coast. These are not invariable but provisional phenomena. It may become certain provided that the exact MSL is estimated.

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2012.04a
• /
• pp.206-209
• /
• 2012

산불에 영향을 미치는 인자는 일반적으로 산림 연료와 기상 그리고 지형인자로 구분할 수 있다. 이중 지형인자는 경사와 사면의 방향 그리고 해발고, 사면의 길이 등 여러 조건들이 복합적으로 이루어진 산의 형세를 이룬다. 지형 조건 중 경사는 산불 발생 후 확산속도에 영향을 주며 사면의 방향은 태양복사에너지 일사량에 따른 연료의 건조와 연료의 온도 등에 영향을 줌으로써 산불의 발생과 확산에 영향을 준다. 특히 산불이 시작되는 이른 봄철에는 강설 후 사면향에 따라 적설지역과 눈이 녹아 건조한 지역이 사면의 향에 따라 큰 차이를 나타내고 있으며 이로 인해 산불위험 예보시에도 사면향에 따른 산불발생위험을 달리 적용해야 할 필요성이 있다. 이에 본 연구에서는 사면의 방향에 따른 산불위험성을 평가하기 위해 먼저 태양복사에너지의 일사량 분석을 실시하였고 산불사례조사를 통해 사면의 방향에 따라 산불발생 위험과 피해면적을 비교, 분석하였다. 그 결과 태양복사에너지 일사량이 가장 많은 사면의 향인 남사면을 중심으로 산불발생이 높은 것으로 분석되었다.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 1999.10a
• /
• pp.30-30
• /
• 1999

추진기관의 연소실과 같이 큰 열부하를 받는 경우 막냉각은 연소실을 보호하기 위해서 사용되는 대표적인 냉각기법이다. 막냉각의 성능을 극대화하기 위해서는 냉각유체를 2차원 슬롯을 통해서 분사시키는 것이 가장 효율적이지만 여러 가지 이유 때문에 실제 적용에 있어서는 슬롯입구 부근에 작은 구멍을 만들어 이로부터 분사되는 유체를 통해서 냉각시키게 된다. 본 연구에서는 주어진 덕트에서 분사율, 분사방법, 슬롯의 형상에 따른 슬롯 출구에서의 유동장 및 온도장 측정과 함께 물질전달 방법을 이용하여 슬롯 립(slot lip) 내벽에서 자세한 국소 열/물질전달계수를 구하였다. 분사율 0.5와 1.0에 대해서 주유동과 같은 방향으로 분사시켜줄 경우와, 유동을 제한시켜 주고 이차유동의 방향을 각각 주유동과 같은 방향과 반대방향으로 분사시키는 방법에 대하여 실험하였으며, 슬롯 입구에 경사슬롯을 설치하여 냉각유체를 분사시키는 방법에 대해서 실험하였다.

• Proceedings of the Korea Multimedia Society Conference
• /
• 2002.05d
• /
• pp.574-578
• /
• 2002

층 단위로 가공하는 RP(Rapid Prototype) 시스템에서 가공되는 물체의 표면에서는 계단형의 윤곽이 나타난다. 이러한 문제점을 보완하기 위해 경사절단 방법으로 3D 모델을 가공하여 기존의 가공방법에 의해 발생하는 계단형 윤곽 모습과 표면 왜곡 둥의 문제를 보완할 수 있다. 최적의 경사선분의 집합을 구하기 위해 경사절단 선분의 길이와 중간층 점의 거리를 정의하여 이를 최소화하는 에너지 함수를 구현한다. 그러나 이 방법은 경사절단 선분이 에너지가 작아지는 방향으로만 움직이기 때문에 레이어의 윤곽이 복잡한 경우 최적의 위치가 아닌 다른 위치에서 더 이상 움직이지 않는 국부적 최적해(Local Minima)가 발생할 수 있다. 본 논문에서는 국부적 최적해를 벗어나기 위해 경사절단 선분 추출 알고리즘에 시뮬레이티드 어니얼링(Simulated Annealing) 방법을 적용하였다. 제안된 방법으로 테스트한 결과 복잡한 레이어 윤곽에서 생길 수 있는 국부적 최적해가 어느 정도 해결되었다.