• Water for future
• /
• v.24 no.1
• /
• pp.99-107
• /
• 1991

This study is for simulating to the model which analyzes flow characteristics and transverse bed slopes in a coarse-streambed of the meandering alluvial channels. Using the equations for conservation of mass, momentum, and for lateral stability of the streambed, a linear differential equation of transverse bed slope is derived from the flow characteristics in curved channels. Its solutions are solved by the Sine-generated curve method(SCM) and compared with results of field measurements. Lag distances by the maximum transverse bed slope and velocity profiles will predict risk sections of concave bank under floods.

• Journal of the Korean Magnetics Society
• /
• v.2 no.2
• /
• pp.132-139
• /
• 1992

We have designed a magnetic field gradient useful for cylindrical imaging in NMR-CT. The direc¬tion of the designed field is parallel to the axis and the gradient in the radial direction of cylindrical coordinate is monotonically increasing. The ratio of the gradient in the radial and axial direction is greater than 10 near the center of coordinate. This ratio depends on solenoid length, the number of reverse current turns at center, and the amount of the reverse current. We built a gradient coil based on the numerical simulation and tested the field generated by NMR-CT. The resulting image matches with the theoretical expectation within 10% error. Since the data acquisition time of 1-D imaging is significantly shorter than 2-D imaging, it becomes possible to image much more dynamic objects by the use of this gradient field.

• Computational Structural Engineering
• /
• v.10 no.4
• /
• pp.22-29
• /
• 1997

본 기사에서는 경사케이블의 자중의 현 방향성분을 고려하여 케이블의 동적 강성 행렬을 유도하였다. 이 동적 강성 행렬로부터 부재 자체의 동적특성을 자세히 파악할 수 있을 뿐만 아니라 다른 구조물과 결합되었을 경우 동해석에 소요되는 시간을 대폭적으로 줄일 수 있고 거동을 예측할 수 있다는 장점이 있다. 유도된 동적 강성값을 다른 연구결과와 비교해본 결과, 실 구조물의 부재롤 사용되는 경사 케이블은 중량이 비교적 크기 때문에 현 방향 자중성분을 무시할 수 없으며 항상 복합 모드 현상을 보인다는 것을 알았다. 또한 이러한 복합 모드형성으로 인해 경사 케이블의 동적 강성값은 기존의 동적 강성값보다 좀 더 큰 값을 보인다.

• Journal of Convergence for Information Technology
• /
• v.7 no.4
• /
• pp.97-103
• /
• 2017

The purpose of this study was to investigate muscle activity of cervical erector spinae & upper trapezius while using a smartphone according to anterior pelvic tilt & posterior pelvic tilt in sitting position. & we also want to obtain basic data necessary for development of IoT devices. Fifteen healthy men & women aged 20-30 were enolled, After anterior pelvic tilt & posterior pelvic tilt in sitting position were adjusted, they used a smartphone for 5 minutes & EMG signal was measured simultaneously. We used median 3 minutes of measured EMG signal. The results of this study were as follows: In the sitting position, the use of smartphone in anterior pelvic tilt had significantly lower %RVC values in both cervical erector spinae (p <.001), left upper trapezius (p <.001) & right upper trapezius (p <.002) in comparison with posterior pelvic tilt. This means that anterior pelvic tilt make vertebrae maintain normal curvature & prevent forward head posture occurred while using a smartphone. It reduces loads around neck & shoulders, so that %RVC value is significantly lowered. In the future, new posture corrected IoT devices with an aspect of pelvic tilt should be developed.

• Tunnel and Underground Space
• /
• v.29 no.5
• /
• pp.332-345
• /
• 2019

Maximum dip vector of individual joint plane, which can be uniquely defined on the hemispherical projection plane, has been established by considering its dip and dip direction. A new stereographic projection method for the rock slope analysis which employs the maximum dip vector can intuitively predict the failure modes of rock slope. Since the maximum dip vector is uniquely projected on the maximum dip point of the great circle, the sliding direction of discontinuity plane can be recognized directly. By utilizing the maximum dip vector of discontinuity both the plane sliding and toppling directions of corresponding blocks can be discerned intuitively. Especially, by allocating the area of high dip maximum dip vector which can form the flanks of sliding block the potentiality for the formation of virtual sliding block has been estimated. Also, the potentiality of forming the triangular-sectioned sliding block has been determined by considering the dip angle of joint plane the dip direction of which is nearly opposite to that of the slope face. Safety factors of the different-shaped blocks of triangular section has been estimated and compared to the safety factor of the most hazardous block of rectangular section. For the wedge analysis the direction of crossline of two intersecting joint planes, which has same attribute of the maximum dip vector, is used so that wedge failures zone can be superimposed on the stereographic projection surface in which plane and toppling failure areas are already lineated. In addition the maximum dip vector zone of wedge top face has been delineated to extract the wedge top face-forming joint planes the orientation of which provides the vital information for the analysis of mechanical behavior of wedge block.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.12
• /
• pp.1521-1528
• /
• 2012

The present paper provides the elastic stress intensity factors (SIFs) and the crack opening displacements (CODs) of a thick-walled pipe with a slanted axial through-wall crack. For estimating these elastic fracture mechanics parameters, systematic three-dimensional elastic finite element (FE) analyses were performed by considering geometric variables, i.e., thickness of pipe, reference crack length, and crack length ratio, affecting the SIFs and CODs. As for loading condition, the internal pressure was considered. Based on the FE results, the SIFs and CODs of slanted axial through-wall cracks in a thickwalled pipe along the crack front and the wall thickness were calculated. In particular, to calculate the SIFs of a thick-walled pipe with a slanted axial through-wall crack from those of a thick-walled pipe with an idealized axial through-wall crack, a slant correction factor representing the effect of the slant crack on the SIFs was proposed.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.14 no.6
• /
• pp.1395-1404
• /
• 1994

Transverse bed slope in bend is a subject of scientific investigation since it provides the necessary information for channel design and protection of hydraulic structures (bank, bridge, etc), and study of river morphology. In this paper, selected models were examined and compared for the value of prediction of the transverse bed slope in curved alluvial channels(project area), by using field data, and fitting model was proposed. All models that related the local transverse bed slope to mean flow characteristics were alike in the sense that they predicted the local transverse bed slope to be proportional to the ratio between depth and radius of curvature. The difference among the models was related with the factor of proportionality, K. Also, measured transverse bed slope was correlated to mean velocity, maximum depth, and density Froude number in channel bend. In this paper selected models were compared for the prediction of the transverse bed slope using Odgaard's experiment (obtained in Sacramento River bend), so Odgaard89 model was closely related with real transverse bed slope.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.267-267
• /
• 2022

댐 운영에 있어서 필요한 수문자료는 강수량, 수위, 유량, 저수량 자료 등이 있다. 이중 저수량은 주로 댐수위-저수용량 곡선식을 이용하여 계산한다. 댐수위-저수용량 곡선식은 댐 부근에서 계측 되는 한 개의 수위자료를 이용하여 저수용량을 산정하며, 이는 큰 저수지 면적과 저수지 수면이 일정하지 않다는 것을 고려할 때 큰 오차가 발생할 수 있다. 본 연구에서는 음향 도플러 유속계 ADCP(Acoustic Doppler Current Profiler) 이용하여 보성강댐 저수지 수면경사를 실측하고, 동시에 실시간 이동측위시스템인 RTK-GPS(Real Time Kinematic)를 이용하여 이를 검증하였다. ADCP는 유수의 흐름을 방해하지 않으면서 수중에 발사된 음파의 도플러 효과를 이용하여 유속, 유량 및 측량이 가능한 장비이며, RTK-GPS의 경우 정밀한 위치정보를 가지고 있는 기준국의 위상에 대한 보정치를 실시간으로 이용하여 오차가 ±0.03m 이하인 것으로 알려졌다. 보성강댐의 하류에서 ADCP와 RTK-GPS를 장착한 보트를 저수지 종방향으로 처음부터 끝까지 이동하여 약 7.5km 종단측량을 실시하였고 저수지 지형적 특성을 고려하여 약 700m마다 횡단측량을 실시하여 종방향뿐만 아니라 횡방향 수면차도 조사하였다. 그 결과 보성강댐의 상류로 갈수록 수면경사가 전체적으로 상승하는 경향을 보였지만 일부구간에서 수위가 하강하는 경우도 발생하였다. 이는 미약하지만 저수지 내에 흐름이 발생하고 이 흐름에 따른 통제가 변화되는 것과 중간에 유입되는 지류의 영향 등으로 구간별로 수면경사 차이가 발생하는 것으로 추정된다. 횡방향 수면차는 지류가 유입되는 일부구간에서 다소 차이를 보였지만 큰 영향을 없는 것으로 판단된다. 보성강댐 저수지 수면을 종방향 및 횡방향으로 실측한 결과 구간별로 차이를 보였으며 최대 EL. 126.60m, 최소 EL. 126.33m 나타났다. 댐 상류 부근의 수면높이 EL. 126.50m와 비교하면 +0.10m, -0.17m 차이를 보였으며 이는 저수량 산정에 큰 오차를 발생시킨다. 효과적인 댐 운영을 위해서는 유입량 및 유출량을 정확하게 산정하는 것도 필요하지만 저수량을 정확하게 파악하는 것 역시 필요하다. 저수량을 정확하게 산정하려면 수킬로미터가 넘는 저수지 크기를 고려하여 수면경사를 실시간으로 계측하는 등의 노력이 필요한 것으로 판단된다.

• Proceedings of the KSMRM Conference
• /
• 2003.10a
• /
• pp.49-53
• /
• 2003

확산텐서영상(Diffusion Tensor Imaging)의 개념은 1980년대 중반 확산강조영상(Diffusion Weighted Imaging)의 개념이 도입되면서 거의 동시에 도입되었지만 MR 장비의 기계적 한계등으로 인해 최근에야 임상적으로 사용되기 시작했다. 확산텐서영상(DTI)과 확산강조영상(DWI)의 방법론적인 차이점은 단순히 확산강조영상의 경우 세 개의 다른방향 (X-, Y-, Z-축)으로 확산측정용 경사자장을 가하는 반면 확산텐서영상의 경우 이보다 많은 방향 (최소한 6 방향)으로 확산측정용 경사자장을 가한다는 점이다. 이러한 차이로부터 금방 알 수 있는 점은 확산강조영상은 확산텐서영상의 일부라는 점이다. 즉, 확산텐서영상의 경우 더 많은 방향으로 확산측정용 경사자장을 가했으므로 더 많은 정보를 획득할 수 있고 이중 세 개의 방향 (주로 X,Y,Z)에 대한 정보만을 이용하게 되면 확산강조영상이다. 이러한 이유로 확산텐서영상을 획득하면 확산강조영상에서 얻게 되는 방향별 확산강조영상, 등방성(isotropic) 확산강조영상, ADC (Apparent Diffusion Coefficient) map등도 기본적으로 얻게 되므로 추가로 확산강조영상을 획득할 필요가 없다. 본 강의에서는 이러한 확산(텐서)영상의 물리적 원리를 복잡한 수학적 설명보다는 개념 위주로 설명해 보고자 한다.

• Economic and Environmental Geology
• /
• v.47 no.2
• /
• pp.121-131
• /
• 2014

The stability of rock slope is mainly controlled by the orientation and shear strength of discontinuties in rock mass. Therefore, in kinematic analysis, the orientation of the combination of discontinuities and slope face is examined to determine if certain modes of failure can be occurred. In previous kinematic analysis, a representative orientation of the slope face and mean orientation of discontinuity set were used as input parameters. However, since the orientations of slope face varies according to locations of measurement, the representative slope face orientation could cause misunderstanding for kinematic instability. In addition, since the orientations of each discontinuity are scattered in the same discontinuity set, there is the possibility that uncertainties are involved in the procedure of kinematic analysis. Therefore, in this study, the detailed digital topographic map was used to obtain the orientation of slope face. In addition, the probabilistic analysis approach was utilized to deal properly with the uncertainties in discontinuity orientation. The proposed approach was applied to steep slopes in mountain road located in Baehuryeong, Chunncheon city, Gangwon-Do. The analysis results obtained from the deterministic and probabilistic analysis were compared to check the feasibility of proposed the analysis.