• Journal of dental hygiene science
• /
• v.12 no.6
• /
• pp.566-571
• /
• 2012

Marginal and internal fit are very important factor for the clinical long-term success of fixed dental prostheses (FDPs). A variety of methods have been applied to the measuring marginal and internal fit of FDPs. The purpose of this study was to compare the marginal and internal fit of 2 different measuring methods silicone replica technique [SRT] and die cutting technique (DCT). SRT, the space between die and FDPs were filled with light-body silicone, then stabilized by medium-body silicone. DCT, the FDPs were cemented on definitive dies and embedded into epoxy. The silicone replicas and epoxies were sectioned mesio-distal and measured 4 locations (margin, rounded chamfer, axial, occlusal) and using a digital microscope at a magnification $\times$160. For the SRT the mean${\pm}$SDs fit (${\mu}m$) recorded were: margin $88.7{\pm}22.2$, rounded chamfer $90.6{\pm}25.0$, axial wall $61.5{\pm}21.8$, occlusal $134.9{\pm}30.8$. For the DCT the mean${\pm}$SDs fit (${\mu}m$) recorded were: margin $85.3{\pm}18.0$, rounded chamfer $85.4{\pm}24.7$, axial wall $62.0{\pm}21.3$, occlusal $131.7{\pm}30.5$. The mean${\pm}$SDs size (${\mu}m$) of SRT margin was $88.7{\pm}22.2$ and of DCT margin was $85.3{\pm}18.0$. There were no statistically significant difference (p<0.05) of the four parts between SRT and DCT. It is considered an appropriate case to use SRT at fit of FDPs.

• Journal of Yeungnam Medical Science
• /
• v.18 no.1
• /
• pp.112-122
• /
• 2001

Background: Cleft lip and palate deformity have unknown patterns of maxillofacial growth and development. The maxillofacial growth can be affected either by congenital or environmental factors such as infection and trauma. Surgical repair of cleft lip and palate may interfere the subsequent growth and development of maxillofacial region. The purpose of this study is to evaluate the characteristics of maxillofacial growth patterns in adult cleft lip and palate patients. Materials and Methods: The material for this study consisted of 17 adult male patients with cleft lip and palate. Cephalometric tracing and measurements were done by one investigator. The relationship between 17 cleft lip and palate patients and Korean norms were evaluated statistically. Results: There were statistically differences in Na. perpendicular to point A, SNA angle, effective maxillary length, maxillofacial differencial. Wit's appraisal and upper incisor to point A(p < 0.01). Pogonion to Na. perpendicular also statistically differed(p < 0.05). Other measurements didn't statistically differ. Conclusion: It was evident that in adult cleft lip and palate patients, maxilla was retruded and short. Careful cleft lip and palate repair and treatment are recommended for facilitating normal growth of maxilla.

• FLOWER RESEARCH JOURNAL
• /
• v.18 no.2
• /
• pp.110-116
• /
• 2010

This text was analyzed and investigated the vegetation and floristic composition by ordination and classification of phytosociological method, to evaluate the species composition and community structure of Cymbidium goeringii group in Korean islets. In habitat of 33 plots, the mean altitude was 65.9m, the direction was the southeast slope, the mean slope was 7.9%. The coverage of Cymbidium goeringii was 4.5%. The appearing plants with the Cymbidium goeringii was the total 102 taxa, and it was the kind of trees 68 taxa (66.7%), herbs 34 taxa (33.3%), evergreen plants 36 taxa (35.3%) and deciduous plants 66 taxa (64.7 %) respectively. The frequency of appearing plant was the highest in the Eurya japonica (48.5%), followed by Pinus thunbergii (45.5%), Smilax china (36.4%), Carex lanceolata (33.3%), Hedera rhombea (33.3%), Machilus thunbergii (30.0%), Styrax japonicus (30.3%) and Pinus densiflora (27.3%), respectively. The vegetation of tree layer in Cymbidium goeringii group was classified into Pinus thunbergii community, Pinus densiflora community, Castanopsis sieboldii community and Quercus variabilis community. Pinus densiflora community showed a strong combination with Cymbidium goeringii group in Korean islets. Pinus thunbergii community among communities was combined with Castanopsis sieboldii community, and Pinus densiflora community and Quercus variabilis community were combined.

• Journal of agriculture & life science
• /
• v.45 no.6
• /
• pp.81-88
• /
• 2011

This study was carried out to provide basic information for standard cultivation guideline of Korean mountain cultivated ginseng (Panax ginseng). Environmental conditions, soil properties, growth process, cultivation methods and sowing timing were investigated in cultivations of Korean mountain cultivated ginseng in Korea (18 region in 9 province). Most of Korean mountain cultivated ginseng was cultivated to north, north-east, east or north-west direction in broad-leaved forest, IV age group, and 500~1,000 trees/ha. Elevation was below 500 m and slope was below $25^{\circ}$ in cultivation. There were significant differences in soil properties by region and cultivation based on organic matter (3.43~24.07%) and pH level (3.8~5.7). Sprouting, leaf unfolding, flowering, fruiting, red ripening, fruit drop and leaf drop of Korean mountain cultivated ginseng was investigated in cultivation. The results show that it took 98 days on average for the whole growth process. There were two methods, sowing and transplant for cultivation. Sowing methods were classified in sowing after opening-testa treatment and direct sowing. and it was 70% and 30%, respectively.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.4
• /
• pp.25-34
• /
• 2019

Recently, when a fault occurs at a long-distance point in a LVDC (low voltage direct current) distribution feeder in a light rail system, the magnitude of the current can decrease to less than that of the load current of a light rail system. Therefore, proper protection coordination method to distinguish a fault current from a load current is required. To overcome these problems, this paper proposes an optimal algorithm of protection devices for a LVDC distribution feeder in a light rail system. In other words, based on the characteristics of the fault current for ground resistance and fault location, this paper proposes an optimal operation algorithm of a selective relay to properly identify the fault current compared to the load current in a light rail system. In addition, this paper modelled the distribution system including AC/DC converter using a PSCAD/EMTDC S/W and from the simulation results for a real light rail system, the proposed algorithm was found to be a useful and practical tool to correctly identify the fault current and load current.

• Journal of Korean Society of Forest Science
• /
• v.107 no.4
• /
• pp.393-401
• /
• 2018

The aim of this study was to analyze the characteristics of ground subsidence and land-creeping in four mining areas in Korea. Land creeping were occurred by large-scale sinkholes and tensile cracks in the mining areas. This ares showed the shape as large-scale landslides by the collapsed stone debris pushed in the direction of gravity. The rock type in the No. 4 survey area was sandstone and shale, whereas that of other three areas was limestone. The limestone was generally vulnerable to land creeping. The ground subsidence and land creeping in four mining areas were located near the ridge of the mountain. The land creeping by ground subsidence in the mining areas showed complex shapes due to the cavity of underground tunnel and the colluvial debris by gravity in the mountain area, whereas the land creeping in Korea are in the shape of landslide. The average slope of the mining area was ranged from $30.4^{\circ}$ to $33.7^{\circ}$. The values were higher ($1.5^{\circ}{\sim}4.8^{\circ}$) than the average slopes for landslide areas.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.9
• /
• pp.382-389
• /
• 2019

A novel folding process is proposed using a repeated cold-die forging and annealing to form a sterling silver ring. Sterling silver plate was cut into a doughnut shape, and lattices with 0.43-mm line-width were imprinted on it. The sample was folded by forging using dies with slopes of $45^{\circ}$, $60^{\circ}$, and $75^{\circ}$ and annealing. For comparison, samples were also fabricated without annealing. Strain was identified by measuring the length of lattices. Vernier calipers, a Vickers hardness tester, an optical microscope, and a UV-VIS colorimeter were used to determine the size, hardness, microstructure, and body color. Without annealing, cracks occurred. However, successful deformation was possible when annealing was used. The results of macro strain measurements show that the outer diameter and width decreased, while the inner diameter and thickness increased after the final process. The maximum strain was increased 0.128 toward the parallel direction. The Vickers hardness decreased after annealing and increased after the folding process. The microstructure results showed that the grain size increased after annealing but decreased after folding. The color difference based on the Lab index was under 10 for all processes. Eventually, a doughnut-shaped silver plate was successfully deformed into a ring shape by the folding process.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.12 no.4
• /
• pp.425-433
• /
• 2019

In this paper, the RCS analysis of the 10m unmanned surface vehicles was performed, and the factors of RCS increase were analyzed. Modeling techniques by transforming a geometric shape can reduce the RCS area, which can be used to develop stealth unmanned surface vehicles. In order to reduce the RCS, the existing Top Mast part was moved 1m to the tail part, the 5 degree tilt angle was moved below 0.5 m, and additional guided walls were installed to minimize the influence on the center and surrounding corner reflecting structures. As a result of comparing and analyzing the RCS analysis value with the existing model, it can be seen that the reduced countermeasure model is -3.79 dB lower than the existing model for all elevations. In particular, it can be seen that the strong scattering phenomenon is substantially removed in the region except the sacrificial angle region. In addition, it can be seen that in the case of -5m to 2m where the guide wall is added, the reflected signal is improved up to 20 to 40 dB or more, so that it does not appear on the 2D ISAR image. RCS analysis of unmanned surface vehicles explained the process of analyzing and identifying problem location through distance profile analysis and ISAR image analysis.

• Journal of the Mineralogical Society of Korea
• /
• v.32 no.1
• /
• pp.15-39
• /
• 2019

An ultramafic complex occurs as an isolated lenticular body in the Andong area. The Andong ultramafic complex comprises ultramafic and mafic rocks, but mainly peridotites. The complex extends for several kilometer to ENE direction, adjacent to the Andong fault line. This study is for petrochemistry of the peridotites within the ultramafic complex and characteristics of asbestos occurrences. The peridotites are igneous origin, ranging from lherzolite to wehrlites and are characterized by high Fo olivine ($Fo_{0.85-0.87}$), Mg clinopyroxene ($Mg_{87.5-93.5}$), and tremolitic to tschermakitic hornblende. Geochemically, these rocks show high magnesium number (mainly Mg = 85.3-87.38) and transitional element and low alkali element contents. The peridotites host asbestos, including chrysotile, tremolite and actinolite asbestos, but dominated by amphibole asbestos. The amphibole asbestos are found along small fault face, and cleavage and fracture showing several cm to ten cm in width as slip and oblique fibers, while the chryostiles occur at cleavage and vein showing several mm-cm in width as cross and slip fibers. They are confirmed by PLM, XRD and SEM results. Overall characteristics of peridotites from the Andong ultramafic complex and occurrences of the asbestos are similar to those of worldwide orogenic related Alpine type ultramafic rocks and serpentinized ultramafic bodies in Chungnam, Korea, respectively.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.50 no.6
• /
• pp.385-391
• /
• 2022

This paper presents to develop a path planning algorithm combining gradient descent-based path planning (GBPP) and particle swarm optimization (PSO) for considering prohibited flight areas, terrain information, and characteristics of fixed-wing unmmaned aerial vehicle (UAV) in 3D space. Path can be generated fast using GBPP, but it is often happened that an unsafe path can be generated by converging to a local minimum depending on the initial path. Bio-inspired swarm intelligence algorithms, such as Genetic algorithm (GA) and PSO, can avoid the local minima problem by sampling several paths. However, if the number of optimal variable increases due to an increase in the number of UAVs and waypoints, it requires heavy computation time and efforts due to increasing the number of particles accordingly. To solve the disadvantages of the two algorithms, hierarchical path planning algorithm associated with hierarchical particle swarm optimization (HPSO) is developed by defining the initial path, which is the input of GBPP, as two variables including particles variables. Feasibility of the proposed algorithm is verified by software-in-the-loop simulation (SILS) of flight control computer (FCC) for UAVs.