• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.14 no.1
• /
• pp.161-170
• /
• 1994

Traditional methods for the extraction of the environmental factors of waters in which environmental change is severer than in the land can not examine closely the changed phenomena because of the lack of equipments, manpower, time and cost, etc. Therefore, new practical and efficient methods are required. The research for the method to manage environment of the waters with remote sensing technology was needed. This study examined the interrelations between the data by an on-the-spot survey and Landsat TM data and presented the model for extracting factors of water quality with regression analysis and experimental formula.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.16 no.5
• /
• pp.97-107
• /
• 2012

In general, solid propulsion offers cost effective, large thrust capabilities comparing to the liquid propulsion which offers high specific impulse and restart capabilities. Therefore, solid propulsion is well fitted for the first stage and boosters. Building Block Launcher(BBL) approach has been studied for the launch vehicle because of cost effectiveness, limited development time and low risk. Using of the carbon fiber epoxy resin in the solid rocket motor case is expanded, and specially high strength fibers are more attracted since its inert mass reduction.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.13 no.1
• /
• pp.1-11
• /
• 2000

In this paper, optimum design problem of R.C. continuous beam is considered and GUI system is developed for using at the practical design. Objective function lot formulation of optimum design problem is made up of the costs of concrete, reinforcing steel and formwork. Design variables are width, effective depth of the beam and steel ratio and design constraints are considered on the strength, serviceability, durability and geometrical conditions. The optimum design problem is solved by using sequential linear programming(SLP), sequential convex programming(SCP) and compared their effectiveness. Also this paper shows the application at practical design work according to the development of GUI system using visual basic.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2021.01a
• /
• pp.5-6
• /
• 2021

교통수단으로서의 항공기 이용 고객의 증가로 인해 객실 내에서 제공되는 기내 서비스는 항공사의 경쟁력을 결정하는 중요한 요소 중 하나이다. 그러나 현재와 같이 승무원이 비행 중 기내식 등의 서비스 제공을 위해 카트를 직접적으로 이동시키며 제공하는 서비스는 여러 불편한 요소로 인해 서비스의 질을 감소시킬 수 있다. 이를 위해 본 논문에서는 카메라 센서와 초음파 센서를 이용하여 기내에서 활용 가능한 서비스용 스마트 카트를 설계한다. 설계하는 스마트 카트는 승무원의 이동에 따라 대체 거리를 측정해 사용자와의 일정 거리를 유지하는 동시에 승객의 호출 신호에 따라 승객의 자리로 자동 이동하여 서비스 제공이 가능하게 하는 것을 목표로 한다. 기내 서비스용 스마트 카트는 승무원의 노동 강도 감소와 더불어 항공기 객실 서비스의 질적 향상에 기여할 뿐만 아니라 저가 항공사의 경비 절감에도 기여할 수 있다.

• Korean Security Journal
• /
• no.30
• /
• pp.139-169
• /
• 2012

The purpose of this study is to contribute to establishing the scientific policing policies through deriving the time series models that can forecast the occurrence of major crimes such as murder, robbery, burglary, rape, violence and identifying the occurrence of major crimes using the models. In order to achieve this purpose, there were performed the statistical methods such as Generation of Time Series Model(C) for identifying the forecasting models of time series, Generation of Time Series Model(C) and Sequential Chart of Time Series(N) for identifying the accuracy of the forecasting models of time series on the monthly incidence of major crimes from 2002 to 2010 using IBM PASW(SPSS) 19.0. The following is the result of the study. First, murder, robbery, rape, theft and violence crime's forecasting models of time series are Simple Season, Winters Multiplicative, ARIMA(0,1,1)(0,1,1), ARIMA(1,1,0 )(0,1,1) and Simple Season. Second, it is possible to forecast the short-term's occurrence of major crimes such as murder, robbery, burglary, rape, violence using the forecasting models of time series. Based on the result of this study, we have to suggest various forecasting models of time series continuously, and have to concern the long-term forecasting models of time series which is based on the quarterly, yearly incidence of major crimes.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.15 no.4
• /
• pp.330-336
• /
• 2012

We surveyed and evaluated quantities and distribution characteristics of debris on the sea floor around active fishing grounds around the islands in the southwest coast of Korea in 2007 where the average depth is below 40m. Proper recovery gears mainly to haul the derelict fishing gears are selected considering the sea bed types of the areas. The collected debris amounts were used to estimate the total amount of the surveyed area. The number of hauls per trial times the amount of the debris was extended to whole sampling area and the weighting factor from the opinion was applied to reach the total amount of marine debris on the floor. The amount of the deposited marine debris around Wangdeung-do area is estimated as about 686 $kg/km^2$, and the cost of the collection and treatment for the deposited marine debris is estimated about 3.9 billion KRW after consideration of the proper size of the working ships, labor, transport and treatment cost.

• Journal of the Korean Geotechnical Society
• /
• v.32 no.7
• /
• pp.35-45
• /
• 2016

Estimation of vertical bearing capacity is critical in the design of bucket foundation used to support offshore structure. Empirical formula and closed form solutions for bucket foundations in uniform sand or clay profiles have been extensively studied. However, the vertical bearing capacity of bucket foundations in alternating layers of sand overlying clay is not well defined. We performed a series of two-dimensional axisymmetric finite element analyses on bucket foundations in sand overlying clay soil, using elasto-plastic soil model. The load transfer mechanism is investigated for various conditions. Performing the parametric study for the friction angles, undrained shear strengths, thickness of sand layer, and aspect ratios of foundation, we present the predictive charts for determining the vertical bearing capacities of bucket foundations in sand overlying clay layer. In addition, after comparing with the finite element analysis results, it is found that linear interpolation between the design charts give acceptable values in these ranges of parameters.

• Water for future
• /
• v.28 no.2
• /
• pp.115-124
• /
• 1995

A GIS is capable of extracting various hydrological factors from DEM(digital elevation model). One of important tasks for hydrological analysis is the division of watershed. It can be an essential factor among various geometric characteristics of watershed. In this study, watershed itself and other geometric factors of watershed are extracted from DEM by using GIS technique. The manual process of tasks to obtain geometric characteristics of watershed is automated by using the functions of ARC/INFO software as GIS package. Scanned data was used for this study and it is converted to DEM data. Various forms of representation of spatial data are handled in main module and GRID module of ARC/INFO. GRID module is used on a stream in order to define watershed boundary, so it would be possible to obtain the watersheds. Also, a flow direction, stream networks and orders are generated. The results show that GIS can aid watershed management and research and surveillance. Also the geometric characteristics parameters of watershed can be quantified with ease using GIS technique and the hardsome process can be automated.

• Journal of Korean Foot and Ankle Society
• /
• v.13 no.2
• /
• pp.169-174
• /
• 2009

Purpose: To evaluate the clinical results between interlocking intramedullary nail with fibular fixation and nail only for treating distal tibiofibular diaphyseal fractures. Materials and Methods: From March 2003 to September 2006, 19 distal tibiofibular fractures were antegrade nailed after anatomical reduction and fixation of fibular fractures, and another 37 fractures fixed with nails only. Average age of patients was 48.6 years. These two groups were compared by VAS (visual analogue scale) & ankle ROM according to degree of comminution and fracture configuration. The statistical analysis was evaluated by t-test. Results: There was no statistical difference between fibular fixation group and non-fixation group in VAS score according to fracture comminution and configuration (p>0.05). However, compared according to fracture configuration, mean ankle eversion of fibular fixation group in oblique fractures was 18.3 degrees, and that of non-fixation group was 12.5 degrees (p<0.05). In addition, mean ankle plantar flexion, dorsiflexion, inversion and total ankle ROM of fibular fixation group in spiral fractures was 40.0, 20.0, 30.0 and 108.3 degrees of each and that of non-fixation group was 38.3, 18.5, 27.0 and 101.7 degrees (p<0.05). Conclusions: In oblique and spiral fractures of distal tibiofibular diaphysis, interlocking intramedullary nail with fibular fixation had the advantage in postoperative ankle ROM. So, it can be a worthy method for the treatment of distal tibiofibular diaphyseal fractures.

• Journal of the Korean Geotechnical Society
• /
• v.22 no.5
• /
• pp.27-37
• /
• 2006

Cemented Sand and Gravel (C.S.G) method has become increasingly popular in Japan and throughout the world as a construction method and material. This method is favorably used for cofferdam and large dam because a quarry and aggregate plant facility can be diminished. Also, this method can reduce construction cost, work duration and destruction of environment. In this paper, a methodology for C.S.G mix design based on so-called soil mechanics approach is proposed for trapezoid-shaped dam. The methodology consists of selection of a suitable aggregate, introduction of compaction method, processing to prepare standard specimens, and determination of mix portions. Also, unconfined compressive strength tests and large triaxial compression tests are performed. From the results of the test, correlation equation among strength, elastic modulus and unit cement is proposed.