• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.5
• /
• pp.838-848
• /
• 1992

The objective of the study is to provide a theoretical tools for analyzing the fracture of leyered composites with a center crack. It is assumed that the composite is composed of successive accumulation of the fiber layer and resin layer with the fiber layer being perfectly bonded to the resin layer except the region of a center crack. In-plane shear loading (Mode II) and the anti-plane shear loading (Mode III) are considered separately. Boundary value problems are formulated by using a plane theory of elasticity and governing equations are reduced to a Fredholm integral equation of a second kind. The equation is solved numerically and the stress intensity factors are obtained. The normalized Mode II and Mode III stress intensity factors are evaluated for various combinations of material properties and for various geometrical parametes.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.18 no.6
• /
• pp.37-44
• /
• 2004

This paper represents a new approach for the protective relay of power transmission lines using a Artificial Neural Network(ANN). A different fault m transmission lines need to be detected classified and located accurately and cleared as fast as possible. However, The protection range of the distance relay is always designed on the basis of fixed settings, and unfortunately these approach do not have the ability to adapt dynamically to the system operating condition. ANN is suitable for the adaptive relaying and the detection of complex faults. The backpropagation algerian based multi-layer protection is utilized for the teaming process. It allows to make control to various protection functions. As expected, the simulation result demonstrate that this approach is useful and satisfactory.

• Conservation Science in Museum
• /
• v.18
• /
• pp.65-76
• /
• 2017

Following advances in technology and with the growing need for renewable energy, fluorescent and halogen lamps are being replaced by LED lighting in museum systems. This paper researched the setting of standards for the diverse lighting systems in addition to the LED lighting that are expected to be introduced in museums in the future. Contrary to previous belief, LEDs were shown to only barely emit in the ultraviolet region, but the visible rays were confirmed to produce discoloration depending on illuminance-hours. When the color change by LED lamps at the color temperature of 2800K, or warm white, was compared with 5500K, or white, the emission spectrum analysis confirmed that the blue spike increased at a higher color temperature and caused more discoloration. This suggests that in addition to illumination, color temperature should be considered by including the emission spectrum when museums set lighting environment standards.

• Resources Recycling
• /
• v.15 no.4 s.72
• /
• pp.52-59
• /
• 2006

The purpose of this study was to evaluate the effects of ground granulated blast-furnace slag on strength development and durability of ordinary portland cement concrete (OPC) with steam curing types. Main experimental variables were slag contents(0%, 10%, 30%, 50%, 70%) and curing types (standard, accelerated curing). It were performed to check the basic properties of concretes that compressive strength, rapid chloride ion permeability and chemical resistance. From the result, we have found that increasing the amount of blast-furnace slag produced concrete with increased compressive strength and permeability resistance. Rapid freezing-thawing test showed that they were good enough to protect the concrete structures and to carry out cyclic freezing and thawing. The freeze-thaw resistance of blast-furnace slag produced concretes maintained above 90% of relative dynamic modulus after 300 freezing-thawing cycles. Increasing the amount of blast-furnace slag produced concretes with increased chemical resistance.

• Analytical Science and Technology
• /
• v.19 no.2
• /
• pp.172-180
• /
• 2006

This study was performed to establish new methods for hazardous substances and to develop an analytical method in specified wastes for preventing the environmental pollution caused by hazardous wastes. Therefore, the trends of international management, regulatory criteria, and items of hazardous wastes in various countries were investigated. Based on this study, target priority of new hazardous substances in specified wastes was established. An analytical method was developed using the waste standard reference materials of sludge, oil, bottom ash, etc., which contain the new hazardous substances (Ba, Be, Cr(VI), F, Ni, Sb, Se, and V). A total of 37 waste samples from the representative facilities, which are emitting new hazardous substances, were analyzed.

• Journal of Conservation Science
• /
• v.36 no.2
• /
• pp.123-142
• /
• 2020

We attempted an experimental study of lost-wax casting to reconstruct the Gilt-bronze pensive Bodhisattva; The main object we aimed to reconstruct was the Korean national treasure No.83, Gilt-bronze pensive Bodhisattva(Maitreya); thus, we scientifically analyzed and measured the alloy ratio and casting method. Initially, the alloy ratio we used during the preliminary experiment was Cu:Sn:Pb = 95.5:4.0:0.5; we then increased tin and lead by 2.5% to consider vaporization during the main experiment. After applying lost-wax casting, we realized that 30% rosin contributed to proper hardness after the wax hardness experiment. The microstructure revealed normal casting character(α-Cu, δ), and the results of the chemical analysis are identical to those of previous studies. The analysis of the mold suggests the presence of quartz powder for structural stability and fire-resistance along with other organic materials whose contribution is still unknown. We expect that our research will serve to provide basic data for advanced studies in the future.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.29 no.4
• /
• pp.498-508
• /
• 2002

The purpose of this study was to compare the amount of fluoride release and remineralizing effect of compomer with those of glass ionomer cement and composite resin. Composite resin($Z-100^{(R)}$) was used for negative control group(Group I), glass ionomer(Fuji II $LC^{(R)}$) for positive control group(Group IV), compomer(Dyract $AP^{(R)}$ and $F-2000^{(R)}$) for experimental group(Group II and Group III). The results obtained can be summarized as follows : 1. Glass ionomer showed the higher amount of fluoride release than compomer groups. Composite resin showed no fluoride release during test period. 2. Significant evidence of remineralization could be noticed in samples of all groups. The highest degree of remineralization was observed in glass ionomer group followed by compomer group. The least evidence of remineralization was observed in composite resin group. 3. Microhardness values of carious site was lower than control site, but Microhardness values of caries site at form away from filling materials in group II, III, IV was significantly higher than the other area. Based on the above results, compomer could be considered as one of the very attractive restorative materials in the field of pediatric dentistry.

• Journal of Applied Biological Chemistry
• /
• v.65 no.4
• /
• pp.343-348
• /
• 2022

This study was performed to establish an analytical method for the standardization of Angelicae Dahuricae Radix as a functional ingredient. We established six compounds including oxypeucedanin hydrate (1), byakangelcol (2), oxypeucedanin (3), imperatorin (4), phellopterin (5) and isoimperatorin (6) as marker compounds of Angelicae Dahuricae Radix. An analytical method using Ultra Performance Liquid Chromatography (UPLC) was established and validated for marker compounds of Angelicae Dahuricae Radix. The specificity was confirmed by the chromatogram from UPLC and the value of coefficient determination was also higher than 0.999, indicating high linearity. The relative standard deviation (RSD) and recovery of marker compounds were less than 5% and in the range of 90- 110%, respectively, which means that this method has high accuracy and precision. Therefore, this analytical method could be used as basic data for the development of functional ingredients for health functional food of Angelicae Dahuricae Radix.

• Journal of the Korean Arthroscopy Society
• /
• v.7 no.1
• /
• pp.81-86
• /
• 2003

Purpose : The clinical consequences of arthroscopic Bankart repair using suture anchor with non-absorbable suture as well as various factors, expected to have an effect on the prognosis of disease, have been evaluated and compared through preoperative and postoperative modified Rowe score. Materials and Methods : Twenty-eight cases were evaluated for the subject of this study, which enabled us to follow up at least for more than 18 months from lune, 1997 to May, 2001. Modified Rowe score was used for the evaluation of preoperative and follow-up shoulder function and stability. After setting up 9 factors expected to affect a prognosis, a statistical verification was conducted. Results : The postoperative Rowe score was 87.3, while preoperative Rowe score was 28.4 and the Rowe score was improved significantly(p=0.000). There were 1 case of redislocation and 2 cases of limitation of motion in the shoulder. In prognostic factor analysis through Rowe scoring system. Rowe score of their age at a trauma under 20 years was greater than that of above 20 years and it was significant(p=0.023). Conclusion : It was thought that arthroscopic Bankart repair using suture anchor was one or useful treatment method for recurrent shoulder dislocation patients. It was considered that their age at initial trauma was the factor to affect a prognosis.

• Analytical Science and Technology
• /
• v.27 no.5
• /
• pp.261-268
• /
• 2014

In advanced countries, a variety of consumer exposure assessment models including CONSEXPO, are developed to manage risks of consumer products containing hazardous materials. The models are used to assess the risks of exposure to hazardous chemicals in consumer products, which serves as a foundation for regulation standards. In this study, exposure assessment models applicable for various scenarios were reviewed and a proper model was applied for the selected products and risk assessment was conducted at each stage to establish a risk assessment procedure for different types of products. Based on the exposure scenario, exposure factor was selected and according to the algorithm produced based on CONSEXPO exposure model, some level of phthalates were detected from some types of PVC flooring. However, a correlation between phthalate content and migration rate showed r-square 0.0065, little correlation, which is inadequate for estimating standard value. For this reason, it seems valid that the current standard be in place. Additionally, any new standard was not suggested as VOCs were not found harmful to human health, allowing the existing standard to be continuously applied. No migration rate was found for heavy metals and risk assessment was not performed accordingly. In this aspect, it is presumed that hazards to health through dermal exposure would be very little.