• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.5
• /
• pp.47-53
• /
• 2007

The purpose of IEEE 802.16j is to extend coverage and to enhance throughput by using relay station additionally to conventional IEEE 802.16e . The cellular system experiences performance degradation at the cell edge due to pathloss, shadow and multipath fading. We can get advantage of spatial diversity gain by using relays more than two cooperatively in the IEEE 802.16j system. Cooperative relaying using space-time code provides better performance under multipath fading and has more robustness against the shadow fading than single relaying. In this paper, we investigate the performance of IEEE 802.16j using cooperative relaying by link level simulation. We also show that the cooperative relaying system achieves better performance than the conventional single relaying system. We apply realistic shadow model considering correlations between shadow fadings of different relaying paths. It is shown that the performance of the system depends highly on the spatial location of relay stations.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.9B
• /
• pp.774-782
• /
• 2003

Generally, in the Mobile IP technologies, the use of RSVP(Resource ReSerVation Protocol) is recommended in order to provide a mobile node real-time service. However, the handoff of a mobile node increases the registration delay, RSVP reservation delay and signalling overhead in the Mobile IP and RSVP interworking. Specially, the resource reservation on the path between a mobile node and a correspondent node is the duplicated reservation and then causes unnecessary creation of the signalling overhead and waste of the resource, since the majority of the path before handoff and after handoff is same. If the radius of a cell providing a wireless interface to a mobile node is small, the number of handoff will increase and also signalling overhead and duplicated resource reservation will increase. In this paper, we proposed the integration model of Cellular IP and RSVP with RSVP proxy scheme. Here, Cellular IP protocol minimizes registration delay, transfer delay, and loss by handoff in micro cell network, the RS VP proxy that minimizes the duplication of resource reservation prevents the path for RSVP session from change using the address for reservation of a mobile node. Proposed scheme was evaluated in comparison with the existing Mobile IP and RSVP interworking scheme using the probability of resource reservation fail to the radius of a cell and the handoff rate.

• Journal of Digital Convergence
• /
• v.11 no.1
• /
• pp.283-288
• /
• 2013

In this study, we introduce a 3D micro-cell simulator for radio wave propagation analysis in indoor environments. Previous studies treat only the path loss between the transmitter and receiver in 2D geometry. We provide the simulation results of indoor propagation prediction based on various ITU-R Recommendations. Simulation results described here indicate that the low and high frequency bands give quite different characteristics in presented indoor geometry. The propagation loss as a function of distance has two distinct regions. It is similar to that occurring in free space within 5-20m of the transmitter, however, increases significantly as the electromagnetic waves become obstructed by the walls at distances further away in the next region.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.9A
• /
• pp.758-766
• /
• 2011

Cooperative communications are adopted as a promising solution to achieve high data rate over large areas in the future 40 wireless system and the relay station (RS) is the key concept in cooperative communications. However, most existing works in this area focus only on optimal RS selections. In addition, there are only few works consider another crucial issue: how many relay stations we need to place. Only when the number of relay stations is defined, the relay station selection can be performed well. In this paper we derive a formula which describes the impact of varying number of RS on end-to-end link throughput assuming a clustering scheme which is based on Voronoi tessellation. In addition to mathematical analysis on the feasibility of the formula, we also examine its performance through a set of simulations under the Erceg path loss model. Simulation results verify that the link throughput gain of our proposed scheme is promising.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.42 no.9 s.339
• /
• pp.19-28
• /
• 2005

We establish a statistical model for the ultra-wide bandwidth (UMB) indoor channel based on over 2000 frequency response measurements campaign in a Practical apartment. The approach is based on the investigation of the statistical properties of the multipath profiles measured in different place with different rooms. Based on the experimental results, a characterization of the propagation channel from theoretic view point is described. Also we describe a method for measurement of the channel impulse response and channel transfer function. Using the measured data, the authors compares channel impulse responses obtained from time-domain and channel transfer functions obtained from frequency-domain with statistical path loss model. The bandwidth of the signal used in this experiment is from 10MHz to 8.01 GHz. The time-domain results such as maximum excess delay, men excess delay and ms delay spread are presented. As well as, omni-directional biconical antenna were used for transmitter and receiver In addition, measurements presented here support m channel model including the antenna characteristics.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.12B
• /
• pp.1565-1573
• /
• 2011

In this paper, we present a MIMO-OFDM broadband power line communication (BPLC) for Smart Grid and its associated applications and analyze its performance over the 3-phase 4-wire power line channels. For practical BPLC system simulation, we adopt the statistical power line fading channel model instead of the existing deterministic fading channel models (Zimmermann model, MTL model, and so on). In this paper, we implement $2{\times}2$ and $3{\times}3$ MIMO schemes using 3-phase 4-wire power lines. We investigate the capacity loss and BER performance of the proposed MIMO system by considering the effect of cross-talk between antenna paths. We choose space-frequency coding in order to reduce frequency interference between subcarriers and employ maximum ratio combining (MRC) that achieves both multiple antenna path diversity gain and multiple fading path diversity gain. We evaluate the proposed system performance through computer simulation in terms of the impulse noise index and the capacity loss ratio and compare the different signal combining schemes including MRC, equal gain combing (EGC), and selection combining (SC).

• 전자공학회논문지 IE
• /
• v.44 no.1
• /
• pp.27-32
• /
• 2007

This study was to suggest the predictive model of propagation, considering the effect by the multipath waves produced by the sending and receiving vehicles' left/right reflectors and the adjacent vehicles when the communication between the vehicles on the one-way two-lanes road in the urban city with a lot of traffic jams. Then, the radius of curved road was 600[m], the length of curved roads $52.4\sim471.2[m]$, and the bridge's pier of road was $5o\sim45o$. Also, it was simulated by changing the receiving vehicle located on the curved road's gap from minimum 3.3[m] to maximum 29.5[m], corresponding to the change of distance of the bridge's pier of road and curved road. As a result of this research above, in case of $5o\sim15o$ bridge's pier of road, it was within l[dB] regardless of the receiving vehicle's position on the curved road in case of propagation path loss. In case of $15o\sim45o$, it was approximately $1\sim8[dB]$ as the bridge's pier of road is changed. And, in case of propagation path, it found out that it was changed to $0.4\sim120[m]$ according to the change of bridge's pier of road. Then, the delay time of propagation was 400[nsec] as it produced 120[m] in the difference of propagation path.

• Journal of Advanced Navigation Technology
• /
• v.5 no.1
• /
• pp.62-73
• /
• 2001

In this paper, performance of DSRC systems is analyzed with considering the real roads and height of vehicles. The channels are modeled as 2-Ray and 4-Ray with a direct wave and reflected waves by a road and buildings in a physical layer because DSRC keeps LOS propagation characteristics, and the pass loss for each model is calculated respectively. Rician factor is obtained through the calculated path loss on two models for DSRC, and the performance of the systems is analyzed in AWGN and Rician fading channels, Impulsive noise and Rician fading channels respectively. As a result, in Rician fading channels with impulsive noise(A=0.2, ${\Gamma}^{\prime}=0.22$), BER is below $10^{-6}$ when the distance is farther than 80[m] and 40[m] in 2-Ray model and 4-Ray model respectively. For performance improvement, BCH coding scheme and MRC diversity scheme are adopted.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.9A
• /
• pp.838-849
• /
• 2005

Fast handover protocol provides seamless handover in mobile Ipv6 networks by reducing handover latency. This paper proposes FMIP-M mechanism to apply this advantage of fast handover protocol to multicast service. The FMIP-M is a fast handover mechanism that supports a reliable multicast service in mobile Ipv6 networks. When hosts move other networks, they may have seine data missing and out-of-synch problems of multicast data. The proposed mechanism provides reliable multicast transmission by compensating data losses from the previous AR. Also it provides an additional function that is able to change multicasting service types dynamically in accordance with network status related with multicasting. So that it is able to make multicast paths very close to the optimum and more efficient multicast service is possible. The performance of the proposed mechanism is evaluated by a time analysis and simulations in various conditions.

• The Journal of the Acoustical Society of Korea
• /
• v.41 no.2
• /
• pp.218-226
• /
• 2022

The main characteristics of the underwater acoustic channel have varying multipath and fast fading. Especially, Frequency Shift Keying (FSK) signals with multiple frequency bands caused loss of information bits allocated on the specific frequencies due to selective fading phenomenon. Therefore, this paper proposes frequency gain control algorithm based on preamble error rates. The proposed algorithm estimates optimal gain value in the range of preamble error rate with less than 10 % for specific faded frequency. By employing turbo equalized FSK signals with rate of 1/3, the experiment was conducted on a lake in Munkyeong city with distance of 300 m to 500 m. The result confirms that packets are decoded successfully by applying proposed algorithm as increasing number of iterations.