• Journal of the Society of Naval Architects of Korea
• /
• v.28 no.2
• /
• pp.132-145
• /
• 1991

Experimental studies are made of the characteristics of turbulent flow around the propeller shaft in Cavitation Tunnel using a 2-component LDV system. First the flow uniformity and turbulence levels at the test section are measured. The turbulent boundary layer around the propelle shaft and the wakes behind the propeller shaft are also measured. It is shown that the former represents the general turbulent boundary layer around the propeller shaft but the latter represents the complicated flows behind it.

• Journal of Korea Water Resources Association
• /
• v.35 no.6
• /
• pp.779-786
• /
• 2002

A boundary element method with a Lagrangian approach and B-spline technique is employed to investigate characteristics of solitary waves attacking on beach slopes. By comparing numerical solutions with available laboratory measurements, it is shown that the maximum run-up heights of the present model are more agreeable than those of the existing numerical model. Variations of run-up heights and velocity vectors for different slopes are also described. Characteristics of hydrodynamic pressure acting beach slopes are investigated in detail.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.13 no.2
• /
• pp.267-277
• /
• 1993

A finite element method(FEM) is presented and applied to the two-dimensional bottom turbulent boundary layer. The time-dependent incompressible motion of a viscous fluid is formulated by using the well-known Navier-Stokes equations and vorticity equation in terms of the velocity and pressure fields. The general numerical formulation is based on Galerkin method and solved by introducing the mixing length theory of Prandtl for eddy kinematic viscosity of a turbulent flow field. Numerical computations of the transport of sediment on an arbitrary sea-bed due to wave motion in the turbulent boundary layer are carried out. The results obtained by the FEM made clear the difference in characteristic features between the boundary layer due to oscillatory flow and the boundary layer due to wave motion.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.15 no.1
• /
• pp.1-8
• /
• 1990

In this paper, the transient electromagneti wave scattering at dielectric cylinder is studied by new numerical analysis method. Basic formulation of boundary integral equation (BIE) for numerical method is started weighted residual technique. BIE is made to two simultaneous equation at surface inner and outside point of dielectric cylinder in extended boundary condition (EBC) and surface boundary condition (SBC). Numerical method is used Boundary element method (BEM) that is two form, one is direct method and the other is indirect method, so that this method that transformes operator inversion martics is used numerical analysis. A good agreement of this numerical solution and the other results is obtained.

• Proceedings of the Korean Information Science Society Conference
• /
• 2005.07a
• /
• pp.598-600
• /
• 2005

본 논문은 MPEG-4 기반의 모바일 비디오 서비스 환경에서 발생하는 화질열화 현상의 하나인 블륵킹 현상을 제거하는 기법을 제안한다. 제안된 기법은 전처리 과정과 3가지 모드의 디블록킹 필터 및 후처리 과정으로 구성되어 있으며 각 모드는 블록경계의 특성에 따라 적용된다. 모드 1은 블록경계의 양쪽 모두가 평탄한 경우에 해당하며 가장 강한 필터를 적용한다. 모드 2는 블록경계의 한쪽만 평탄한 경우이고 이때는 비대칭 필터를 적용한다. 모드 3은 블록경계를 중심으로 양쪽 모두 복잡한 경우이고, 이 경우에는 블록경계의 주파수 특성을 고려하여 화소값을 보정한다. 전처리 과정에서는 각 필터의 모드를 올바르게 선택하도록 블록 내부의 불필요한 신호를 제거하고, 후처리 과정에서는 대각선 에지와 블록의 모서리가 만나는 경우 발생하는 corner outlier를 제거하여 주관적 화질을 향상시킨다. 실험결과에서 제안한 방법이 PSNR 관점에서 후처리 과정을 거치지 않는 비디오의 경우와 비교하여 약 0.7dB, MPEG-4 디블록킹 결과와 비교하여 약 0.4dB 향상됨을 보인다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.313-313
• /
• 2023

이 연구에서는 침수식생 조건에서 식생 형태 별 frontal area, solid volume fraction이 유속 분포에 미치는 영향을 분석하고, 흐름측정결과로부터 식생 형태에 따른 난류흐름특성을 분석하기 위하여 수행 되었다. 식생흐름 구현을 위하여 5 cm의 간격으로 총 257개의 모형식생을 전체 영역에 배치했다. 유속측정위치는 수위측정결과에 따라 흐름이 안정화되는 구간에서 연직방향으로 17개 지점에서 측정한 후 앙상블 평균하여 분석했다. Branch의 유무에 따라 Type I과 II로 구분하여 각 식생에 대해 유속의 연직분포를 측정한 결과, Branch가 없는 Type I에서는 유속이 지속적으로 감소하는 반면, Type 2에서는 Frontal area가 급격히 증가하는 Branch 구간에서 유속이 급격히 감소한 후 Trunk 구간에서 유속이 다시 증가하는 변화를 보였다. Velocity Spectrum 분석 결과, 모든 지점에 대해 평균한 결과 고주파수 영역에서 -5/3 law를 따르는 것으로 나타나 전체 영역에서 isotropic & homogeneous 난류흐름이 발생함을 확인했다. 난류흐름특성 계산결과, Turbulent kinetic energy(k)를 mean kinetic energy(K)로 무차원화하여 연직분포를 비교했을 때 -k/K는 모두 식생에 근접하며 증가했다. Shear production(P_s)의 계산결과로부터 전단흐름에 의한 난류운동에너지 생성영향분석결과, Type I과 II가 식생경계의 mixing interface 부근에서 급격히 증가하는 분포를 보였으며, 이는 시간평균유속분포에서 분석한 결과와 일치한다. Wake production(P_w)의 연직분포계산결과, P_s와 유사하게 식생경계 부근에서 상승하는 결과가 나타났으며, 이는 식생경계에서 발생하는 Large scale eddy로 인해 발생함을 알 수 있다. 마지막으로 x-방향 난류확산계수로부터 scale factor(α_x)의 연직분포를 계산한 결과, 식생경계부근의 mixing interface에서 증가한 후 식생영역 내에서 감소하는 분포를 나타냈다. z-방향 난류확산 계수의 scale factor(α_z)는 α_x에 비해 작게 계산되었다. 이러한 결과는 오염물질의 연직확산이 식생경계에서 증가한 후 식생 내부에서 감소하여 오염물질, 부유사 등의 축적이 이뤄질 것으로 예상된다. 이는 가지로 인해 식생저항이 증가할 경우 용존성 물질의 혼합이 감소하여 식생의 저장대 효과가 증가함을 의미한다.

• The KIPS Transactions:PartB
• /
• v.12B no.3 s.99
• /
• pp.223-232
• /
• 2005

In this paper, we propose a novel post-filtering algorithm with low computational complexity that improves the visual quality of decoded images using block boundary classification and simple adaptive filter (SAF). At first, each block boundary is classified into smooth or complex sub-region. And for smooth-smooth sub-regions, the existence of blocking artifacts is determined using blocky strength. And simple adaptive filtering is processed in each block boundary area. The proposed method processes adaptively, that is, a nonlinear 1-D 8-tap filter is applied to smooth-smooth sub-regions with blocking artifacts, and for smooth-complex or complex-smooth sub-regions, a nonlinear 1-D variant filter is applied to block boundary pixels so as to reduce the blocking and ringing artifacts. And for complex-complex sub-regions, a nonlinear 1-D 2-tap filter is only applied to adjust two block boundary pixels so as to preserve the image details. Experimental results show that the proposed algorithm produced better results than those of conventional algorithms both subjective and objective viewpoints.

• Archives of design research
• /
• v.18 no.3 s.61
• /
• pp.171-180
• /
• 2005

The purpose of this research is to investigate the nature of direction of the design corresponding to a human-centered design, digitalism, ecological design, and culture-oriented design which is an issue of design in the 21st century, from the design of the inside of a room. As a method of approach to this objective, first, 1 understand the form of boundary structure appearing in space, through the theoretical investigation of a boundary form. This research is trying to elicit the expression characteristic of kineticism which was introduced to the boundary form as a factor constituting space, by investigating the characteristic of kinaticism which was expressed in plastic arts and other genres. As a process of the proceeding of this investigation, It is explained the background, purpose, and method of this study in Chapter I, and look into the characteristic of the unfolding and expression of kinetic arts as well as the structure of a boundary form of space in Chapter II. In Chapter III, I divide the aspect of modern architectural space into realistic movement, relative movement, and associational movement and examine them. In Chapter IV, I investigate a case of modern space in which the three types of the characteristic of movement mentioned in Chapter Three was expressed, and analyze to what boundary structure the space was introduced. Last of all, in Chapter V, I elicit the characteristic of a boundary form of kineticism which was the result that appeared through the above analysis, and present the nature of future direction of interior.

• Proceedings of the Korea Contents Association Conference
• /
• 2009.05a
• /
• pp.807-809
• /
• 2009

Thin film deposition methods have been widely used and intensively investigated because high quality crystalline films enable to fabricate by sputtering. Especially rf magnetron sputtering deposition has advantages of being employ a relatively high deposition rate and also to achieve high crystalline films in low pressure because plasma density around target by magnetic is high. To apply ZnO thin film for SAW filter, it has highly flat surface, excellent c-axis preferred orientation and high resistivity value. As-deposited ZnO films showed the strong c-axis growth and excellent crystallinity. C-axis preferred orientation, resistivity and surface roughness highly depended on oxygen/argon gas ratio.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.15 no.4
• /
• pp.42-54
• /
• 2012

The main purpose of this study is to suggest the spatial statistical approach suitable for the delimitation of Busan CBD. For this purpose, Getis-Ord $G_i^*$ and both of IDW (Inverse Distance Weight) and FDB(Fixed Distance Band) were applied to delimit the CBD boundary. And then, the results of the CBD boundary were compared and verified with the methodologies of the previous studies. The result of IDW accorded with the previous study relating to the delimitation of the boundary of CBD, and the result of FDB was reflecting the characteristics of the mixed-use residential of a transition zone. As a result of the land use quotient, the mixed land use of residential and commercial was highly specialized in the boundary of FDB. These results will be able to support the understanding of urban spatial structure and the effective CBD management.