• Proceedings of the Korean Society of Medical Physics Conference
• /
• 2003.09a
• /
• pp.50-50
• /
• 2003

World Wide Web (WWW)에서 Virtual Reality Modeling Language (VRML)를 이용하는 3 차원 (3D) 디스플레이는 사용자에게 직관적인 정보를 더 효과적으로 제공해 준다. 웹을 기반으로 하는 해부학적 영상과 융합되는 기능적 영상의 3D 가시화는 아직까지 체계적인 방식으로 연구가 활발히 진행되지 않았다. 이 연구의 목적은 2D 영상들과 함께 웹에서 VRML을 이용하여 구현되는 3D 해부학적 표면 영상들과 기능적 표면 영상들을 동시적으로 관찰할 수 있게 하고 VRML을 통해 만들어진 거리 측정 도구를 가지고 관심영역의 공간적인 위치 정보를 제공하는 것이다. 본 연구에서는 한 명의 간질 환자로부터 Magnetic Resonance (MR) 축면 영상과 발작기 및 발작간기 Single Photon Emission Computed Tomo graphy (SPECT) 축면 영상들을 각각 획득하였다. 발작 진원지의 확인을 향상시키기 위해서 subtraction ictal SPECT co registered to MRI (SISCOM) 을 수행하였다. SISCOM 결과로 나타난 각 2D 영상들은 모든 voxel 들의 평균 값 위로 1 표준편차와 2 표준편차에 해당하는 문턱 이상의 영상 값을 갖도록 하였다. SISCOM으로 나타나는 간질 발작 진원지들과 MRI 영상에서 회색질, 백색질 및 뇌척수액의 경계들을 각각 분할하고 marching cube 알고리즘에 의해 VRML 표면 영상들로 나타내었다. 축면 영상에서 실제 거리를 나타내는 x, y 축의 길이를 측정하고 z 축선의 길이를 계산하였다. VRML을 이용한 거리 측정 도구를 만들어 이전의 VRML 표면 영상들과 융합하였다. MRI 영상을 이용하여 3D 표면 영상들의 단면을 나타내고 3D 표면 영상들의 투명도를 설정하기 위해 Java Script 루틴을 사용자 인터페이스 도구로서 삽입하였다. 웹 페이지에서 구현되는 3D 표면 영상들의 투명도와 관찰 위치를 조절함에 따라 모델들 사이의 공간적인 정보를 직관적으로 알 수 있었다. 간질 발작 진원지에 대응하는 해부학적 구조를 3D 표면 영상들을 가로지르는 MRI 평면 영상들을 통해서 확인하였다. 결론적으로 본 연구에서 제시하는 웹에 근거한 3D 융합 영상의 가시화와 위치 측정은 진단 및 치료 방사선학과 외과학 등의 분야에서 온라인 방식의 연구와 교육에 있어 많은 도움을 줄 것이다.

• Parasites, Hosts and Diseases
• /
• v.22 no.1
• /
• pp.61-65
• /
• 1984

A mass fecal examination was performed in Seoul, Korea from December 1983 to March 1984 and 15 egg positive cases of Fibricola seoulensis were discovered. They were treated with praziquantel($Distocide{\circledR}$) 20mg/kg single dose and magnesium salt for purgation. The adult worms of F. seoulensis were collected from 6 of them. The number of the flukes ranged 1-78 by the case. The cases had no clinical manifestation at all. They were all Korean males in twenties, and had the histories of eating the roast or raw snakes or frogs. Fibricoliasis is expected to be prevalent among the snake-eaters in Korea. Further cases will be detected by sedulous differentiation of thinshelled immature operculated eggs of 0.08~0.102mmn length. Praziquantel seems to be an excellent chemotherapeutic for fibricoliasis.

• Korean journal of applied entomology
• /
• v.40 no.2
• /
• pp.125-129
• /
• 2001

Some wingless species have evolved take-off behaviors that enable them to become airborne. We examined aerodynamic attributes of dispersal relative to the body size and standing vs. walking postures for three phytoseiids that were suspected to have different take-off behaviors and dispersal abilities, Phytoseiulus persimilis Athias-Henriot, Neoseiulus fallacis (Carman) and N. californicus (McGregor). The average vertical profile of Pp in the walking position was significantly higher than those of Nf and Nc when in walking position. The body height of Nf in the standing posture was significantly greater than the body height of Pp when in the walking position. Cross-section areas also showed similar patterns of difference. Nf in the standing posture would have more than twice the drag force than in walking posture because of more fluid momentum in the wind boundary layer However, Pp in the walking position would have similar drag to Nf in the standing posture because of a higher vertical profile and larger size. Thus we add the scientific evidence of presence and absence of take-off behavior of some phytoseiid mites and evolutionary aspects of aerial dispersal are further discussed.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.27 no.5
• /
• pp.361-368
• /
• 2014

Modal properties for tapered cantilever pipe-type beam is identified by applying the boundary conditions to a general solution for tapered beam. A bending stiffness for cracked beam is constructed based on an energy method for tapered cantilever thin-walled pipe, which has a through-the-thickness crack, subjected to bending. Then the natural frequencies and mode shapes of a tapered cantilever thin-walled cracked pipe are identified. It can be found that the phenomenon of the bending stiffness distribution along the beam length of the cracked beam is quite reasonable, the natural frequencies are decreased as the crack sizes are increased, and the mode shapes are changed due to the crack. This results may be used to the vibration-based crack identification for the tapered cantilever pipe-type tower structures.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.3A
• /
• pp.181-187
• /
• 2011

This paper deals with free vibrations of the Timoshenko beam supported by two elastomeric bearings at two far ends. The ordinary differential equation governing free vibrations of such beam is derived, in which both effects of rotatory inertia and shear deformation are included as the Timoshenko beam theory. Also, boundary conditions of the free end are derived based on the Timoshenko beam theory. The ordinary differential equation is solved by the numerical methods for calculating natural frequencies and mode shapes. Both effects of the rotatory inertia and shear deformation on natural frequencies are extensively discussed. Also, relationships between natural frequencies and slenderness ratio, foundation modulus and bearing length are presented. Typical mode shapes of bending moment and shear force as well as deflection are given in figures which show the positions of maximum amplitudes and nodal points.

• Journal of IKEEE
• /
• v.15 no.3
• /
• pp.241-247
• /
• 2011

In this paper, it was implemented an algorithm of multimedia fingerprinting in DCT block. For the improvement of the limits of DRM’s ability, the proposed algorithm could be decided a responsibility boundary to judge a traitor who falsified the content according to perform separately a watermarking of content provider and a fingerprinting of content user. At the test image size($128{\times}128$) and block size($8{\times}8$) of the content provider, the measured PSNR is Inf~46.6dB with watermarking strength ${\Theta}=0.5{\sim}1.2$, and at a number of users and user's code length are n=7,15,31,63 and l=7,15,31,64 each, the measured PSNR is Inf~46.1 with fingerprinting code length l=7,15,31,63. Finally, a traitor tracing of the falsified content is approached to a trace ratio 1 which is extended to n-1.

• Proceedings of the Optical Society of Korea Conference
• /
• 2000.02a
• /
• pp.236-237
• /
• 2000

용액인상법에 의하여 Cr$^{3+}$ 이온이 0.1-0.2% 주입된 Alexandrite (Cr$^{3+}$ :BeAl$_2$O$_4$) 단결정을 성장하고, 성장한 단결정을 이용하여 레이저 소자를 제조하였다. 고품질의 단결정을 성장할 수 있는 결정성장조건을 규명하고, Cr$^{3+}$ 이온의 유효편석 계수를 계산하였으며, 결정 결함 및 분광 물성을 조사하였다. 결정성장 실험 결과, 유속 3 1/min의 질소분위기, 이리듐 도가니 및 <001>방위의 Alexandrite 단결정을 종자결정으로 사용하여 결정을 성장하는 경우 최적의 결정성장 조건은 인상속도 0.5-1.0 mm/hr와 회전속도 20-25 rpm이었다. 육성된 결정은 (100)면이 넓게 발달되었으며, (120)과 (010)면이 측면에 발달되는 판상의 직팔각기둥의 형태로 성장되었다. 결정결함으로써 parasite crystal의 형성과 경계면의 균열, striation, inclusion 등이 검출되었다. Alexandrite 단결정 내에 분포하는 Cr$^{3+}$ 이온의 유효편석계수 k$_{eff}$는 2.8로 계산되었다. 분광물성으로써 실온에서의 $^4$A$_2$$\longrightarrow$$^4$T$_2$(689.6-489.3 nm), $^4$A$_2$$\longrightarrow$$^4$T$_1$(489.3-311.33m) 천이에 의한 흡수를 확인하고, $^4$T$_2$$\longrightarrow$$^4$A$_2$(650-800 nm), $^2$E$\longrightarrow$$^4$A$_2$에 의한 nophonon line R$_1$, R$_2$(680.4, 678.5 nm) 및 $^2$T$_1$$\longrightarrow$$^4$A$_2$(655.7, 649.3, 645.2 nm)의 형광방출 스펙트럼을 얻었으며, 형광수명은 0.264 ms로 조사되었다. 제조된 레이저 발진봉은 직경 6.3 m, 길이 45 nm이었다.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.33 no.2
• /
• pp.187-192
• /
• 2013

Fatigue crack was detected from a temperature change around surface crack using the thermographic technique. Thermal gradient across the crack decreased very much due to thermal resistance of contact surface in the crack. Heat diffusion flow passing through the discontinuity was visualized in temperature by infrared camera to find and locate the crack. A fatigue crack specimen(SM-45C), which was prepared according to KS specification and notched in its center to initiate fatigue crack from the notch tip, was heated by halogen lamp at the end of one side to generate a heat diffusion flow in lateral direction. A abrupt jump in temperature across the fatigue crack was observed in thermographic image, by which the crack could be located and sized from temperature distribution.

• Journal of Chest Surgery
• /
• v.36 no.1
• /
• pp.51-54
• /
• 2003

This patient was an 53-year-old man who had undergone Sengstaken-Blackmore tube insertion for esophageal varix bleeding. Two days after Sengstaken-Blackmore tube insertion, he developed severe left hemothorax and was transferred to our hospital. The esophagoscopic findings revealed a large perforation lengthening 8-cm in the intrathoracic esophagus. A left thoracotomy was performed 33 days after the injury due to repeated varix bleedings and poor conditions. An 8-cm longitudinal perforation of the intrathoracic esophagus with gross suppurative empyema was found. Primary repair and esophageal exclusion was performed 2cm proximal and distal to the perforation, using rows of nonabsorbable staplers(TA stapler 60 $\times$ 4.8) and large bore thoracostomy tubes were placed for local drainage. Six days after intrathoracic esophageal exclusion, an esophagogram revealed a leakage at just above the proximal stapling site. A cervical esophageal exclusion was performed using the same method. One hundred thirty seven days after exclusion operation for the intra-thoracic esophageal perforation, the patient was able to eat per orally without any secondary esophageal reconstructive surgery.

• Fire Science and Engineering
• /
• v.32 no.5
• /
• pp.15-21
• /
• 2018

This study examined the growth characteristics and carbonization pattern when a fire occurs due to a flammable liquid sprinkled on a vinyl floor. When acetone was sprinkled on a floor, the flame reached its peak in approximately 0.2 s after it was ignited. The lower part of the flame showed a laminar pattern while the upper part showed a turbulent pattern. The pattern showed a turbulent pattern and generated white smoke. The combustion completed floor surface showed carbonization of a dim pore pattern. In the case of benzene, an intense flame was formed in approximately 0.6 s after ignition. The flame length was measured to be approximately 50 mm. When the flame became weak, a significant amount of black smoke was generated due to incomplete combustion. The combustion completed floor surface showed carbonization of a pour pattern and splash pattern. In the case of alcohol, an intense flame was formed in approximately 1.1 s after ignition. In addition, the depth of carbonization was significant where the flammable liquid was collected and a trace of carbonization was observed at the boundary of the flow path of the flammable liquid.