• Korean Journal of Plant Taxonomy
• /
• v.37 no.3
• /
• pp.255-273
• /
• 2007

The morphological characters for 4 taxa of Korean Symplocaceae were examined. Based on morphological examination, numerical analysis was performed to clarify the taxonomic relationships among the taxa. It was found that epidermal characters of leaves, cellular deposition of petals, cellular boundary of petioles, growth of stigmas and pollen grains and their surfaces were useful diagonostic characters. From the results of PCA analysis, four taxa were grouped as species clusters including each populations. Four species of Symplocos were clustered as species groups with clear delimitation. Morphological, numerical, and palynological analyses supported the previous morphological studies on this family.

• Journal of the Society of Naval Architects of Korea
• /
• v.38 no.1
• /
• pp.43-51
• /
• 2001

The unsteady problems of ships in waves are analyzed by a low order panel method with Rankine source. Considering the basic flow as the uniform incoming flow(so called Kelvin flow) and also the double body flow. the solutions to satisfy the governing equation with the boundary conditions are obtained, and these two results are compared. The hydrodynamic coefficients for the modified Wigley hull and Series 60($C_B=0.7$) are computed and compared with the experimental data available and also other computational results published. It is shown that the computational results by the double body approximation agree well with the experimental results compared with those by the uniform Kelvin flow approximation.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.18 no.3
• /
• pp.321-332
• /
• 2005

In this paper, the time-domain finite element formulations for axisymmetric linear viscoelastic problems, especially for the viscoelastic hollow sphere and cylinder, under various boundary conditions are presented with the theoretical solutions of them obtained by using the elastic-viscoelastic correspondence principle. It is assumed that the viscoelastic material behaves like a standard linear solid in distortion and elastically in dilatation. Numerical examples are solved based on the spherically symmetric, axisymmetric and plane strain finite element models. Good agreements are obtained between numerical and theoretical solutions, which shows the validity and accuracy of the presented method.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.19 no.1 s.71
• /
• pp.85-92
• /
• 2006

This paper investigates critical loads of the tapered Beck's columns with clamped and spring supports, subjected to a subtangential follower force. The linearly tapered columns with the solid rectangular cross-section is adopted as the column taper. The differential equation governing free vibrations of such Beck's columns is derived using the Bemoulli-Euler beam theory. Both divergence and flutter critical loads are calculated from the load-frequency curves which are obtained by solving the differential equation. The critical loads are presented as functions of various non-dimensional system parameters: the taper type, the subtangential parameter and the spring stiffness.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.7 no.2
• /
• pp.15-22
• /
• 2003

Computational study using the 2-dimensional, compressible, Navier-Stokes equations is performed to predict the discharge coefficient of air flow through a film-cooling hole. In order to investigate the effect of internal/external flows on discharge coefficient, the present computational results which are obtained for three flow cases, only external flow, only internal flow, and no flow, are compared with experimental ones. It is found that the computational results predict the discharge coefficient of the film-cooling hole in a reasonable accuracy and the external crossflow reduces the discharge coefficient, while the internal crossflow increases the discharge coefficient in a range of momentum flux ratio $I_{c-jet}$ > 1 due to the total pressure loss and boundary layer effect.

• The Journal of the Acoustical Society of Korea
• /
• v.23 no.7
• /
• pp.514-520
• /
• 2004

There are many techniques for underwater source localization. These are the methods based on TDOA (Time Difference Of Arrival) estimation. beamforming techniques and high resolution techniques, etc. In this Paper we estimate the underwater source position using MCPSP (Modified Cross Power Spectrum Phase) function that is calculated on frequency domain using sensors of small number. However, the performances of the localizing method based on MCPSP function drops greatly in the case of CW (Continuous Wave) signal . In this Paper we proposed the TDOA estimation method for pulsed CW signal. In the Proposed method we composed of new segment including a edge of ping. This segment was computed by short-time energy detection. With theoretical representation the performances of the proposed method were analyzed under various environment.

• The Transactions of the Korea Information Processing Society
• /
• v.5 no.3
• /
• pp.824-832
• /
• 1998

In this paper, wc proposed new method for corner point detection on digital contours using directional angle and area dcviation_ First of all, dircctional angle was detccted according to contours by lookup table, then corner point was detected using arca deviation aftcr the pixels over standard value had selected as a candidate point. This method has the advantage the rcduction of processing time for real time processing and the reduction of round-off error on digital image reprcsentation. For vcrification of the proposed method simulation results which applied on various tcst pattern were compared with existing methods.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.18 no.10
• /
• pp.1454-1460
• /
• 1993

The scattering pattern, due to an E-Polarized wave incident on M circular parallel dielectric cylinders, is computed. The multiply-scattered fields between the cylinders are considered. Modeling of infinite cylindrical scatterer of arbitrary cross sections by a number of circular cylinders is executed. By enforcing the boundary conditions on the surface of each cylinder, an infinite set of equations is obtained. The first order of scattering results from the excitation of each cylinder by only the incident wave. The second order results from the excitation of each cylinder by the first order of scattering from the remaining cylinders, and so no to an infinite order of scattering. Although the resulting equation is of infinite size, proper truncation yields very accurate numerical results.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.8
• /
• pp.2032-2037
• /
• 2009

The load carrying capacity of bridge structures in public use is generally evaluated without considering their actual behavioral characteristics. This study examined common errors taking place in the evaluation of load carrying capacity of bridge structures. In order to account for their current behavioral characteristics such as the boundary condition, we evaluated the load carrying capacity of a bridge in terms of axial force, which was calculated by applying deflection to the buckling equation for members with initial imperfections, and in terms of bending moment obtained from deflection.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.05a
• /
• pp.373-376
• /
• 2009

영상처리 기술은 인간의 시각에 기반을 둔 영상정보와 관련된 분야에서 중요한 기반 기술로써 현재 여러 분야에서 연구가 활발하게 진행 중이다. 여러 응용 분야에서 사용되는 영상처리의 세부 기술범위는 영상 변환, 영상 개선, 영상 복원, 영상 압축등과 같이 다양하며, 이런 영상처리 기술의 중요한 연구 목표 중의 하나는 정확한 정보 추출을 위한 영상정보의 개선에 있다. 영상정보의 개선은 영상의 해석과 인식을 위한 기본적인 과제이며, 영상에서 나타날 수 있는 잡음을 제거하는 영상처리 기술이 영상정보 개선의 한 분야라고 할 수 있다. 영상정보 개선을 위한 기존의 필터링 알고리즘은 잡음제거율이 높은 만큼 경계선의 보존이 어렵다는 단점이 있으며, 이를 보완하기 위해 다른 영상처리 알고리즘을 함께 응용하여 처리함으로써 처리시간이 증가되고 원 영상의 중요한 정보를 훼손할 가능성이 존재한다. 따라서 본 논문에서는 기존의 필터링 알고리즘의 문제점을 개선하는 동시에 잡음 제거율을 높일 수 있는 Fuzzy Mask Filter 알고리즘을 제안한다. Fuzzy Mask Filter 알고리즘은 마스크에서 얻은 정보를 Fuzzy Logic에 적용하여 임계값을 구하며, 구해진 임계값을 기준으로 출력영상의 화소값을 결정하는 알고리즘이다. 본 논문에서 제안한 알고리즘의 효율성을 검증하기 위해 Impulse 잡음과 Salt pepper 잡음을 임의로 생성하여 기존의 알고리즘과 비교한 결과, 제안된 방법이 잡음 영상에 존재하는 픽셀 정보를 훼손하지 않고 잡음을 효과적으로 제거한 것을 확인할 수 있었다.