• Journal of Broadcast Engineering
• /
• v.20 no.3
• /
• pp.398-407
• /
• 2015

Compressive sensing (CS) has drawn much interest as a novel sampling technique that enables sparse signal to be sampled under the Nyquitst/Shannon rate. By noting that the block-based CS can still keep spatial correlation in measurement domain, this paper proposes to adapt sampling rate of each block in frame according to its characteristic defined by edge information. Specifically, those blocks containing more edges are assigned more measurements utilizing block-wise correlation in measurement domain without knowledge about full sampling frame. For natural image, the proposed adaptive rate allocation shows considerable improvement compared with fixed subrate block-based CS in both terms of objective (up to 3.29 dB gain) and subjective qualities.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.5
• /
• pp.132-140
• /
• 2016

In this paper, we propose boundary-preserving stereo matching method based on adaptive disparity adjustment using confidence region detection. To find the initial disparity map, we compute data cost using the color space (CIE Lab) combined with the gradient space and apply double cost aggregation. We perform left/right consistency checking to sort out the mismatched region. This consistency check typically fails for occluded and mismatched pixels. We mark a pixel in the left disparity map as "inconsistent", if the disparity value of its counterpart pixel differs by a value larger than one pixel. In order to distinguish errors caused by the disparity discontinuity, we first detect the confidence map using the Mean-shift segmentation in the initial disparity map. Using this confidence map, we then adjust the disparity map to reduce the errors in initial disparity map. Experimental results demonstrate that the proposed method produces higher quality disparity maps by successfully preserving disparity discontinuities compared to existing methods.

• The Journal of the Korea Contents Association
• /
• v.10 no.4
• /
• pp.106-114
• /
• 2010

Mesh parameterization is the process of finding one-to-one mapping between an input mesh and a parametric domain. It has been considered as a fundamental tool for digital geometric processing which is required to develop several applications of digital geometries. In this paper, we propose a novel 3D volume parameterization by means that a harmonic mapping is established between a 3D volume mesh and a unit solid cube. To do that, we firstly partition the boundary of the given 3D volume mesh into the six different rectangular patches whose adjacencies are topologically identical to those of a surface cube. Based on the partitioning result, we compute the boundary condition as a precondition for computing a volume mesh parameterization. Finally, the volume mesh parameterization with a low-distortion can be accomplished by performing a harmonic mapping, which minimizes the harmonic energy, with satisfying the boundary condition. Experimental results show that our method is efficient enough to compute 3D volume mesh parameterization for several models, each of whose topology is identical to a solid sphere.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.39 no.3
• /
• pp.256-261
• /
• 1994

To investigate the effects of topping method on the yield and major agronomic traits of three varieties differed in plant type of Hibiscus manihot the experiments were carried out Mokpo Branch Station of Crop Experiment Station, in 1993. Fresh weight of root, dry weight of culm, dry weight of capsule and dry matter ratio on root were highest in the long culmed variety, and at the plots with topping of growing point in main culm and branches(Treatment No.3). Considering from the above results, optimum topping method seemed to be topping of growing point in main culm and branches in the long culmed variety.

• Journal of Korean Society for Geospatial Information Science
• /
• v.17 no.4
• /
• pp.121-125
• /
• 2009

The Public Noticed Land Price system was developed in order to establish a practical and consistent land price information system, where land prices are appraised and publicly noticed according to the Law Governing the Public Notice of Real Estate Prices and Appraisals.The appraisal process for evaluating and appraising the public noticed land price in conducted in phases, where the nation's land is divided into human and spatial portions according to administrative districts. Depending on the subjective judgement of the appraiser, it is therefore possible for discrepancies to occur in land prices for lots near the boundaries of administrative districts. There is the computerized support system to maintain the public noticed land prices balance between the boundaries of cities, counties, and districts (the units in which evaluation and appraisal are conducted to determine public noticed land prices). But, due to that system is divided into attribute and spatial data information, it is possible for discrepancies to occur in land prices for lots near the boundaries of administrative districts. The purpose of this study to suggest the reasonable methods on discrepancies in public noticed land prices through spatial analysis using GIS.

• Economic and Environmental Geology
• /
• v.29 no.3
• /
• pp.345-355
• /
• 1996

The effectiveness of various electrode configurations in horizontal mappings and 1-D inversions of vertical sounding data for delineating 2-D structures was studied. Apparent resistivity values of three point, dipole-dipole, Wenner, and Schlumberger mappings were simulated for such structures as vertical dyke, tabular prism, buried vertical fault, ramp and complex structure by finite difference method (FDM) and they were compared with each other. Also 2-D cross sections for three structures obtained by interpolation of 1-D inverted sounding data in terms of three layers were compared for Schlumberger and Wenner arrays. On these cross sections, horizontal and vertical resistivity interfaces of the 2-D structures are revealed relatively clearly. Apparent resistivity curves of Schlumberger mapping show vertical resistivity discontinuities very well. On the whole, Schlumberger array is superior to the other arrays in electric sounding as well as mapping. This study clearly indicates that interpretations of 2-D structures based on 1-D inversion are possible.

• Journal of the Institute of Convergence Signal Processing
• /
• v.20 no.4
• /
• pp.199-204
• /
• 2019

In the boundary layer, vortical system has been analyzed by the statistical methods to identify the vortex interaction. However, there are the limitations in explaining vortices by the mean velocity or the standard deviation. This paper proposed a method to establish a frequency analysis by Fourier transform in order to simultaneously investigate various scale vortices. For this purpose, the flow visualization conducted to reveal a standing vortex, a hairpin vortex and a wake region around a hemisphere attached on a flat plate in a water channel. In addition, the velocity where the hairpin vortex was being generated in the wake region was measured by a hot-film anemometer. To observe changes in the vortex interaction, suction was applied through a hole in front of the hemisphere. For the evaluation of the proposed frequency analysis, the existing statistical results were compared to the frequency analysis that corresponds to the qualitative results of the flow visualization.

• The Journal of the Acoustical Society of Korea
• /
• v.21 no.5
• /
• pp.503-509
• /
• 2002

Cylindrical chamber silencers with an extended inlet and outlet are extensively used in many application fields to reduce the propagated noise in ducts. The basic attenuation effectiveness in the low frequency region can be explained by the reactive wave action inside the expansion chamber associated with the geometric configurations of the inlet and outlet locations, and the area expansion of the jacket. In this study. an acoustic analysis is carried out for a concentric extended pipe inserted into a simple expansion chamber. An algebraic equation is derived by using the eigenfunction expansion and orthogonality principle in which the acoustic pressures and particle velocities defined on each subdivided surface are expressed by the separable coordinates. By using the proposed analytical method, transmission losses are predicted for several configurations of the concentric extended systems and they agree very well with experimental results.

• Journal of Cadastre & Land InformatiX
• /
• v.45 no.1
• /
• pp.151-167
• /
• 2015

At present cadastral surveying is being driven fort combination of digitalized cadastral map accord with real cadastral boundary between cadastral resurvey area and World Geodetic System transformation about all country. So this study is conducted to newly establish items being needed in making digitalization of parcel boundary points based on the World Geodetic System in registration conversion surveying. For this study firstly management of mountainous districts Act, related laws and registration conversion-related laws and regulations are reviewd. Secondly, economical, administrative validation by using data from 12-branch companies of LX is analyzed. Thirdly, surveying method and procedure were established through experimental surveying on the two cases such as digital and analog area. Finally, through investigating standard of estimate about cadastral surveying, it was calculated amendment of registration conversion surveying fee based on World Geodetic coordinate System.

• The KIPS Transactions:PartB
• /
• v.9B no.2
• /
• pp.173-180
• /
• 2002

The virtual cell loss rate was introduced for the training pattern of the neural network in the VOB(Virtual Output Buffer) model. The VOB model shows that the neural network can find the connection admission boundary without the real cell loss rate. But the VOB model tends to overestimate the cell loss rate, so the utilization of network is low. In this paper, we uses the reference curve of the cell loss rate, which contains the information about the cell loss rate at the connection admission boundary. We process the patterns of the virtual cell loss rate using the reference curve, We performed the simulation with two major ATM traffic classes. One is On-Off traffic class that has the traffic characteristic of LAN data and other is Auto-Regressive traffic class that has the traffic characteristic of a video image communication.