• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.49 no.7
• /
• pp.23-31
• /
• 2012

Resource allocation, such as joint rate control and scheduling, is an important issue in cognitive radio networks. However, it is difficult to jointly consider the rate control and scheduling problem due to the stochastic behavior of channel availability in cognitive radio networks. In this paper, we propose an asymmetric joint rate control and scheduling technique under reliability constraints in cognitive radio networks. The joint rate control and scheduling problem is formulated as a convex optimization problem and substantially decomposed into several sub-problems using a dual decomposition method. An algorithm for secondary users to locally update their rate that maximizes the utility of the overall system is also proposed. The results of simulations revealed that the proposed algorithm converges to a globally optimal solution.

• Proceedings of the Korea Crystallographic Association Conference
• /
• 2003.05a
• /
• pp.9-9
• /
• 2003

최근에 Fe-CU, Fe-Si 등과 같이 자성금속과 비자성금속화합물에 대한 연구가 활발히 진행되고 있다. 본 연구에서는 기계적 합금법으로 제작한 Co/sub 5/C/sub 95/ 나노미립상 합금의 구조와 자기적 성질을 조사하였다. 그림(1)은 EXAFS 스펙트럼의 푸리에변환이다. 이로부터 합금화시간에 따라 Co-Co 결합은 점차적으로 작아지며 Co-C 결합이 진행됨에 알수 있다. 그림(2)은 합금화시간에 따른 포화자화값과 보자력의 크기이다. 포화자화는 합금화 시간에 따라 연속적으로 작아졌으며 보자력은 커지다가 작아지는 경향을 보였다. 포화자화가 작아지는 것은 Co-C 결합이 생기면서 Co의 쌍을 이루지 않은 전자가 C의 전자와 쌍을 이루면서 상쇄되기 때문인 것으로 보인다. 보자력의 거동은 Co 미립자가 다자구영역으로부터 단자구영역으로 전환되기 때문인 것으로 해석될수 있다. Co 미립자는 C의 캡슐형에 싸여있으며 60시간과 100시간에서 Co 미립자의 크기는 X-ray 회절선의 넓어짐으로부터 Scherrerr 공식을 이용하여 계산한 결과 18nm 와 15nm 정도가 됨을 알 수 있었다. 연구를 통하여 Co/sub 5/C/sub 95/ 나노미립상합금을 기계적합금법으로 만들 수 있음을 알 수 있었다. 이론적인 계산에 의하면 초상자성 Co 입자의 크기는 8.2nm 정도가 되었으며 본 실험에서 최종 입자의 크기는 15nm까지 작아졌다.

• Quality Improvement in Health Care
• /
• v.12 no.2
• /
• pp.35-40
• /
• 2006

체계적 고찰은 명확히 정의된 문헌검색에 기반하고, 결정된 기준(criteria)을 이용하여 선택된 문헌의 질을 평가하며, 타당성이 입증된 방법으로 분석을 시행하는 리뷰의 한 형태이다. 체계적 고찰은 (1)답을 얻고자 하는 질문을 공식화 하고 이에 대한 프로토콜을 작성하고, (2)해당 질문에 대한 일차 연구를 찾아서 포함시키고 (3)자료의 질을 평가하고, (4)자료를 추출하여 뽑고, (5)자료를 분석하며, (6)결과를 해석하고 보고서를 작성하는 순서로 이루어진다 하지만 체계적 고찰 혹은 메타분석이 모든 문제에 대한 해결책은 아니다. 메타분석이 수행되었다고 하더라도 질이 나쁜 연구가 포함되거나 질 문제를 무시한 경우, 이질성에 대해 적절한 주의를 기울이지 못할 때, 무차별적인 자료 병합으로 결론이 정확하지 않은 경우, 출판 비뚤림, 시간 지체 비뚤림, 이중 출판 비뚤림, 언어 비뚤림, 결과 보고 비뚤림과 같은 보고 비뚤림이 문제가 되는 경우에는 메타분석 혹은 체계적 고찰이 잘못된 결론으로 도달하도록 할 수 있다. 따라서 올바른 방법론에 기초한 체계적 고찰만이 현존하는 모든 근거를 결합하여 올바른 결론으로 이끌 수 있다.

• Journal of the International Relations & Interdisciplinary Education
• /
• v.1 no.1
• /
• pp.80-94
• /
• 2021

The "Belt and Road" economic development strategy provides new ideas for the transformation of my country's higher education. Under the guidance of the new development concept and relying on a good competitive platform, my country's higher education will have more possibilities for internationalization. The analysis of the connotation of the development concept of my country's higher education internationalization is mainly reflected in the development and tolerance of my country's higher education, and the innovation and sharing of development concepts. With this as the direction, my country's higher education institutions can combine the school's own school-running philosophy to formulate new teaching standards that are in line with international rules. Do a good job in the penetration of our country's excellent traditional culture, and handle the relationship between cultures of various countries. Actively learn from international advanced teaching concepts to build a scientific and perfect talent training mechanism.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2020.11a
• /
• pp.729-732
• /
• 2020

앞으로 4 차 산업혁명 시대에 많은 인공지능 관련 소프트웨어 및 데이터 기반 소프트웨어가 개발이 필수적이다. 문제는 이런 소프트웨어 관련 품질을 고려하지 않고 있다. 또한 많은 Python 관련 공개 소프트웨어에 대해 품질 보장이 불가능하다. 이를 위해, 코드 가시화 메커니즘, 인공지능 관련 코드 품질을 높이기 위해 AI 관련 Python 코드 복잡도 기반 고품질화 및 코드 가시화 메커니즘을 제안한다. 또한 기존의 복잡도를 측정하는 품질 메트릭스 중 하나인 McCabe's Cyclomatic 복잡도의 개선을 제안한다. 기존의 복잡도 공식에 응집도, 결합도를 가중치로 적용하여 개선된 복잡도를 계산한다. 소프트웨어의 내부 구조 및 관계와 복잡도 정보를 가시화하여 소프트웨어의 품질 향상에 기여한다.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.13 no.3
• /
• pp.373-384
• /
• 2000

To assess the safety of nonlinear steel frame structures subjected to short duration dynamic loadings, especially seismic loading, a nonlinear time domain reliability analysis procedure is proposed in the context of the stochastic finite element concept. In the proposed algorithm, the finite element formulation is combined with concepts of the response surface method, the first order reliability method, and the iterative linear interpolation scheme. This leads to the stochastic finite element concept. Actual earthquake loading time-histories are used to excite structures, enabling a realistic representation of the loading conditions. The assumed stress-based finite element formulation is used to increase its efficiency. The algorithm also has the potential to evaluate the risk associated with any linear or nonlinear structure that can be represented by a finite element algorithm subjected to seismic loading or any short duration dynamic loading. The algorithm is explained with help of an example and verified using the Monte Carlo simulation technique.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.28 no.6
• /
• pp.713-725
• /
• 2004

The two-dimensional motion of a freely falling circular cylinder in an infinite fluid is investigated numerically using combined formulation. The effect of vortex shedding on the motion of a freely falling cylinder is clearly seen: as the streamwise velocity of the cylinder increases due to gravity, the periodic vortex shedding induces a periodic motion of the cylinder. This motion in turn affects the flow field, which is manifested by the generation of the angular velocity vector of the cylinder parallel to the cross product of the gravitational acceleration vector and the transverse velocity vector of the cylinder. A correlation of St-Re relationship for a freely falling circular cylinder is drawn from the present results. The Strouhal number for a freely falling circular cylinder is found to be smaller than that for a fixed circular cylinder when the two Reynolds numbers based on the streamwise terminal velocity of a freely failing circular cylinder and the free stream velocity of a fixed one are the same. From "thought experiments", it is shown that the transverse motion of the cylinder plays a crucial role in reducing the Strouhal number and has an effect of reducing the Reynolds number from the viewpoint of the pressure coefficient. The mechanism of this reduction in the Strouhal number is revealed by the fact that the freely falling cylinder experiences a smaller lift force than the fixed one due to the transverse motion resulting in the retardation of the vortex shedding.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.26 no.12
• /
• pp.1738-1746
• /
• 2002

In the FSI (Fluid-Structure Interaction) problems, two different governing equations are to be solved together. One is fur the fluid and the other for the structure. Furthermore, a kinematic constraint should be imposed along the boundary between the fluid and the structure. We use the combined formulation, which incorporates both the fluid and structure equations of motion into a single coupled variational equation so that it is not necessary to calculate the fluid force on the surface of structure explicitly when solving the equations of motion of the structure. A two-dimensional channel flow divided by a Bernoulli-Euler beam is considered and the dynamic response of the beam under the influence of channel flow is studied. The Navier-Stokes equations are solved using a P2P1 Galerkin finite element method with ALE (Arbitrary Lagrangian-Eulerian) algorithm. The internal structural damping effect is not considered in this study and numerical results are compared with a previous work fer steady case. In addition to the Reynolds number, two non-dimensional parameters, which govern this fluid-structure system, are proposed. It is found that the larger the dynamic viscosity and density of the fluid are, the larger the damping of the beam is. Also, the added mass is found to be linearly proportional to the density of the fluid.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.3
• /
• pp.162-170
• /
• 2015

In the bandpass sampling (BPS), the sampling frequency is lower than the frequency of the signal to be sampled. In this method, the baseband spectrum can be directly obtained by the sampling operation. This makes the frequency down converter unnecessary as well as the receiver's circuit simpler. In the second-order BPS system, two sampling devices are used. When aliasing occurs due to the sampling operation, the aliased component can be cancelled by combining the two sampled signals. In this paper, it is presented a design method of the second-order BPS system when multiple interferences are simultaneously aliased to the signal component. The optimum phase of the interpolant filter is searched for maximizing the signal-to-interference ratio, and a practical formula for the suboptimal phase is derived in terms of the power spectrum profile of the BPS input. A computer simulation has been performed for the proposed second-order BPS system, and it has been shown that the signal-to-interference ratio can be increased by considering multiple aliasing.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.42 no.6
• /
• pp.63-74
• /
• 2005

In Electronic Commerce, the latest most of the personalized recommender systems have applied to the collaborative filtering technique. This method calculates the weight of similarity among users who have a similar preference degree in order to predict and recommend the item which hits to propensity of users. In this case, we commonly use Pearson Correlation Coefficient. However, this method is feasible to calculate a correlation if only there are the items that two users evaluated a preference degree in common. Accordingly, the accuracy of prediction falls. The weight of similarity can affect not only the case which predicts the item which hits to propensity of users, but also the performance of the personalized recommender system. In this study, we verify the improvement of the prediction accuracy through an experiment after observing the rule of the weight of similarity applying Vector similarity, Entropy, Inverse user frequency, and Default voting of Information Retrieval field. The result shows that the method combining the weight of similarity using the Entropy with Default voting got the most efficient performance.