• Geophysics and Geophysical Exploration
• /
• v.13 no.1
• /
• pp.40-50
• /
• 2010

The building process of any geological map involves linking sparse lithological outcrop information with equally sparse geometrical measurements, all in a single entity which is the preferred interpretation of the field geologist. The actual veracity of this interpretative map is partially dependent upon the frequency and distribution of geological outcrops compounded by the complexity of the local geology. Geophysics is commonly used as a tool to augment the distribution of data points, however it normally does not have sufficient geometrical constraints due to: a) all geophysical inversion models being inherently non-unique; and b) the lack of knowledge of the physical property contrasts associated with specific lithologies. This contribution proposes the combined use of geophysical edge detection routines and 'three point' solutions from topographic data as a possible approach to obtaining geological contact geometry information (strike and dip), which can be used in the construction of a preliminary geological model. This derived geological information should first be assessed for its compatibility with the scale of the problem, and any directly observed geological data. Once verified it can be used to help constrain the preferred geological map interpretation being developed by the field geologist. The method models the contacts as planar surfaces. Therefore, it must be ensured that this assumption fits the scale and geometry of the problem. Two examples are shown from folded sequences at the Bathurst Mining Camp, New Brunswick, Canada.

• Journal of the Korean Chemical Society
• /
• v.54 no.1
• /
• pp.77-87
• /
• 2010

Hospital-acquired methicillin-resistant Staphylococcus aureus (MRSA) has been an increasing problem worldwide since the initial reports over 40 years ago. To examine new drug leads with potential antibacterial activities, Various N'-[(-3-substituted-4-oxo-1,3-thiazolidin-2-ylidene]-4-hydroxy benzohydrazide (4a-4.i) and N'-[-(3,4-disubstituted)-1,3-thiazolidin-2ylidene)]-4-hydroxybenzohydrazide from (5.a-5.i) to (10.a-10.i) were synthesized using appropriate synthetic route. The entire test compounds (4.a-4.i) and from (5.a-5.i) to (10.a-10.i) were assayed in vitro against s. aureus strain. The minimum inhibitory concentration (MIC) was determined for test compounds and for reference standards. The test compounds showed significant antibacterial activity against the strains used, when tested in vitro. In general, p-hydroxybenzohydrazide ring and substituted thiazoline ring are essential for antimicrobial activity. Among the compounds tested, compounds 6.f, 7.g, 9.f and 10.f, 10 i were found to be most potent. The test compounds were found nontoxic upto the dose level of 2000 ${\mu}g$/mL. The intact compounds were then subjected for 3D-QSAR studies. 3D-QSAR study based on the principal of alignment of pharmacophoric features by Schrodinger PHASE module. The 3D-QSAR study allowed us to confirm the preferential binding mode of p-hydroxybenzohydrazide inside the active site.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38C no.3
• /
• pp.278-287
• /
• 2013

Modern information technologies continue to provide industries with new and improved methods. With the rapid development of Machine to Machine (M2M) communication, a smart container supply chain management is formed based on high performance sensors, computer vision, Global Positioning System (GPS) satellites, and Globle System for Mobile (GSM) communication. Existing supply chain management has limitation to real time container tracking. This paper focuses on the studies and implementation of real time container chain management with the development of the container identification system and automatic alert system for interrupts and for normal periodical alerts. The concept and methods of smart container modeling are introduced together with the structure explained prior to the implementation of smart container tracking alert system. Firstly, the paper introduces the container code identification and recognition algorithm implemented in visual studio 2010 with Opencv (computer vision library) and Tesseract (OCR engine) for real time operation. Secondly it discusses the current automatic alert system provided for real time container tracking and the limitations of those systems. Finally the paper summarizes the challenges and the possibilities for the future work for real time container tracking solutions with the ubiquitous mobile and satellite network together with the high performance sensors and computer vision. All of those components combine to provide an excellent delivery of supply chain management with outstanding operation and security.

• Journal of Life Science
• /
• v.25 no.8
• /
• pp.947-952
• /
• 2015

Prostate apoptosis response-4 (Par-4) was originally identified in androgen-independent prostate cancer cells undergoing apoptosis. Par-4 is ubiquitously expressed in normal cells and tissues, but it is downregulated in several types of cancers. Par-4 is a 38 kDa tumor suppressor protein encoded by the PARW gene. Par-4 promotes apoptosis in a variety of cancerous cells, but not in normal cells. In this review, we focused on the structure, expression and function of Par-4 in apoptotic signaling pathway. Functional domains of Par-4 include two nuclear localization sequences (NLS), a leucine zipper (LZ) domain, a nuclear export sequence (NES) and selective for apoptosis in cancer cell (SAC) domain. Many studies have underlined the importance of Par-4 in preventing cancer development. The activity of Par-4 is differently regulated by localization of intracellular and extracellular Par-4. Intracellular Par-4 inhibits Akt- and NF-κB-mediated cell survival pathways and downregulates Bcl-2 expression. Extracellular Par-4 activates the extrinsic apoptotic pathway by binding to cell surface receptor GRP78, a stress response protein that is in the endoplasmic reticulum (ER). Endogenous Par-4 sensitizes cancer cells to various apoptotic stimuli, while exogenous Par-4 enhances SAC domain-dependent apoptosis in cancer cells, but not normal cells. Therefore, Par-4 is an attractive target for cancer therapy.

• Journal of Korean Society of Forest Science
• /
• v.46 no.1
• /
• pp.1-9
• /
• 1980

This study was carried out to examine the substitution possibility into fiber pot instead of Jiffy pot for the good transplanting. Fiber pot was made of fiber, wood waste particle, and bark powder (10% of the particle weight) and also latex was added into the furnish as a binder. The pots were sprayed with just enough urea solution to prevent nitrogen deficiency of pot media coming from the breakdown of wood fiber in the pot wan during the plant growing. The utility of fiber pot was compared with that of Jiffy pot in the service test of two tree species under a green-house condition. The results obtained can be summarized as follows ; 1. Fiber pot made of 30% wood fiber+70% particle including 10% of bark powder, and 3%-latex has shown a good results like that of Jiffy pot in the sp. gr., tear factor and burst factor. For water absorption, fiber pot made of 50% fiber+50% particle, and 3%-latex got the best result. In the consideration of the above physical and mechanical properties of the fiber pot for good root penetration through the pot wall and facile handling, fiber pot made of 30% fiber+70% particle, and 3%-latex may be seemed to be good. 2. There were no harms in sapling growth in fiber pot as well as in Jiffy pot. The root penetration ability through the fiber pot was slightly inferior to that of Jiffy pot, and yet the pot damage through transportation seemed to be slighter in fiber pot than in Jiffy pot.

• Journal of dental hygiene science
• /
• v.11 no.4
• /
• pp.333-337
• /
• 2011

The purpose of this experiment was to examine possibility of microleakage by water, temperature change, and bite force inside the mouth during the period of using light-activated temporary filling materials. 2 kinds of light-activated temporary filling materials were used in order to measure weight and compressive strength and to evaluate microleakage between filling material and cavity wall according to frequency of thermal circulation. First, Light-activated temporary filling material was increased the weight, which was measured according to the period of using. As for the result of comparing between products, the weight of Quicks was indicated to be higher. Second, Compressive strength of Spacer had significant difference depending on period of using. However, significant difference wasn't shown in the compressive strength of Quicks. In Spacer that showed significant difference, the compressive strength increased greatly in the difference of 3 days. Third. As for micro-leakage according to frequency of thermal circulation, the microleakage was indicated to be the highest in the group that carried out 7,000 times. The group with operation of 1,000 times and the group with operation of 3,000 times were indicated the statistically lower micro-leakage than the group with operation of 7,000 times. This study brought about a rise in micro-leakage depending on the passage in the period of using. However, it is obvious fact that micro-leakage increases according to the passage of time after restoration.

• Bulletin of Food Technology
• /
• v.26 no.3
• /
• pp.178-187
• /
• 2013

분자단계에서 천연소재 유래 다당체는 면역 세포 표면(예, 대식세포)에 있는 한가지 또는 여러가지 수용체(${\beta}$-glucan 수용체, mannose 수용체, complement 수용체 3, Toll-like 수용체, scavenger 수용체)와 면역 반응을 시작하기 위하여 결합할 수 있고, 그 후에 신호전달을 위하여 cytokine과 second messenger($Ca^{2+}$, cAMP, cGMP, NO 등등)들을 생성한다. 그 결과로 선천면역과 적응면역을 유도하여 다양한 질환에 영향을 미친다. 추가적으로 다당체들의 면역조절은 신경내분비 체계의 조절과도 연관되어 있다. 최근 수많은 천연소재유래 다당체의 생리활성에 관한 연구가 진행되고 있다. 다양한 연구를 통해 정확한 약효, 낮은 독성과 부작용을 가진 일단의 다당체가 발견되어 현재 임상에서 암 치료에도 사용되고 있다. 이러한 사실들은 면역증진 다당체들이 항 종양치료를 위한 새로운 치료제로서 큰 시장을 개척할 수 있다는 가능성을 보여주고 있다. 이러한 사실에도 불구하고 현재 다당체에 대한 연구는 다음과 같은 취약점을 내포하고 있다. 첫째 다당체의 생리활성에 대한 정해진 비교기준이 없다. 특별히 임상 환경에서는 이러한 연구들이 중국, 일본, 한국과 일부 다른 동양국가들에 국한되어 있어 유럽이나 미국에서의 연구 자료가 결여되어있다. 둘째 현재 연구에 사용되고 있는 대다수의 천연소재 유래 다당체는 순수한 다당체가 아닌 천연 그대로의 것을 사용하고 있어 소재로부터 유래하는 다른 활성성분에 의해 쉽게 영향을 받을 수 있어 순수 다당체가 면역체계에 어떠한 역할을 수행하는지 진단하는데 어려움이 있다. 셋째 면역조절 경로에서 다당체의 정확한 신호전달 경로가 아직 정확하게 밝혀지지 않았고, 또한 동물과 임상실험에서 다당체가 작용하는 수용체 및 신호전달 경로에 대한 상반되는 결과가 발표되고 있기도 하다. 따라서 다당체의 면역조절활성에 대한 연구에 있어 다음과 같은 점들에 주목해야 할 필요가 있다. 첫째 다당체의 구조와 활성간의 상관관계를 밝혀야 할 것이다. 특히 다당체의 세부 구조 및 활성 부위를 밝혀낸다면 분자수준의 면역조절 기작을 명확히 하는데 도움을 줄 수 있을 것이다. 이러한 정보를 확보할 수 있다면 다당체의 구조를 변형시켜 활성을 증진시킬 수 있을 것이며, 또한 활성이 증가된 다당체를 합성하는 일도 가능해 질 것으로 예상된다. 마지막으로 ${\beta}$-glucan과 lentinan과 같은 정제된 다당체의 연구를 지속적으로 수행하여 효과적인 동물실험 및 임상실험 protocol을 확보하고 연구결과들에 대한 database를 구축해야 할 필요가 있다. 이러한 노력들이 성공적으로 수행된다면 천연소재유래 다당체들이 가까운 장래에 암 치료를 포함한 다양한 질병에 적용 가능한 새로운 면역조절제로 사용될 수 있을 것이다.

• Progress in Medical Physics
• /
• v.22 no.4
• /
• pp.172-177
• /
• 2011

The purpose of this study was to analyze $^{68}Ga$-BAPEN dynamic PET image in rat myocardium to evaluate potential of this radiotracer as a perfusion imaging agent. Animal PET/CT scan was done in 9 rats during 120 minutes. Especially we synthesized $^{68}Ga$-BAPEN with kit which is simple and low cost method. PET images showed the in vivo dynamic distribution of $^{68}Ga$-BAPEN in the chest region of rats. Initially $^{68}Ga$-BAPEN PET images showed aorta and liver activities and a few minutes later, $^{68}Ga$-BAPEN moved to myocardium. Regions of interest were drawn on myocardium, liver, lung and blood pool. Time-activity curves showed significant uptake of $^{68}Ga$-BAPEN in myocardium. The contrast ratios of myocardial to blood pool, lung and liver at 60 minutes after injection were 1.66, 2.82 and 0.60. To estimate accurate kinetic parameters, 60 minutes after injection was required to PET scan as myocardium image contrast ratios reached to constant values. As a result, $^{68}Ga$-BAPEN would be suitable radiotracer for PET which can applied to diagnosis of myocardial perfusion diseases after further preclinical and clinical investigations.

• Journal of the Korean Data and Information Science Society
• /
• v.23 no.5
• /
• pp.949-959
• /
• 2012

This article is to find the right size of decision trees that performs better for boosting algorithm. First we defined the tree size D as the depth of a decision tree. Then we compared the performance of boosting algorithm with different tree sizes in the experiment. Although it is an usual practice to set the tree size in boosting algorithm to be small, we figured out that the choice of D has a significant influence on the performance of boosting algorithm. Furthermore, we found out that the tree size D need to be sufficiently large for some dataset. The experiment result shows that there exists an optimal D for each dataset and choosing the right size D is important in improving the performance of boosting. We also tried to find the model for estimating the right size D suitable for boosting algorithm, using variables that can explain the nature of a given dataset. The suggested model reveals that the optimal tree size D for a given dataset can be estimated by the error rate of stump tree, the number of classes, the depth of a single tree, and the gini impurity.

• Korean Chemical Engineering Research
• /
• v.50 no.5
• /
• pp.890-893
• /
• 2012

Gas hydrates are solid crystal structures formed by enclathration of gaseous guest species into 3-dimensional lattice structure of hydrogen-bonded water molecules. These compounds can be potentially used as an energy storage/transportation medium because they can hold a large amount of gas in a small volume of the solid phase. In addition, huge amount of natural gas, buried in seabeds or permafrost region in the form of the solid hydrate, is regarded as a future energy source. In this study, synthesized natural gas, whose composition is 90.0 mol% of methane, 7.0 mol% of ethane, and 3.0 mol% of propane, was used to identify formation behaviors of natural gas hydrates for the purpose of applying the gas hydrate to a storage/transportation medium of natural gas. According to the experimental results obtained by means of the solid-state NMR and high-resolution powder XRD methods, it is found that formed natural gas hydrates have crystal structure of the structure-II hydrate, and that methane occupies both small and large cages, while the others only occupy large ones. In addition, both the NMR spectroscopy and the gas chromatograph showed that there exists preferential occupation among the natural gas components during the hydrate formation. Compositional changes after the hydrate formation revealed that the preferential occupation is in order of propane, ethane, and methane (propane is the most preferential guest species when forming natural gas hydrates).