• Title/Summary/Keyword: 결합지수

Search Result 499, Processing Time 0.024 seconds

Design of a Multiband CMOS VCO using Switched Bondwire Inductor (스위치드 본드와이어 인덕터를 이용한 다중대역 CMOS 전압제어발진기 설계)

  • Ryu, Seonghan
    • The Journal of the Institute of Internet, Broadcasting and Communication
    • /
    • v.16 no.6
    • /
    • pp.231-237
    • /
    • 2016
  • This paper presents a multiband low phase noise CMOS VCO with wide frequency tunability using switched bondwire inductor bank. The combination of bondwire inductor and CMOS switch transistor enhances frequency tunability and improves phase noise characteristics. The proposed multiband VCO operates from 2.3GHz to 6.3GHz with phase noise of -136dBc/Hz and -122dBc/Hz at 1 MHz offset frequency, respectively. Switched bondwire inductor bank shows high quality factor(Q) at each frequency band, which allows better tradeoff between phase noise and power consumption. The proposed VCO is designed in TSMC 0.18um CMOS process and consumes 7.2 mW power resulting in figure of merit(FOM) of -189.3dBc/Hz at 1 MHz offset from 6GHz carrier frequency.

Analysis on the water quality improvement effects by Tourmaline (Tourmaline의 수질개선 효과 분석)

  • Soh, Dea-Wha;Park, Jung-Cheul;Jang, Dong-Hoon;Jung, Jo-Young
    • Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
    • /
    • 2003.05d
    • /
    • pp.113-118
    • /
    • 2003
  • 투어멀린(Tourmaline)은 비대칭 쌍극자를 가진 천연 유극성 결정체로 광물 중에서 영구전기분극을 띄고 있는 유일한 물질로써 일명 "전기석"이라고 알려져 있다. 분극에 의한 자체 미약전류(약 $60{\mu}A$)와 함께 음이온 및 원적외선의 발생으로 최근 우리주변에서 건강과 환경을 위한 관심고조의 대상인 육방정계의 압전성 및 초전성을 띄는 붕규산염(주요성분: Mg, Fe, B, Si, Ca)으로, 투어멀린 원석이나 그 복합세라믹체의 면역지수가 ~1000에서 ~400,000 이상인 점을 비롯하여 그 유용성을 이용하려는 새로운 아이디어 신상품들이 계속 개발되고 있다. 뿐만 아니라 물분자를 만나면 수소$(H^+)$와 수산기 $(OH^-)$로 전기분해 하여 친수기와 소수기 부분으로 구분하며, $H^+$$OH^-$는 각각 $H_2O$와 결합하여 활성이 강한 hydronium ion$(H_3O^+)$을 생성하고, 물 속에서 계속 불안정한 상태로 존재하는 수산기는 계면활성 작용이 있는 hydroxyl ion$(H_3O_2^-)$을 형성하여 물을 약 알카리성 (pH~7.4)으로 바꿔주며, 물분자 클러스터 세분화와 미네랄을 용출, 공급하여 이 물이 체내에 흡수되면 살균, 항균성의 면역기능을 갖게 되며, 혈액정화 기능과 자율신경 자극으로 교감신경의 흥분을 억제해 준다. 이와 함께 전기분극을 띈 투어멀린 입자는 다른 물질에 비하여 경이적 수치의 원적외선을 발생하여 강력한 열 효과와 높은 침투력으로 인체의 혈액순환 촉진과 혈전용해 작용을 주어 건강과 활력에 도움을 주는 것으로 확인되어 많은 관심을 끌고 있다. 따라서 유익한 이용가치를 인정받고 있는 천연 투어멀린을 단독 형태나 또는 서로 상승효과를 줄 수 있는 유용한 타 물질과 혼합물을 구성하여 성형 또는 EPD 방법으로 전착한 후 소결 처리하여, 소결체의 특성 분석과 함께 물에 대한 전기 화학적 작용 및 항균 효과를 조사, 확인하여 수질개선 효과를 분석하고 그 응용성을 개발, 확보하였다.

  • PDF

Physicochemical Properties of Konjac Glucomannan (구약감자 Glucomannan의 이화학적 특성)

  • Kim, Nam-Soo;Ji, Soo-Kyung;Mok, Chul-Kyoon;Kim, Seung-Ho
    • Korean Journal of Food Science and Technology
    • /
    • v.26 no.6
    • /
    • pp.799-804
    • /
    • 1994
  • A 0.625% dispersion of the pretreated konjac (Amorphophallus konjac) flour was treated with 3 volumes of ethanol and the precipitate was dried at room temperature to produce purified glucomannan in 67.2% yield. Konjac glucomannan was analyzed for proximate composition and the contents of total dietary fiber and minerals. TLC analysis with a mobile phase of isopropanol : $H_2O$(4 : 1, v/v) revealed the presence of mannose and glucose as component sugars. The molecular mass of konjac glucomannan was in the range between 240 and 370 kDa as determined by HPLC with a Protein Pak 300SW column. Water holding capacity of konjac glucomannan was greater than those of most other gums except guar and xanthan gums. Konjac glucomannan accelerated foam formation of bovine serum albumin. As the concentration of konjac glucomannan increased up to 2%, maximum viscosity increased drastically, whereas the swelling time at maximum viscosity decreased. When swelling temperature increased, maximum viscosity and the swelling time at maximum viscosity decreased simultaneously.

  • PDF

Effect of Improved Runoff Module in SWAT on Water Quality Simulation (SWAT 모형의 유출해석모듈 개선이 수질모의에 미치는 영향)

  • Kim, Nam-Won;Shin, Ah-Hyun;Lee, Jeong-Woo
    • Journal of Korea Water Resources Association
    • /
    • v.42 no.4
    • /
    • pp.297-307
    • /
    • 2009
  • For reliable water quality simulation by semi distributed model, accurate daily runoff simulation should have preceded. In this study, newly developed channel routing method which is nonlinear storage method is combination of Muskingum routing method and variable storage routing method and temporally weighted average curve number method were applied for effect analysis of water quality simulation. Developed modules, which are added in SWAT models and simulation, were conducted for the Chungju dam watershed. The simulation result by each module applied effect. As a result of analysis contribute water quality modeling, nonlinear storage method is more effective than temporally weighted average curve number method. Nutrient loading discharge was affected by development of runoff delaying from improvement of channel routing, because of characteristics of nonpoint source pollution.

Implementation and Performance Analysis of PLC Scheme based on SISO/MIMO-OFDM using MRC (최대비 합성법을 이용한 SISO/MIMO-OFDM 기반 전력선 통신 방식 구현 및 성능분석)

  • Yoo, Jeong-Hwa;Choe, Sang-Ho
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.36 no.2B
    • /
    • pp.176-183
    • /
    • 2011
  • In this paper, we propose the implementation and performance analysis of power line communication based on SISO/MIMO-OFDM which focuses on high speed data transmission in smart grid and future power line grid. We employ Zimmermann frequency model and Middleton Class A model as the multipath power line fading channel and impulse noise channel, respectively. In this paper, in order to improve the three-phase or single-phase PLC performance, we introduce a new MRC (called a&f-MRC) which effectively sums up multiple antenna diversity gain and multipath fading diversity gain. Via simulation, we prove the performance advantage over existing SISO/MIMO systems. In addition, we offer the tradeoff on system design through comparing with MRC, EGC and SC.

Development of Single-Channel Thread Sensor for Rotary Bobbin by Optical Sensing (광센서를 이용한 로터리 보빈용 단채널 밑실 감지기 개발에 관한 연구)

  • Jung, Yong-Sub;Cho, Janghyun;Byeon, Clare Chisu
    • Transactions of the Korean Society of Mechanical Engineers A
    • /
    • v.38 no.10
    • /
    • pp.1085-1091
    • /
    • 2014
  • We developed a single-channel thread sensor for a rotary bobbin by optical sensing and analyzed the signal characteristics. A specially designed mount made of ABS (acrylonitrile-butadiene-styrene) resin that encapsulated an optical sensor was fabricated by using a 3D printer and was attached to the rotary bobbin system. Stable control on a weaving machine was achieved by observing the difference in the output signals of an optical sensor system, which vary significantly according to the states of the thread in the weaving operation. The optical sensor effectively detects an unintentional thread cut and run-out during weaving fast enough to enable prompt stopping of the weaving machine, thereby minimizing the loss of expensive fabrics.

Comparison of Various Indicators for Measuring Operational Performance of Container Terminals (Illustrative Case: Busan Port) (컨테이너 터미널의 운영성과 측정을 위한 제 지수의 비교 고찰 (부산항 현장자료를 중심으로))

  • Balliere Nicolas;Chun In-Sik;Kil Jong-Jin;Korbaa Ouajdi
    • Journal of Korean Society of Coastal and Ocean Engineers
    • /
    • v.18 no.1
    • /
    • pp.35-42
    • /
    • 2006
  • Recently, the harbor function is being reconsidered with the viewpoint of logistics, and various efforts are given to enhance the harbor performance agglomerating all procedures of stevedoring, treatment and background transportation of freight. The harbor performance largely depends on the efficient combination of the engineering part of harbor construction and the forthcoming logistics part. It may thus be anticipated in the future that the design concept of harbor construction will be transferred to a comprehensive consideration integrating both engineering and logistics parts to maximize the ultimate harbor operational performance. In the present study, various indicators for assessing a modem container terminal performance are presented far the purpose of helping harbor engineers understand the fundamental logistics through container handling operations. The indicators are compared, analyzed and compiled, by referring to the practical cases of Busan and Gwangyang ports as an illustration.

A Study on the Fundamental Course of Multimedia Design (멀티미디어 디자인 교육의 기초 과정에 대한 연구)

  • 이지수
    • Archives of design research
    • /
    • v.15 no.4
    • /
    • pp.223-230
    • /
    • 2002
  • As evolution of multimedia technology brings changes to industries concerned with design, new education program is needed to cultivate designers with abilities which are adapted to changed circumstance. This paper is purposed to show guideline to set up a fundamental course for multimedia design in which students know what are new presentation modes and learn how to use them, Multimedia design call for abilities of organizing information, representing, and implementing interactivity. Among them, fundamental course considers representing information as central subject. And it also contains lessons which are relative to proceeding courses. It should have students to experience creative composition and various expressions, and study cognitive or aesthetic effects of them. All activities are based on the understanding about presentation factors and principles. Basic course's lessons are composed by two main subjects, which are essential expression and matters relative to organization and interactivity. Described in detail, lessons are divided into three phases. First phase is combining presentation factors for affective effects, second is delivering message of various knowledges and third is forming simple interaction.

  • PDF

Study Of Millimeter-Wave Passive Imaging Sensor Using the Horn Array Antenna (혼 배열 안테나를 이용한 밀리미터파 수동 이미징 센서 연구)

  • Lim, Hyun-Jun;Chae, Yeon-Sik;Kim, Mi-Ra;Rhee, Jin-Koo
    • Journal of the Institute of Electronics Engineers of Korea TC
    • /
    • v.47 no.2
    • /
    • pp.74-79
    • /
    • 2010
  • We have designed a millimeter-wave passive imaging sensor with multi-horn antenna array. Six horn array antenna is suggested that it is integrated into one housing, and this antenna is effectively configurated m space to assemble with LNA of WR-10 structure. Antenna is designed to have the peak gain of 17.5dBi at the center frequency of 94GHz, and the return loss of less than -25dB in W-band, and the small aperture size of $6mm{\times}9mm$ for antenna configuration with high resolution. LNA is designed to have total gain of more than 55dB and noise figure of less than 5dB for good sensitivity. We made a detector for DC output translation of millimeter-wave signal with zero bias Schottky diode. It is shown that good sensitivity of more than 500mV/mW.

Design and Electromagnetic Characteristics of Planar Transformer (평면변압기의 설계와 전자기적 특성)

  • Kim, Hyun-Sik;Lee, Hae-Yeon;Kim, Jong-Ryung;Oh, Young-Woo
    • Journal of the Korean Magnetics Society
    • /
    • v.12 no.3
    • /
    • pp.109-116
    • /
    • 2002
  • We designed the flyback planar transformer, which had 8 W capacity, with 70 V input voltage and 8.2 V output voltage for the establishment of design method and the confirmation of application possibility. The numerical value of inductance measured under the switching frequency of 120 kHz was 1650 $\mu$H, which was the inductance efficiency of'85∼87% against theoretical value. The A.C. resistance of primary and secondary coil was 4.2 Ω and 0.25 Ω respectively, On the other hand, the quality factor for each wound numbers showed quite a high value of 158 and 75 respectively. And the Coupling Factor was 0.96∼0.97 under 120 kHz switching frequency. The inductance rapidly increased as the thickness of the core plane increased until it became 1.4 mm but under the thickness more than 1.4 mm, there was no substantial change. Therefore, the critical value of the plane thickness of core was 1.4 mm. And the shape of the output wave of the planar transformer at 70V input voltage was a stable square wave.