• Proceedings of the Korean Society of Coastal and Ocean Engineers Conference
• /
• 2003.08a
• /
• pp.199-207
• /
• 2003

발전소 온배수와 같은 페열의 방류는 여타 방류와는 달리 방류량이 단위 호기당 20-50ton/s 가량으로 매우 크며, 따라서 그 영향을 받는 해역도 매우 크다는 점이 특징이다. 최근 국내에서 시도되고 있는 심층 온배수 방류는 주변수에 비해 밀도가 작은 제트나 플룸의 형성 후 급격한 부력상승과 밀도차에 의한 수평 부력 확장(lateral buoyant spread)이 준 지배적인 현상으로 하수장의 혼합에 비해 즘 더 복잡한 양상을 띄게 된다. (중략)

• 전기의세계
• /
• v.25 no.4
• /
• pp.28-31
• /
• 1976

Thyristor는 많은 전력기기와 결합되어 전기기기 전반의 양상을 크게 변화시키고 있다. 예를 들면 변압기의 불꽃없는 탭이나 회전기의 정류자에 대치되는 무정류자전동기와 그리고 개폐기, 차단기의 대용등을 생각할 수 있다. 전력변환장치로서는 (1)직류전력을 조정하는 목적으로 Thyristor를 일종의 스위치로써 직류전압을 단속시켜 직류평균전력을 제어하는 DC Chopper (2)교류전원에 두개의 Thyristor를 역병렬접속하여 교류전류의 통전기간을 위상제어에 의하여 교류를 제어하는 AC Chopper (3)직류를 교류로 변환하는 자여식 inverter등이 있다. 본 해설에서는 지면관계상 D.C Chopper방식에 대한 기본회로와 그의 이용만을 취급한다.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.28 no.2
• /
• pp.228-237
• /
• 2001

It is well known that glass-ionomer cement and compomer can release fluoride which can inhibit the progression of dental caries. The purposes of this study were to evaluate whether the fluoride from fluoride-containing filling materials can penetrate the dentin bonding adhesive and the dentin bonding adhesive can increase the bond strength of resin-modified glass ionomer. The amount of fluoride release from resin-modified glass ionomer and compomer was measured during 28 days of period and statistically analyzed by t-test. The bond strength of each material with/without dentin bonding adhesive was measured and also statistically analyzed by t-test. The distribution of fluoride from each material into the tooth was explored by electron probe microanalysis system(EPMA). The experimental teeth used were second primary molars about to exfoliate. The amount of fluoride release from each material was diminished by dentin bonding adhesive during 28 days(p<0.05) and the bond strength was not increased by dentin adhesive in resin-modified glass ionomer. The bond strength of group VI was not detectable. The distribution of fluoride from each material into teeth was according to dentino-enamel junction and dispersed into pulp from pulpal floor. The widest distribution was shown in resin-modified glass ionomer cement filled without the application of dentin bonding adhesive.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.8 no.3
• /
• pp.205-217
• /
• 2006

Rock and discontinuities are main factors consisting of a rock mass and the physical properties of each factor have direct effects on the mechanical stability of artificial structures in the rock mass. Because physical properties of the rock and discontinuities change a lot according to the size of test materials, a close attention is needed when the physical properties, obtained from laboratory tests, are used for the design of field structures. In this study, change of physical properties of intact materials due to the change of their size are studied. Six kinds of artificial materials including crystal, instead of an intact rock, are adopted for the study to guarantee the homogeneity of specimen materials even with relatively large size. Uniaxial strength and Young's modulus of each artificial material are checked out for a size effect and compared with the predicted values by Buckingham's theorem - dimensional analysis. A numerical analysis using PFC (Particle Flow Code) is also applied and primary factors influencing on the size effect are investigated.

• Journal of Korean Society of Forest Science
• /
• v.113 no.1
• /
• pp.1-13
• /
• 2024

This study used the results of the 2022 national survey of forest welfare facilities and space users conducted in the Republic of Korea to identify the associations and combination patterns among use of forest welfare facilities and various user characteristics. In addition, a correspondence analysis-namely, a categorical data analysis-was performed regarding four facilities: National Natural Recreation Forest, National Soopchewon, National Forest Trail, and National Healing Forest. The cross-analysis revealed highly significant differences (p < .001) in the age, household income per month, means of transportation, companion type, path to information acquisition, and purpose of visit among the users of forest welfare facilities. Moreover, the results of the correspondence analysis demonstrated that users of National Soopchewon and National Healing Forest were distinguished from users of the other forest welfare facilities based on demographic characteristics such as age and household income per month. In addition, the means of transportation of National Forest Trail users differed from that of users of the other forest welfare facilities. Moreover, users of National Soopchewon were associated with the type of public group visit, acquisition of information from the websites of related institutions and facilities and via online portals, and the purpose of participating in education and experiencing education programs. Therefore, the companion type, path to information acquisition, and purpose of visit on the part of users of National Soopchewon could be differentiated from those of users of other forest welfare facilities. The findings of this study revealed the associations and combinations among forest welfare facilities and the characteristics of users of such facilities, with the scope of utilization of the forest welfare facility user data being expanded via correspondence analysis.

• Korean Journal of Food Science and Technology
• /
• v.27 no.6
• /
• pp.1028-1034
• /
• 1995

Acid-modified and cross-linked chestnut starch properties and their gel properties were examined. Hardness and cohesiveness of acid-modified starch gels were all reduced as acid treatment time was increased. And hardness of crossed-linked starch gels were increased but cohesiveness were not significantly different. Reduction rate of transmittance in acid-modified starch suspensions were higher than that of unmodified starch suspension. Hardness changes of cross-linked starch gels during 4 days of storage were little, especially in the gels made at $75^{\circ}C\;and\;85^{\circ}C$ of heating temperatures.

• The Korean Journal of Zoology
• /
• v.31 no.2
• /
• pp.95-103
• /
• 1988

Alterations in the amount of fibronectin during chick myogenesis were investigated. The amount of fibronectin as measured by immunoblotting was found to decrease during the process. As a first step in answering the precise mode of change in the level of ibronedin during myogensis, the interaction of 28,000 dalton(28 kDa) amino terminal fragment of fibronectin as well as 85,000 dalton (85 kDa) fragrxient with myoblasts was examined. The specific binding of 125 l-28 kDa fragment to myoblasts was time-dependent and reached a maximum within 60 min. Unlabelled 28 kDa fragment inhibited the binding of 125 I-28 kDa fragment, whereas 85 kDa fragment containing adhesion promoting activity did not inhibit it. This finding suggests that the 28 kDa fragment interacts with the matrix assembly receptors but not with the cell adhesion receptors. Accordingly, the decrease in the level of fibronectin is likely to correlate with the fall of fibronectin receptors on the myoblasts.

• Journal of Adhesion and Interface
• /
• v.5 no.1
• /
• pp.21-28
• /
• 2004

In this work, glass fiber/nylon 6 and woven glass fiber/nylon 6 composites have been fabricated using glass fiber reinforcements sized with 3-chloropropyltrimethoxysilane(CTMS) having a chloropropyl organo-functional group in the molecular chain end. The interfacial shear strength of glass fiber/nylon 6 composite was measured using a single fiber microbonding test and the interlaminar shear strength and the storage modulus of woven glass fabric/nylon 6 composites were measured using a short-warn shear test and a dynamic mechanical analysis, respectively, informing the effect of the concentration of CTMS on the properties. With increasing CTMS concentration, the interfacial properties of the composites were improved. The results on the interfacial shear strength, interlaminar shear strength, interlaminar failure pattern, and storage modulus with varying the CTMS concentration agree with each other.

• Journal of Korea Entertainment Industry Association
• /
• v.15 no.7
• /
• pp.125-136
• /
• 2021

The purpose of this study is to examine the appearance patterns of the 'OOjok(family)' line, which is commonly used to abbreviate Korean and Chinese Neologisms, from 2010 to 2019, and to identify the structural and Meaningful similarities and differences of the 'OOjok(family)' line Neologisms. In terms of appearance, the Korean Neologisms of the 'OOjok' was constantly created for 10 years, and the Chinese Neologisms of the 'OOfamily' was not formed in 2017 but reappeared in small quantities in 2018 and 2019. Korean and Chinese Neologisms of the 'OOjok(family)' show differences in their structural characteristics. In the case of the most actively formed compound, the preceding elements of the Korean 'OOjok' Neologisms showed various etymological elements and types. However, the Chinese Neologisms produced by 'OOfamily' showed a limited linguistic aspect due to the active compound of native languages. Derivative also showed these differences. By Classifying 'OOjok(family)' line in Korean and Chinese Neologisms as meaningful qualities, they have different characteristics, but both of them were found to have accepted colorful culture and phenomenon in various areas, and new expression meanings as their precedence element. These diverse cultures appear to have influenced the creation of the new language.

• The Journal of Korean Academy of Prosthodontics
• /
• v.61 no.3
• /
• pp.189-197
• /
• 2023

Purpose. This study aimed to compare and evaluate the shear bond strength between various temporary prostheses resin blocks fabricated by subtractive and additive manufacturing methods bonded to self-curing reline resin. Materials and methods. The experimental groups were divided into 4 groups according to the manufacturing methods of the resin block specimens and each specimen was fabricated by subtractive manufacturing (SM), additive manufacturing stereolithography apparatus manufacturing (AMS), additive manufacturing digital light processing manufacturing (AMD) and conventional self-curing (CON). To bond the resin block specimens and self-curing resin, the reline resin was injected and polymerized into the same location of each resin block using a silicone mold. The shear bond strength was measured using a universal testing machine, and the surface of the adhesive interface was examined by scanning electron microscopy. To compare between groups, one-way ANOVA was done followed by Tukey post hoc test (α = 0.05). Results. The shear bond strength showed higher values in the order of CON, SM, AMS, and AMD group. There were significant differences between CON and AMS groups, as well as between CON and AMD groups. but there were no significant differences between CON and SM groups (P > .05). There were significant differences between SM and AMD groups, but there were no significant differences between SM and AMS groups. The AMS group was significantly different from the AMD group (P < .001). The most frequent failure mode was mixed failures in CON and AMS groups, and adhesive failures in SM and AMD groups. Conclusion. The shear bond strength of SM group showed lower but not significant bond strength compared to the CON group. The additive manufacturing method groups (AMS and AMD) showed significantly lower bond strength than the CON group, with the AMD group the lowest. There was also a significant difference between the AMD and SM group.