• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.4
• /
• pp.632-637
• /
• 2016

A streetlight control system was developed using information technology and LED lights for efficient management and energy savings. The proposed system can control the power usage of an LED streetlight luminaire using GPS satellite communication and an Arduino with a built-in microprocessor. A control circuit was designed to control the current using GPS, a control unit, transistor, resistor, and constant-current supply circuit. The circuit was validated through experiments with normal operation. Using GPS, the control system extracts accurate time and location information according to the season, and it controls the current supplied to the LED streetlight according to the extracted time. Power consumption was reduced by more than 11%. The control system could reduce accidents caused by conventional lighting systems used to save energy, and it could improve the inefficient management of energy by preserving constant brightness of a streetlight at times and in areas that have less traffic.

• Journal of Adhesion and Interface
• /
• v.17 no.3
• /
• pp.96-103
• /
• 2016

In this work, pellets consisting of cellulose-based natural fiber bamboo and poly(lactic acid) (PLA) was prepared by extrusion process and then bamboo fiber/PLA biocomposites with various fiber contents were produced by injection molding process. The water treatment effect of bamboo fibers on the flexural, tensile, and impact properties and heat deflection temperature of the biocomposites were investigated. The thermal stability of bamboo and the flexural properties, tensile modulus, and impact strength depended on the presence and absence of water treatment as well as on the fiber content, whereas the heat deflection temperature are influenced mainly by water treatment. The increase of the mechanical and impact properties of biocomposites is ascribed to the improvement of the interfacial adhesion between the bamboo fibers and the PLA matrix by the water treatment. The result suggests that the pre-treatment of natural fibers by using water, which is environment-friendly and labor-friendly, may contribute to enhancing the performance of biocomposites.

• Journal of Korea Game Society
• /
• v.18 no.1
• /
• pp.39-50
• /
• 2018

Today, gamification that appeal to people and provide fun by applying game thinking and elements in many non-game fields is becoming a big issue. This study analyzed the case of 'Idea Community' in Creative Economy Town that combines online mentoring and gamification. In order to foster and select ideas, we conducted the open simulated investment and mentoring. In this process, members are able to acquire experience points and raise the level when doing certain activities. Besides, members felt their sense of accomplishment by receiving internal/external rewards for their activities. The results will be an importance reference for the application of gamification in various fields.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.4C
• /
• pp.277-282
• /
• 2012

In this paper, we present a real-time eye contact system for realistic telepresence using a Kinect depth camera. In order to generate the eye contact image, we capture a pair of color and depth video. Then, the foreground single user is separated from the background. Since the raw depth data includes several types of noises, we perform a joint bilateral filtering method. We apply the discontinuity-adaptive depth filter to the filtered depth map to reduce the disocclusion area. From the color image and the preprocessed depth map, we construct a user mesh model at the virtual viewpoint. The entire system is implemented through GPU-based parallel programming for real-time processing. Experimental results have shown that the proposed eye contact system is efficient in realizing eye contact, providing the realistic telepresence.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.35 no.10
• /
• pp.1075-1081
• /
• 2011

A leak-detection method has been developed by measuring the pressure variation between the inner and outer heattransfer tubes of a double-wall tube steam generator. An experiment was carried out to measure the leak rate in the gap between two surfaces pressed with a hydraulic press in order to simulate the phenomena, and a correlation was determined for the leak rate in a micro gap. However, in the correlation, the gap width and friction coefficient were coupled with the surface roughness, which affects the two parameters. The two parameters were separated using a surface-contact model to develop a correlation for the friction coefficient. The correlation was compared with the existing correlations used for crack analysis. Although the applied ranges of Reynolds numbers were different, the developed correlation for Reynolds numbers of 0.1.0.35 showed similar tendencies to existing correlations used for higher Reynolds numbers.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.35 no.11
• /
• pp.1157-1162
• /
• 2011

The parking brake is an essential unit embedded in the track-driving motor of an excavator. The parking brake plays an important role in keeping the excavator in place not only when it is parked, but also during the digging operation. In fact, the load placed on the parking brake during the digging operation is significantly higher than the parking load, because the impact and rating loads caused by the bucket digging force cycle frequently and have very high load ranges. Therefore, the load conditions during the digging operation should be taken into account in the parking brake certification test. In this study, a series of experiments was carried out in which various operating pressures were applied to the parking brake, where repeated loads were reciprocally placed on the brake by locking the multifriction disc and releasing the hydraulic cylinder. The characteristics of the parking brake were investigated by comparing the obtained experimental results and the theoretical design specifications.

• Journal of The Korean Association of Information Education
• /
• v.22 no.1
• /
• pp.23-32
• /
• 2018

This study is about in-service training structure combined digital competence and pedagogical knowledge in order to improve digital tools skill of a teacher in the school. Meanwhile domestic teacher training has been revealed low-level of applying into a teaching in the k12 school. Thus this study proposed teacher training system with focus on TPK sub-categories of TPACK. The core contents of TPK is to select appropriate digital tool for its teaching & learning. Additionally it is to select elements of teaching & learning associated with an attribute of digital tool. And this study presented modularize of 3 step such as teaching objective, teaching contents, assessment. Also we proposed that this training system should be operated with problem solving method which trainee itself compose TPK elements. And we committed quality investigation about picking up Strategies of TPK elements and the teacher training frame. The Participants concluded having a validity about TPK strategies, teacher training framework.

• Journal of Digital Convergence
• /
• v.14 no.7
• /
• pp.373-383
• /
• 2016

With mobile-epoch and emerging of Fin-tech, Bio-recognition technology utilizing bio-information in secure method has spread. Specially, In order to change convenient payment services and transportation cards, the combination of biometrics and mobile services are being expanded. The basic concept of authentication such as access control, IA&A, OpenID, OAuth 1.0a, SSO, and Biometrics techniques are investigated, and the protocol stack for security API platform, FIDO, SCIM, OAuth 2.0, JSON Identity Suite, Keystone of OpenStack, Cloud-based SSO, and AIM Agent are described detailed in aspect of application of AIM. The authentication technology in domestic and foreign will accelerate technology development and research of standardization centered in the federated FIDO Universal Authentication Framework(UAF) and Universal 2 Factor Framework(U2F). To accommodate the changing needs of the social computing paradigm recently in this paper, the trends of various authentication technology, and design and function of AIM framework was defined.

• KSBB Journal
• /
• v.22 no.6
• /
• pp.426-432
• /
• 2007

We have developed a sensitive, one-step, homogeneous open sandwich fluoroimmunoassay (OsFIA) based on fluorescence resonance energy transfer (FRET) and luminescent semiconductor quantum dots (QDs). In this FRET assay, estrogen receptor-$\beta$ (ER-$\beta$) antigen was incubated with QD-labeled anti-ER-$\beta$ monoclonal antibody and AF (Alexa Fluoro)-labeled anti-ER polyclonal antibody for 30 minutes, followed by FRET measurement. The dye separation distance was estimated to be between $80\sim90\;{\AA}$. The present method is rapid, simple and highly sensitive, and did not require the bound/free reagent separation steps and solid-phase carriers. A concentration as low as 0.05 nM (2.65 ng/ml) receptor was detected with linearity ($R^2$ > 0.990). In addition, the assay was performed with commercial antibodies. This assay provides a convenient alternative to conventional, laborious sandwich immunoassays.

• Korean Chemical Engineering Research
• /
• v.48 no.2
• /
• pp.232-243
• /
• 2010

Gas hydrates are crystalline solids composed of water and gas molecules. Water molecules are linked through hydrogen bonding and create cavities(host lattice) that can capture a large variety of guest molecules under appropriate conditions, generally high pressure and low temperature. Recently, many researchers try to apply gas hydrates to industrial processes to capture greenhouse gases due to the facts that the process is eco-friendly and target gas molecules can be preferentially captured. In this paper, we introduced recent studies on $CO_2$ and $CO_2-N_2$ mixture hydrates to evaluate the feasibility of industrial application of gas hydrate technology to $CO_2$ capture process. Specifically, we put emphasis on the technical feasibility of $CO_2$ separation in steel industry using gas hydrate formation principles.