• Journal of the Korea Convergence Society
• /
• v.12 no.6
• /
• pp.107-112
• /
• 2021

The purpose of this to study a more accurate scoring method in accordance with the change in the game due to the fast-break and external shots of modern basketball. We will make to design and develop a smart basketball device with a digital pressure sensor. The basketball is a sport that combines complex techniques such as dribbling, passing, and shooting, and the game wins or loses with the most goals in all sports on the planet. In particular, shooting, which determines the win or loss of a game, is the technique that is most directly linked to the score, so the angle of projection is important to make a more accurate shooting. The purpose of this to develop an assistive device in order for the player to have a certain shooting rhythm by measuring the throw angle through a sensor that can measure the throw angle of the ball during shooting. This smart basketball device, it is possible to increase the accuracy of shooting through a certain throw angle at the basketball game field or during shooting practice, and accordingly, the performance can be expected to improve.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.22 no.2
• /
• pp.81-88
• /
• 2020

Pleurotus pulmonarius 8 cultivas, domestically bred, were cultivated and evaluated for cultural properties. The morphological properties of 8 cultivars were big diameter of pileus and short stipe. Stipe was eccentrically combined with pileus. The longest length of stipe was Yeoleumneutali 2ho(72.8mm) while shortest cultivar was Yeoleumneutali 1ho(33.8mm). The diameter of pileus ranged 45.8-62,3mm, Yaksan was the smallest one and Yeoleumneutali 2ho was largest cultivar. Yield was largest in Yeoleumneutali 2ho(80.7g) whereas smallest was in Yeoleumneutali 1ho(35.5g). The highest L value was in Yeoleumneutali 2ho and Hosan. Lightness was not even around pileus but thicker in rim area and thinner in center of pileus. Average period of pinheading and harvest were 4.6 and 8.0 days thus only 3-4 days after pinheadng were required for harvest.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.17 no.4
• /
• pp.577-586
• /
• 2022

Detection and classification of steel surface defects are critical for product quality control in the steel industry. However, due to its low accuracy and slow speed, the traditional approach cannot be effectively used in a production line. The current, widely used algorithm (based on deep learning) has an accuracy problem, and there are still rooms for development. This paper proposes a method of steel surface defect detection combining EfficientNetV2 for image classification and YOLOv5 as an object detector. Shorter training time and high accuracy are advantages of this model. Firstly, the image input into EfficientNetV2 model classifies defect classes and predicts probability of having defects. If the probability of having a defect is less than 0.25, the algorithm directly recognizes that the sample has no defects. Otherwise, the samples are further input into YOLOv5 to accomplish the defect detection process on the metal surface. Experiments show that proposed model has good performance on the NEU dataset with an accuracy of 98.3%. Simultaneously, the average training speed is shorter than other models.

• The Bulletin of The Korean Astronomical Society
• /
• v.45 no.1
• /
• pp.69.3-69.3
• /
• 2020

우주개발과 활용이 주요 화두가 된 현대에 보다 빠르고 정확한 우주환경 예보는 전략적으로 매우 중요하다. 이에 우리는 광대역태양영상분광망원경(Wide-Field Solar Spectro-Imaging Telescope, Post SOlar Flare Telescope: PSOFT)을 활용한 태양전면 영상분광감시체계를 구성하고자 한다. 전세계 세 곳에 PSOFT를 배치하여 우주환경에 중대한 영향을 주는 요소인 태양의 플레어와 홍염 분출과 같은 현상과 표면의 다양한 활동들을 실시간으로 관측 분석하고자 한다. PSOFT는 30cm 구경의 광학계에 고속영상분광기를 결합하여 태양 전면의 분광영상을 약 1초각의 영상해상도와 5분의 시간해상도로 획득한다. 태양 전면을 슬릿으로 스캔하는 방식으로 H alpha와 Ca II 854.2nm선의 분광정보를 획득하는데 팁틸트 미러를 이용하여 1차적인 시상보정과 함께 스캔모션을 함께 구현함으로써 1)광학계 구조를 단순화하고, 2) 빠른 스캔이 가능하다. PSOFT로 얻은 태양전면 채층분광영상 데이터는 정밀한 우주환경 예보에 필요한 플레어나 홍염분출의 발생초기 정보를 제공할 뿐 아니라 태양 저층대기에서 발생하는 자기재연결, 파동 등에 대한 통계적 연구자료를 제공할 것으로 기대한다.

• The Journal of the Korea Contents Association
• /
• v.16 no.10
• /
• pp.598-607
• /
• 2016

The purpose of this study is to suggest necessity of idea expression method suitable for people in our country and deduct Graphic Ideation method by grasping problems of existing idea expression method. The idea expression method (association stimulating method, conceptual shifting method, information combination method) used by many graphic designers is effective in suggesting initial keyword, but has difficulty in the course of deducting the concept. Though deduction of core keyword is important to develop as a concept, the course of separation, combination in keyword connection play an important role, and most of idea expression methods are unavailable for suggesting concrete method for the course. Also as most of idea expression methods were developed and delivered in English-speaking world, it is suitable in English-speaking world culture which has thinking focused on words, but people in our country, which have thinking focusing on narration, cannot consider difference in language thinking due to limitation in idea for each stage. This study deducted idea expression method suitable for emotion of people in our country by proving the value of this idea expression method with style of suggesting and demonstrating 4 hypotheses in order to make the course for easy connection, separation, combination of keyword deducted by existing idea expression method, as well as suggesting idea expression method design based on these hypotheses. This idea expression method used rhetoric so that it is suitable for people our country who are strong for narration expression.

• Progress in Medical Physics
• /
• v.19 no.1
• /
• pp.42-48
• /
• 2008

Bio-implantable devices such as heart pacers, gastric pacers and drug-delivery systems require power for carrying out their intended functions. These devices are usually powered through a battery implanted with the system or are wired to an external power source. This paper describes an inductive power transmission link, which was developed for an implantable stimulator for direct stimulation of denervated muscles. The carrier frequency is around 1MHz, the transmitter coil has a diameter of 46mm, and the implant coil is 46mm. Data transmission to the implant with amplitude shift keying (ASK) and back to the transmitter with passive telemetry can be added without major design changes. We chose the range of coil spacing (2 to 30mm) to care for lateral misalignment, as it occurs in practical use. If the transmitter coil has a well defined and reliable position in respect to the implant, a smaller working range might be sufficient. Under these conditions the link can be operated in fixed frequency mode, and reaches even higher efficiencies of up to 37%. The link transmits a current of 50 mA over a distance range of 2-15 mm with an efficiency of more than 20% in tracking frequency. The efficiency of the link was optimized with different approaches. A class E transmitter was used to minimize losses of the power stage. The geometry and material of the transmitter coil was optimized for maximum coupling. Phase lock techniques were used to achieve frequency tracking, keeping the transmitter optimally tuned at different coupling conditions caused by coil distance variations.

• KSBB Journal
• /
• v.22 no.6
• /
• pp.409-413
• /
• 2007

Polydiacetylene(PDA)-based sensors possess a number of properties that can be successfully applied for label-free detection system. PDA is one of the most attractive color-generating materials, with growing applications as sensors. Here we introduce various PDA-based devices, used as biosensor, chemosensor, thermosensor, and optoelectronics sensor. In general, PDA liposomes and films are closely packed and properly designed for polymerization via 1,4-addition reaction to form an ene-yne alternating polymer chain. PDA-based two/three dimensional structures have been used for colorimetric or fluorescent devices, sensing biological as well as chemical components. This color-generating material also present a very high charge carrier mobility, allowing its application as field-effect transistor (FET). The immobilized PDA structures or films have distinct advantages for the detection of low concentration target molecules over the aqueous solution-based detection systems. In the present review, reported detection methods by using various PDA structures are summarized with updated references.

• Journal of Korea Multimedia Society
• /
• v.10 no.10
• /
• pp.1310-1318
• /
• 2007

First of all, What was the modeling technique used to model 3D-Game character? It's a technique developed along several years, by experience... here is the bases Low polygons characters I always work in low polygon for two reasons -You can easily modify a low-poly character, change shapes, make morph for facial expressions etc -You can easily animate a low-poly character When the modeling is finished, Second, In these days, Computer hardware technologies have been bring about that expansion of various 3D digital motion pictured information and development. 3D digital techniques can be used to be diversity in Animation, Virtual-Reality, Movie, Advertisement, Game and so on. Besides, as computing power has been better and higher, the development of 3D Animations and Character are required gradually. In order to satisfy the requirement, Research about how to make 3D Game modeling that represents Character's emotions, sensibilities, is beginning to set its appearance. 3D characters in 3D Games are the core for the communications of emotion and the informations through their facial expression and characteristic motions, Sounds to Users. All concerning about 3D motion and facial expression are getting higher with extension of frequency in use. Therefore, in this study we suggest the effective method of modeling for 3D character and which are based on 2D Graphics.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.17 no.3
• /
• pp.267-274
• /
• 2017

Recently, several researches have been studied on agricultural automation system according to convergence of IT technology with agriculture. An automatic control system of the growth environment in crops is one of the these researches. The controls of damages caused by diseases and insects pest in crops are mainly carried out by manual mode or semi-automatic mode because of farmer's concerns for poor efficiency. But, this situation needs to be improved because it occurs various problems, such as human exposure to toxic pesticides, environmental pollution and waste due to drug overuse. In order to solve these problems, we developed an automatic quantity control system which based on the amount of pesticides for area under cultivation. The amount of pesticides is calculated according to the manufacturer's instruction for pesticides. To verify the effectiveness of our developed automatic system, we also compared with the systems of manual mode and the semi-automatic mode. The experimental results of a pest control performance of an automatic quantity control system showed that automatic system can reduce overuse of drugs. These results suggested that it can be expected to replace the existing system, with equivalent effectiveness to the manual mode.

• Korean Journal of Weed Science
• /
• v.10 no.3
• /
• pp.202-206
• /
• 1990

Field experiment was conducted to develop a model of controlled release of oxyfluorfen by using various split applications. Rice and some weed species was included in this study. The models of split applications were 10-10-0. 10-10-10. 20-20-0, 20-10-10. 20-20-20, 0-40-0, and 0-0-0g/Ha at 3days before transplanting, and 11 days after transplanting, respectively. Rice injury appeared dispeared at 20 g/Ha of oxyfluorfen on low leaf sheath but disappeared at few days. The injury was reduced by split application even at the same rate of application. However, no injury was siginificant at 30 days after transplanting. Barnyardgrass, Monochoria, and arrowhead were most susceptible to oxyfluorfen, but bulruch and most perennial weeds recovered after temporary growth inhibition. Therefore, to develop oxyflourfen for use in rice transplanting of adult rice seedling, split application with reduced rates, and development of expected to be tank-mixed or premixed with other perennial herbicides to obtain droad spectrum of weeds.