• Journal of the Korean Society for Nondestructive Testing
• /
• v.35 no.5
• /
• pp.332-340
• /
• 2015

Acoustic emission (AE) is an effective nondestructive test that uses transient elastic wave generated by the rapid release of energy within a material to detect any further growth or expansion of existing defects. Over the past decades, because of environmental issues, the use of compressed natural gas (CNG) as an alternative fuel for vehicles is increasing because of environmental issues. For this reason, the importance and necessity of detecting defects on a CNG fuel tank has also come to the fore. The conventional AE method used for source location is highly affected by the wave speed on the structure, and this creates problems in inspecting a composite CNG fuel tank. Because the speed and dispersion characteristics of the wave are different according to direction of structure and laminated layers. In this study, both the conventional AE method and the energy based contour map method were used for source location. This new method based on pre-acquired D/B was used for overcoming the limitation of damage localization in a composite CNG fuel tank specimen which consists of a steel liner cylinder overwrapped by GFRP. From the experimental results, it is observed that the damage localization is determined with a small error at all tested points by using the energy based contour map method, while there were a number of mis-locations or large errors at many tested points by using the conventional AE method. Therefore, the energy based contour map method used in this work is more suitable technology for inspecting composite structures.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.2
• /
• pp.237-242
• /
• 2009

Comparing with fixed-type Robots, Mobile Robots have the advantage of extending their workspaces. But this advantage need some sensors to detect mobile robot's position and find their goal point. This article describe the navigation teaching method of mobile robot using omni-directional position detection system. This system offers the brief position data to a processor with simple devices. In other words, when user points a goal point, this system revise the error by comparing its heading angle and position with the goal. For these processes, this system use a conic mirror and a single camera. As a result, this system reduce the image processing time to search the target for mobile robot navigation ordered by user.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.8 no.4
• /
• pp.344-350
• /
• 2003

In this paper, an estimation technique of initial rotor position at standstill in Switched Reluctance Motor(SRM) is proposed. In case search coils are used as a position sensor, it has many advantages like low cost, decrease in the volume, high robust characteristics and wide applications. However, the initial rotor position detection is very difficult because the search coil's EMF is not exist at a standstill. In this paper, a near estimation method of initial rotor position is suggested using squared Euclidean distance. The simulation and experiment for the proposed method are achieved. The validity of the proposed method is verified by experimental results.

• Proceedings of the KWS Conference
• /
• 2001.05a
• /
• pp.318-321
• /
• 2001

클래딩은 주요 산업분야에 내마모성, 내부식성의 향상을 위해 사용되고 있다. 그러나 클래딩 공정에서는 모재와 클래딩 재료의 물리적, 화학적 특성의 차이와 여러 가지 공정 변수의 영향으로 제품의 사용에 치명적인 손상을 줄 수 있는 균열, 슬래그 개재물, 기공등의 불연속이 발생하기 쉽다. 본 연구에서는 클래딩 시에 발생되는 불연속을 실시간으로 검출하는데 아주 우수한 검출능력을 갖고 있는 비파괴 검사 방법인 음향방출시험을 적용하고 검출된 신호에 대한 주파수 분석과 2차원 위치표정을 실시하여 균열, 기공 등의 불연속을 검출하였고 이를 주사전자현미경을 통하여 확인하였다. 음향방출법에 의해 클래딩부에서 발생하는 결함에 대한 실시간 평가가 가능함을 입증하였으며, 특히 다층 클래딩이나 넓은 면적의 클래딩시에 불연속을 가장 신속하게 감지할 수 있으므로 이를 생산공정에 활용한다면 클래딩 또는 용접부 품질감시를 위한 효과적인 방법이 될 것이다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2010.04a
• /
• pp.566-569
• /
• 2010

레이저 포인터를 검출하는 과정은 포인터의 위치를 검출하는 과정과 입력된 레이저 포인터의 좌표를 모니터의 좌표로 변환하는 과정으로 나눌 수 있다. 레이저 포인터의 추적에 있어서 다변하는 환경의 영향으로 강건성의 확보가 어렵다. 기존의 추적 방식인 Mean-Shift 알고리즘의 경우에는 계산량이 많아서 실시간으로 입력되는 동영상에는 부적합하다. 반면에 CamShift 알고리즘은 빠른 수행이 가능하여 비디오 영상 및 실시간 영상에 적용하기에 적합하고 배경 변화의 영향을 적게 받는다. 또한 검출하려는 색과 같은 색에 의해서 간섭 받는 현상을 방지할 수 있다. 배경이 복잡한 형태이거나 배경이 동적으로 움직일 때에도 강건한 결과를 얻을 수 있다. 제안된 알고리즘을 실환경에 적용한 결과 검출하고자 하는 물체가 예측 영역을 넘나들거나 또는 화면으로부터 지나치게 멀어지거나 가까워져서 상대적인 크기가 변화할 수 있는 불확실한 변화에도 안정적으로 반응함을 알 수 있었다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2002.04a
• /
• pp.717-720
• /
• 2002

본 논문은 주성분분석(Principal Component Analysis, PCA)을 통하여 실시간 얼굴 검출 및 추적 방법을 제안한다. 제안된 방법은 얼굴 영역 검출과 추적의 두 단계로 구성되어 있다. 검출 단계에서는 피부색깔 모델과 움직임 정보를 이용하여 얼굴 후보 영역들을 검출하고, 검출된 후보 영역들을 주성분 분석을 통하여 검증한다. 추적 단계에서는 검출된 얼굴들 중에서 현재 추적 중인 얼굴과 가장 유사한 얼굴을 찾아 전체 영상의 중심에 위치하도록 pan/tilt 위에 놓여진 카메라를 제어하여 추적한다. 제안된 방법은 잡음이 많은 배경 상황에서도 존은 실험 결과를 보여준다.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2011.11a
• /
• pp.280-281
• /
• 2011

단말기 기술의 향상으로 과거 다시점 영상 디스플레이가 어려웠지만 현재는 다양한 3D 디스플레이 장치가 개발되고 있으며 2장의 영상을 활용한 스테레오 영상 단말 뿐 아니라 다시점 영상 단말도 개발되고 있다. 다시점 방송 및 콘텐츠를 이용하기 위한 장치는 사용자가 콘텐츠를 감상하는 거리, 각도 및 개개인의 취향에 따라 각기 다른 실감정도를 보여주고 있으며 단말 장치 및 사용자는 끊임없이 움직이게 되므로 이에 대한 대처가 필요하다. 본 논문에서는 사용자의 위치를 파악한 후 그 결과에 따라서 단말장치에서 연속적으로 사용자에게 적절한 깊이 정보를 송출하기 위한 알고리즘을 개발하였다. 사용자의 얼굴 및 눈을 검출하였으며 기존 알고리즘의 문제점인 눈이 아닌 눈썹 또는 눈 주변의 어두운 영역으로 인한 오인식의 문제점을 해결하였다. 눈썹의 위치를 인식하여 눈썹 영역과 눈 영역의 분리를 통한 정확한 눈 위치추적 알고리즘 결과 테스트스트림에 따라 최대 52%의 오차율 향상을 보였다.

• Journal of the Korean Society of Radiology
• /
• v.11 no.4
• /
• pp.183-188
• /
• 2017

In recent years, the automatic remote control controller of the gamma ray irradiator malfunctions, and radiation workers are continuously exposed to radiation exposure accidents. In the non-destructive testing field, much time and resources are invested in establishing a radioactive source monitoring system in order to prevent potential incidents of radiation. In this study, the gamma-ray response properties of the lead monoxide-based radiation detector were estimated through monte carlo simulation as a previous study for the development of a radioactive source location monitoring system that can be applied universally to various non-destructive testing equipment. As a result of the study, the optimized thickness of the radiation detector varies according to the gamma-ray energy emitted from the radioactive source, and the optimized thickness gradually increases with increasing energy. In conclusion, the optimized thickness of the lead monoxide-based radiation detector was $200{\mu}m$ for the Ir-192, $150{\mu}m$ for the Se-75 and $300{\mu}m$ for the Co-60. Based on these results, the appropriate thickness of lead monoxide-based radiation detector considering secondary-electron equilibrium was evaluated to be $300{\mu}m$ for general application. These results can be used as a basic data for determining the appropriate thickness required in the radiation detector when developing a radiation source location monitoring system for universal application to various non-destructive testing equipment in the future.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.18 no.6
• /
• pp.445-454
• /
• 1998

In order to establish a technical concept for the detection of defects in weldments in thin steel plate, an experimental and theoretical investigation was carried out for artificial defects in a steel plate having a thickness of 2.4mm by using the guided wave technique. In particular the goal was to find the most effective testing parameters paying attention to the relationship between the excitation frequency by a tone burst system and various incident angles. It was found that the test conditions that worked best was for a frequency of 840kHz and an incident angle of 30 or 85 degrees, most of the defects were detected with these conditions. Also, it was clear that a guided wave mode generated under an incident angle of 30 degrees was a symmetric mode, So, and that of 85 degrees corresponded to an antisymmetric mode, Ao. By using the two modes, most of all of the defects could be detected. Furthermore, it was shown that the antisymmetric mode was more sensitive to defects near the surface than the symmetric mode. Theoretical predictions confirmed this sensitivity improvement with Ao for surface defects because of wave structure variation and energy concentration near the surface.

• Korean Journal of Optics and Photonics
• /
• v.28 no.1
• /
• pp.1-8
• /
• 2017

A method for inspecting defects in display substrates utilizing Fourier optics is proposed in this paper. A cost-effective inspection system can be realized with the proposed method, because it does not require a high-magnification microscope. Also, the proposed method can avoid tight tolerance for variations in displacement between substrate and camera, which is stems from shallow depth of field of the high-magnification microscope. In addition, possible damage caused by collisions between substrate and the inspection equipment can be avoided. The decision algorithm can be simpler than for a conventional inspection system, because spatial shift of periodic substrate patterns does not affect the intensity distribution of the diffracted light, by the Fourier transform property. The proposed method is explained with numerical studies, and experiments are carried out to check its feasibility for color-filter substrates of a liquid-crystal display.