• Journal of the Korea Society of Computer and Information
• /
• v.28 no.10
• /
• pp.1-8
• /
• 2023

If there is a defect in the wheel bearing, which is a major part of the car, it can cause problems such as traffic accidents. In order to solve this problem, big data is collected and monitoring is conducted to provide early information on the presence or absence of wheel bearing failure and type of failure through predictive diagnosis and management technology. System development is needed. In this paper, to implement such an intelligent wheel hub bearing maintenance system, we develop an embedded system equipped with sensors for monitoring reliability and soundness and algorithms for predictive diagnosis. The algorithm used acquires vibration signals from acceleration sensors installed in wheel bearings and can predict and diagnose failures through big data technology through signal processing techniques, fault frequency analysis, and health characteristic parameter definition. The implemented algorithm applies a stable signal extraction algorithm that can minimize vibration frequency components and maximize vibration components occurring in wheel bearings. In noise removal using a filter, an artificial intelligence-based soundness extraction algorithm is applied, and FFT is applied. The fault frequency was analyzed and the fault was diagnosed by extracting fault characteristic factors. The performance target of this system was over 12,800 ODR, and the target was met through test results.

• Proceedings of the Korean Society of Embryo Transfer Conference
• /
• 2007.05a
• /
• pp.39-50
• /
• 2007

Sexing from bovine embryos fertilized in vitro implicates a possibility of the sex controlled cattle production. This study was carried out to produce the sex determined cattle through the embryonic sexing by fluorescence in situ hybridization (FISH) technique. FISH was achieved in in vitro fertilized bovine embryos using a bovine Y-specific DNA probe constructed from the btDYZ-1 sequence. Using this probe, a male-specific signal was detected on 100% of Y-chromosome bearing metaphase specimens. The analyzable rate of embryonic sexing by FISH technique was about 93% (365/393) regardless of embryonic stages. As tested single blastomere by FISH and then karyotype with their biopsied embryos, the accuracy of sex determination with FISH was 97.6%. We tried the embryo transfer with sex determined embryos on 15 cattle. Among them, the 5 cattle delivered calf with expected sex last year.

• Journal of Korea Technology Innovation Society
• /
• v.21 no.1
• /
• pp.130-150
• /
• 2018

Technology valuation refers to the act, procedures, or techniques in evaluating certain technology and its value for commercialization. For this purpose, deadlines and process plans are established based on valuation goals such as technology transfer, investment and financing, investment in kind, and strategy establishment. The technology valuation process involves analyzing and evaluating technology performance, rights, marketability, and business value technology, as well as calculating the monetary value of technology modules based on the results. Analysis and evaluation of each module is performed by a team of experts having knowledge of specific technology. Valuation of technologies is conducted as independent projects by project managers (PM) who integrate and manage modules; they must have expertise in systematic performance of task support and management to ensure objectivity and reliability. Furthermore, the valuation team comprises expert stakeholders having knowledge about each module due to the nature of technology valuation. For smooth knowledge sharing in technology and valuation procedures, communication skills and roles of PMs supporting and managing the valuation are important. Primarily, PMs must resolve conflicts between evaluators participating in different tasks, evaluators and evaluatees, and technology holders and receivers. This study examines technology valuation for four conflicts occurring frequently among stakeholders providing valuation support to PMs, and seeks resolutions. The conflicts and resolutions discussed in this study may lead to more specialized roles of PMs in technology valuation and project management, as well as systemized valuation support and management plans.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.8A
• /
• pp.918-927
• /
• 2004

WCDMA system is 3rd generation wireless mobile system specified by 3GPP. In WCDMA downlink, two power control schemes are operated. One is inner loop power control operated in every slot. Another is outer loop power control based on one frame time. Base station (BS) can estimate proper transmission power by these two power control schemes. However, because each MS's transmission power makes a severe effect on BS's performance, BS cannot give excessive transmission power to the specific user. 3GPP defined Power Control Dynamic Range (PCDR) to guarantee proper BS's performance. In this paper, we propose Adaptive PCDR algorithm. By APCDR algorithm, Radio Network Controller (RNC) can estimate each MS's current state using received signal to interference ratio (SIR). APCDR algorithm changes MS's maximum code channel power based on frame. By proposed scheme, each MS can reduce wireless channel effect and endure outages in cell edge. Therefore, each MS can obtain better QoS. Simulation result indicate that APCDR algorithm show more attractive output than fixed PCDR algorithm.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.6
• /
• pp.2593-2600
• /
• 2013

The main purpose of this study is to carry out the performance evaluation of Ultra-light Fixed Wing UAV(Unmanned Aerial Vehicle) photogrammetry which is being, currently, applied for various fields such as cultural assets, accident survey, military reconnaissance work, and disaster management at home and abroad. Firstly, RMSE estimation of Aerial Triangulation (AT) are within approximately 0.10 cm in position (X, Y). And through the comparison of parcel's boundary points coordinates by terrestrial surveying and by UAV photogrammetry, the analysis shows that RMSE are shifted approximately 0.174~0.205 m in X-direction, 0.294~0.298 m in Y-direction respectively. Lastly, parcel's area by orthophoto of UAV photogrammetry and by that of cadastre register has been shown the difference by 0.118 m2. The results presented in this study is just one case study of orthophoto accuracy assessment of Ultra-light fixed wing UAV photogrammetry, hereafter various researches such as AT, direct-georeferencing, flight planning, practical applications, etc. should be necessary continuously.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2006.05a
• /
• pp.1492-1496
• /
• 2006

수공구조물의 설계에 있어 가중 중요한 변수 중에 하나가 확률 강우량이다. 우리나라의 경우 매개변수적인 지점빈도해석을 통해 확률 강우량을 산정하고 있으나, 최근 들어 지점별 관측자료의 부족으로 인한 지역빈도해석을 수행하여 확률강우량을 산정하고 있는 실정이다. Index Flood 기법이나 L-moment 기법과 같은 기존의 지역빈도해석은 여러 관측 지점에서 관측된 강우자료를 이용하여 매년최대 시간강우량 자료를 추출하여 동질성 분석을 통해 이질성이 없는 것으로 분석된 연최대 강우량을 빈도해석 하여 확률 강우량을 결정한다. 그러나 이와 같은 지역빈도해석은 매개변수적 지점빈도해석과 마찬가지로 적합도 검정에 통과한 다수의 분포형이 선정되는 경우에 어떤 분포형을 사용하느냐 하는 문제점이 발생할 수 있다. 그리고 선정된 여러 강우 관측 지점의 연최대 강우량 자료에 모두 동일한 확률 분포형을 이용하므로 선정된 확률 분포형이 모든 지점의 강우 자료와 적합하지 못할 가능성을 내포하고 있으며, 또한 수문자료가 여러가지 요인으로 인하여 복합분포(mixed distribution)형태를 가질 때, 매개변수적 해석방법으로는 다중 첨두를 갖는 확률밀도함수를 해석하는데는 여러 가지 어려움이 따른다. 따라서 이러한 매개변수적 확률분포형을 이용한 빈도해석의 문제점을 해결할 수 있는 비매개변수적 빈도해석이 하나의 대안으로 제시될 수 있다. 본 연구에서는 강우자료의 선별을 통해 신뢰성 있는 자료를 구축하고, 기존의 매개변수를 갖는 확률 분포형을 이용한 지역빈도해석을 적용하여 확률 강우량을 산정하였다. 그리고 동질성분석을 통해 선정된 강우자료에 대해 비매개변수적 지역빈도해석을 적용하여 확률 강우량을 산정하고 각각의 방법에 대한 빈도해석 결과를 비교하여 확률강우량 해석에 있어 하나의 대안을 제시하고자 한다.X>${\mu}_{max,A}$는 최대암모니아 섭취률을 이용하여 구한 결과 $0.65d^{-1}$로 나타났다.EX>$60%{\sim}87%$가 수심 10m 이내에 분포하였고, 녹조강과 남조강이 우점하는 하절기에는 5m 이내에 주로 분포하였다. 취수탑 지점의 수심이 연중 $25{\sim}35m$를 유지하는 H호의 경우 간헐식 폭기장치를 가동하는 기간은 물론 그 외 기간에도 취수구의 심도를 표층 10m 이하로 유지 할 경우 전체 조류 유입량을 60% 이상 저감할 수 있을 것으로 조사되었다.심볼 및 색채 디자인 등의 작업이 수반되어야 하며, 이들을 고려한 인터넷용 GIS기본도를 신규 제작한다. 상습침수지구와 관련된 각종 GIS데이타와 각 기관이 보유하고 있는 공공정보 가운데 공간정보와 연계되어야 하는 자료를 인터넷 GIS를 이용하여 효율적으로 관리하기 위해서는 단계별 구축전략이 필요하다. 따라서 본 논문에서는 인터넷 GIS를 이용하여 상습침수구역관련 정보를 검색, 처리 및 분석할 수 있는 상습침수 구역 종합정보화 시스템을 구축토록 하였다.N, 항목에서 보 상류가 높게 나타났으나, 철거되지 않은 검전보나 안양대교보에 비해 그 차이가 크지 않은 것으로 나타났다.의 기상변화가 자발성 기흉 발생에 영향을 미친다고 추론할 수 있었다. 향후 본 연구에서 추론된 기상변화와 기흉 발생과의 인과관계를 확인하고 좀 더 구체화하기 위한 연구가 필요할 것이다.게 이루어질 수 있을 것으로 기대된다.는 초과수익률이 상승하지만, 이후로는 감소하므로, 반전거래전략을 활용하는 경우 주식투자기간은 24개월이하의 중단기가 적합함을 발견하였다. 이상의 행태적 측면과 투자성과측면의 실증결과를 통하여 한국주식시장에 있어서 시장수익률을 평균적으로 초과할 수 있는 거래전

• The KIPS Transactions:PartD
• /
• v.8D no.4
• /
• pp.313-326
• /
• 2001

The XML that was proposed as a next-generation standard for describing Web documents is widely used in various Web-based applications. In addition, XML documents on the Web link each other by hyperlinks. The current works on XML focus on the XML storage system that can efficiently store, manage, and retrieve XML documents. However, the research on the query language that supports the XML links and on the XML retrieval systems to process the XML links, is little conducted until now. In this paper, we propose an extension of an XML query language for expressing the XML link query and its processing scheme. A link query is to retrieve contents from an XML document (a query document) and from the XML documents (referenced documents) that are referred to by the links in the query document. As far as retrieving from the referenced documents is concerned, the current practice is to manually generate queries to get the partial results, and to repeat such a procedure. The purpose of link query processing in this paper is to eliminate the manual work altogether in getting the complete query result. The performance analysis shows that our link query processing strategy outperforms the conventional approach including the manual tasks. The more links to the referenced documents and the more referenced documents there are in the site storing the query document, the more query processing time decreases.

• Journal of Korean Library and Information Science Society
• /
• v.37 no.4
• /
• pp.351-370
• /
• 2006

The goal of this study was to evaluate vision, mission, strategies, and action plans from the long-term development plan for the B University's library, and specificity, measurability, achievability, relevance, and time-frame were measured and evaluated for each with SMART method. The results obtained through this study are as below : Firstly, SMART evaluation result for the B University's library was 3.80 for the vision, 3.97 for the mission, 3.74 for strategies, and 3.64 for action plans. Secondly, specificity of the long-term development plan for the B University's library was 4.06, measurability was 3.72, achievability was 3.68, relevance was 3.90, and time-frame was 3.58. Thirdly, the overall evaluation of the long-term development plan for the B University's library showed that among components from the development plan, the mission was the most superior while action plans had problems. Fourthly, in SMART evaluation factors, specificity was the most superior while time-frame had problems such that it should be supplemented in the future.

• Journal of the Mineralogical Society of Korea
• /
• v.24 no.1
• /
• pp.43-53
• /
• 2011

Health risk assessments for the abandoned asbestos mine were usually performed with activity-based sampling (ABS) method, which was not a effective tool for indexing health risk on an exact small area of mine. A newly proposed potential index of health risk (PIHR) was applied with proper spatial determination of geographical information system (GIS) to assess quantitatively health risks. A new trial was applied to a certain abandoned mine in Boryong as follows: A high grade area of PIHR was estimated 7.8% of the whole area of the mine (about 27.3 ha). Based on US EPA IRIS (integrated risk information system) model considering lifetime excess cancer risk (LECR), the health risk assessment indicated that the high grade area increased from 3.0 ha through 12.9 ha to 19.5 ha with an increase of asbestos contents in soil from 0.36% (1E-04 level) through 0.1% (3E-05 level) to 0.04% (1E-05 level). These results can be effectively applied to determine reclamation area of the abandoned asbestos mine.

• Journal of Agricultural Extension & Community Development
• /
• v.21 no.3
• /
• pp.243-269
• /
• 2014

Traditional agriculture technology is absolutely valuable not only to preserve biological diversity but construct an eco-friendly agricultural system. As the awareness of food safety has been growing, traditional technologies in the past agriculture literatures have obtained more attention sine chemical or synthesized fertilizer and agricultural pesticide were not used in these traditional agriculture ways. This study aims to evaluate development values on six kinds of agriculture literatures published before initial 1970s using Delphi technique and Correspondence analysis. The domains of assesment are include livestock sanitation, breeding management, feeding program and an extra part which 261 traditional agriculture technologies were first extracted from. From these technologies, livestock experts deducted 228 items and selected items more than 3.0 from all three areas including usefulness, scientific characteristic and economical efficiency utilizing Delphi technique.: 35 items from usefulness, 31 items from scientific characteristic, and 18 items from economical efficiency. The 23 technology items were finalized after adding five modern feasibility items recommended by experts to 18 items gaining more than 3.0 in at least three areas. The agriculture technologies were categorized into four areas where were analyzed using Correspondence analysis. The results revealed that 'sustainable farming technology', 'scientific character verification', ' modernized technology development', and 'intellectual property right' were placed closely one another except 'economy efficiency'. The result implicated that scientific verification and economy efficiency should be considered in order to sustain traditional agriculture technology into a modernized way and to protect intellectual property right of these technologies.