• Journal of the Korean Society for Nondestructive Testing
• /
• v.24 no.5
• /
• pp.525-531
• /
• 2004

In this paper, the concept of infrared thermography(IRT), the principle of measurement of IRT and how to set up the IR camera for the nondestructive testing are described in detail. Also, its utilization and non-destructive testing(NDT) diagnosis are reviewed. By performing the periodic non-touched WDT through the estimation of thermal patterns related with the temperature for the surface targeted, IRT can be applied to the early prevention of the device failure. For the diagnosis utilization, thermal imaging patterns obtained from IRT for heated blocks with internal defects were estimated through the lion-destructive method and discussed the way of IRT estimation from the analysis of characteristics between material defects and thermal imaging patterns.

• Journal of KIISE:Computer Systems and Theory
• /
• v.26 no.3
• /
• pp.291-300
• /
• 1999

멀티미디어 서비스환경에서는 수백에서 수천의 클라이언트들이 하나의 서버에 접속되기 때문에 서버 결합이 미치는 영향이 상당히 크다. 이러한 결함은 단지 서버 자체의 장애로 끝나는 것이 아니라 그로 인해 서비스 제공자들에게 유형.무형의 막대한 재산상의 피해를 가져올수 있다. 본 논문에서는 멀티미디어 서버를 구성하고 있는 자원(프로세서, 디스크, 네트워크)의 결함 발생을 고려한 큐잉 네트워크 모델을 개발하였다. 복수개의 M/M/1 큐를 큐잉 네트워크로 연결하여, 각 자원에 대한 접근 및 서비스를 모델링하였으며, 각 자원에서의 서비스 시간 지연 비율(큐의 응답시간)의 조정을 통해서, 서버 자원의 결함 발생을 고려하였다. 고객 도착률과 자원 고장률 변동에 대한 서버 자원의 이용률과 큐의 길이를 구하여 효율적인 시스템 구성 자원의 부분별 용량을 산정하였으며 , 또한 데이터 패킷 응답 시간 분포 및 고장률 변화에 따른 시스템의 신뢰도 수준을 계산하였다. 이와 같은 서비스 시스템 성능에 관련된 파라미터 분석을 통하여 멀티미디어 데이터 서비스 수준 (Quality of Service)에 중요한 영향을 미치는 서버 설계 요소를 파악하였고, 시뮬레이터 패키지를 활용한 모의 실험을 통하여 개발된 큐잉 네트워크 모델의 정확성을 검증하였다.

• Proceedings of the Korean Information Science Society Conference
• /
• 2002.10e
• /
• pp.331-333
• /
• 2002

신뢰성 높은 이동 에이전트 시스템을 구성하는데 있어서 지속적인 이동 에이전트 연산을 보장하는 결함 포용기법은 중요한 고려사항이다. 이를 위해 많은 연구들이 단계군 구성에 기반한 이동 에이전트 수행에 대한 결함 포용 기법들을 제안하고 있다. 그러나 제안된 기법들은 단계군을 구성함으로써 에이전트 연산 실행에 대한 봉쇄 가능성을 감소시켰으나, 에이전트를 이주시키는 통신비용과 단계군 작업들에 대한 부하를 증가시켰다. 본 논문에서는 단계군내에 지역(region)적으로 다르게 분포한 실행장소(place)에 대해서 가짜 참여자(quasi-participant)를 두어 지역적으로 같은 곳에 모이게 하는 새로운 단계군 구성기법을 제안한다. 또한, 가짜 참여자와 실제 실행장소를 하나의 단계군으로 구성하기 위해 단계군내에 하위단계군(substage)을 두어 단계군을 구성하는 기법을 제안한다. 하위단계군은 가짜 참여자와 실제 실행장소의 작업을 분리하여 가짜 참여자로 인해 발생할 수 있는 추가 통신비용을 감소시킨다. 본 논문에서 제안하는 가짜 참여자와 하위단계군을 사용한 단계군 구성기법은 고장 자유(failure-free) 상태에서 단계군 작업들에 대한 수행시간을 단축시켜 단계군을 이용하여 결함을 포용하는 이동 에이전트의 전체 수행시간을 단축시킨다.

• Journal of the Society of Naval Architects of Korea
• /
• v.29 no.2
• /
• pp.103-114
• /
• 1992

A study result of buckling reliability is presented for the axially compressed imperfect elastic cylinder. Multi-mode analysis program is developed from Karman-Donnell Equation for the calculation of the buckling load of the cylindrical she1l. Geometric intial imperfection is approximated by double Fourier series of which coefficients are assumed random variables with jointly normal distribution characteristics. Crude Monte Carlo simulation technique is used to calculate the probabilistic failure properties of several cases with various imperfection Conditions.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.19 no.6
• /
• pp.743-748
• /
• 2009

In this paper, we propose an effective method to extract background components in automated vision inspection system for polarized film used in TFT LCD display panels. The test image signals are typically composed of three components such as ununiform background, random noises and target defect signals. It is important to analyze the background signal for accurate extraction of defect components. Two dimensional continuous wavelets with first derivative gaussian is used. This methods can be applied for reliable extraction of defect signal by elimination of the background signal from the original image. The proposed method outperforms over conventional FFT methods.

• Proceedings of the Korea Multimedia Society Conference
• /
• 2001.11a
• /
• pp.115-120
• /
• 2001

본 논문에서는 비닐 튜브의 결함검사에 이용하기 위한 이진화 임계치의 자동 결정방법과 패턴매칭에 이용되는 패턴 모델의 자동 친정방법에 대하여 기술한다. 256 Gray 영상을 받아 들여 이진화 임계치를 결성하기 위해서, 휘도치 분포 곡선에서 2개의 극대값을 찾고, 두 극대 위치의 중간위치를 이진화 임계치로 결정하는 방법을 이용하였다. 그리고 패턴 모델을 생성하기 위하여는 수직, 수평 방향의 누적함(Profile)을 이용하였다. 이 방법은 인쇄물 검사 시스템뿐 아니라 비슷한 휘도치 분포를 같는 반도체 자동 검사 시스템을 비롯한 일반적인 건사 시스템에 적용이 가능하다.

• Journal of the Korean Magnetics Society
• /
• v.12 no.5
• /
• pp.174-178
• /
• 2002

Ac magnetic field was changed in the vicinity of a flaw because of the distribution of eddy current within a conductor, when the magnetic field was applied to a conductor having a flaw. The flaw detection was performed by using Co-based amorphous wire sensor head. The wire has almost 0 magneto-striction and high permeability. An comparative uniform magnetic field was applied to a 1㎜ thick copper plate and a 25㎛ thick aluminum sheet conductor using spiral typed coil. The size of the coil has 40㎜$\times$40㎜ outer width and 8㎜$\times$8㎜ inner width. The copper plate and the aluminum sheet has 0.5㎜ and 0.1㎜ wide gap, respectively. The frequency range of applied field was 100㎑∼600㎑. The induced voltage difference of 2.5㎷ was obtained in the maximum voltage and minimum one measured across the gap of the 1mm thick conductor. In the case of aluminum sheet, 0.4㎷ was obtained. From this results, the effectiveness of Co-based amorphous wire was confirmed in the ECT technique.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.41 no.5
• /
• pp.337-343
• /
• 2017

As a shop practice, a strength estimation method for die cast parts is suggested, in which various defects such as pores can be allowed. The equivalent porosity is evaluated by combining the stiffness data from a simple elastic test at the part level during the shop practice and the theoretical stiffness data, which are defect free. A porosity equation is derived from Eshelby's inclusion theory. Then, using the Mori-Tanaka method, the porosity value is used to draw a stress-strain curve for the porous material. In this paper, the Hollomon equation is used to capture the strain hardening effect. This stress-strain curve can be used to estimate the strength of a die cast part with porous defects. An elastoplastic theoretical solution is derived for the three-point bending of a die cast beam by using the plastic hinge method as a reference solution for a part with porous defects.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.15 no.1
• /
• pp.291-298
• /
• 1995

An ultrasonic testing uses the directivity of the ultrasonic wave which propagates in one direction. The directivity is expressed as the relationship between the propagate direction and its sound pressure. This paper studied the directivity of shear waves emitted from angle probes and scattered from surface defects by using visualization method. These experimental results were compared with the theory which was based on the continuous wave. The applicability of continuous wave theory was discussed in terms of the parameter $d/{\lambda}$; where d is transducer or defect size and ${\lambda}$ is the wavelength. In the case of angle probes, the experimental results show good agreement with theoretical directivity on the principal lobe. When defect size was smaller than the wavelengths, clear directivity in the reflected wave was observed. In the case of the same ratio of defect size to wavelength, the directivity of reflected waves from the defect show almost the same directivity in spite of frequency differences. When the $d/{\lambda}$ is greater than 1.5, measured directivities almost agreed with the theoretical one.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.1
• /
• pp.7-14
• /
• 2006

The finite failure NHPP models proposed in the literature exhibit either constant, monotonic increasing or monotonic decreasing failure occurrence rates per fault. In this paper, we propose the Erlang reliability model, which can capture the increasing nature of the failure occurrence rate per fault. Equations to estimate the parameters of the Erlang finite failure NHPP model based on failure data collected in the form of inter-failure times are developed. For the sake of proposing shape parameter of the Erlang distribution, we used to the goodness-of-fit test of distribution. Data set, where the underlying failure process could not be adequately described by the existing models, which motivated the development of the Erlang model. Analysis of the failure data set which led us to the Erlang model, using arithmetic and Laplace trend tests, goodness-of-fit test, bias tests is presented.