• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.17 no.2
• /
• pp.82-89
• /
• 2007

Glass-ceramics were fabricated by heat-treating a glass at $700^{\circ}C$/10hr which was obtained by melting a glass frit mixed with $40{\sim}80 wt%$ EAF dust at $1300^{\circ}C$/1hr. Dependence of crystal phase and bonding state change upon a compositional change and heat treatment condition were studied and the results was connected to the toxic characterization leaching procedure (TCLP) test data to investigate a chemical durability of the specimens. Increasing dust in a glass shifted the peak around $1000cm^{-1}$ to the lower frequency which was composed of two vibration peaks for the nonbridging oxygen at $960cm^{-1}$ and the bridging oxygen at $1050{\sim}1060cm^{-1}$. Also, the $B_2O_3$ structure of boroxol ring changed to a tetrhedral-, trigonal- and di-borate with dust addition. The Fe-O peaks in the glass-ceramics were observed which is consitent with XRD results of spinel formation. The surface of glass after TCLP test was severely cracked while there was no cracks on a glass-ceramics after TCLP test so the chemical durability of the glass-ceramics is superior than that of glass. The leaching concentration of Fe for the glass-ceramics containing EAF dust 80 wt% is 1/15 times lower than that of glass. The Zn leaching concentration fur the glass-ceramics containing dust < 70 wt% was higher than that of glass but its trend was reversed for the specimen of dust content > 80 wt% which could be concluded as correlated with occurrence of willemite phase.

• Journal of the Korean Ceramic Society
• /
• v.39 no.6
• /
• pp.558-565
• /
• 2002

Coal fly ash, produced from a power plant in Korea was used for the production of glass-ceramics and the physical properties of glass-ceramics were evaluated. CaO and TiO$_2$ were added into the fly ash during the melting process to reduce the viscosity of molten glass and to induce internal crystallization of glass, respectively. Glass-ceramic was produced through a single stage heat treatment (at 950∼1050$\^{C}$ for 37∼240 min) after preparing glass (iota fly ash powder. As a result, a new tiny rod type crystals (a=7.4480, b=10.7381, c=4.3940 A, $\alpha$=94.9, $\beta$=98.6, γ=108.5°) was found in the glass-ceramics, which showed attractive mechanical properties, high hardness (7.1∼7.6 GPa) and wear resistance (by erosion test). Thus a glass-ceramic produced from thermal power plant fly ash and cell as a source for CaO exhibits a suitable treatment for the recycling and exploitation of waste materials and would be acceptable for a new application far building materials.

• Journal of the Korean Ceramic Society
• /
• v.35 no.2
• /
• pp.151-162
• /
• 1998

ZnO-BaO-$SiO_2-Al_2O_3$계 유리 및 결정화 유리 시편들을 제조하여 평판형 고체산화물 연료전지 봉착재로의 이용가능성을 조사하였다 구성층과 일치되는 열팽창 계수 및 화학적 안정성을 봉착재로의 적용에 있어 판단 기준으로 정하였다 실험된 다양한 조성의 유리 및 결정화 유리 시편들중 7.79ZnO-58.52BaO-$28.69SiO_2-5Al_2O_3$(ZBS3-A5) 결정화 유리의 측정된 열팽창 계수값은 $11.02\times10^{-6/^{\circ}C}$로써 YSZ 및 LSC의 평균 열팽창 계수 값과의 차이가 $0.07\timestimes10^{-6/^{\circ}C}$로 매우 작아 봉착시 열응력 발생의 최소화를 기대할수 있었다 이런 ZBS3-A5+LSC 접합 couple의 경우는 ZnCr2O4 의 dis-crete한 입자가 결정화 유리 부위에 형성되었고 역시 시간의 증가에 따라 이러한 입자의 성장은 없었다 특히 ZBS3-A5 구성 성분인 Ba, Zn, Sil 그리고 Al의 YSZ 및 LSC로의 확산은 없어 봉착후에 YSZ 및 LSC의 전기적 특성에 악영향을 미치지 않으리라 판단되었다.

• Proceedings of the International Microelectronics And Packaging Society Conference
• /
• 2002.11a
• /
• pp.59-63
• /
• 2002

Zinc-Magnesium borosilicate 유리에 CaF$_2$입자를 충진재로 첨가하여 혼합체의 소결거동, 결정화 거동 및 최종 소결체의 마이크로파 유전특성을 측정하였다. CaF$_2$첨가는 유리의 점도를 감소 시켜 결정화 및 수축개시온도를 감소시켰다. 이러한 CaF$_2$의 최대 첨가량은 주어진 유리조성에 있어서 15 vol. % 이었다. 이러한 소결성 및 결정화 개시온도의 변화는 모 유리와 CaF$_2$의 반응에 의한 결과로 보여지며 이 반응은 결정상의 변화나 이차상의 형성에는 영향을 미치지 않았다. 따라서 유전율 6.1에 품질계수가 40000GHz 인 CaF$_2$입자를 15 vol.% 첨가시 유전상수는 7.1에서 5.6로 품질계수는 2200에서 5000GHz로 유전특성이 향상되었고 소결온도는 75$0^{\circ}C$이었다.

• Journal of the Korean Ceramic Society
• /
• v.38 no.12
• /
• pp.1137-1143
• /
• 2001

In this study, glass-ceramics containing cordierite(2MgO$.$2Al$_2$O$_3$5SiO$_2$) as a major crystalline phase was prepared from MAS (MgO-Al$_2$O$_3$-SiO$_2$) glass system for the application to reflector. Glasses prepared with addition of TiO$_2$as a nucleating agent were crystallized by two-step heat treatment of nucleation and crystal growth. Then nucleation and crystal growth behavior were investigated and the influence of heat treatment schedule on the nature of crystal phases and the diffuse reflectance spectrum was investigated. As a result, cordierite and rutile were precipitated as a major crystalline phases for the glass-ceramics with the nucleation at 750$^{\circ}C$ for 3 hours and then crystallization at 1100$^{\circ}C$ for 5 hours, and this glass-ceramics showed the reflectance over 90% in 570∼2500nm specturm region.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.31 no.2
• /
• pp.84-88
• /
• 2021

The change of the photoluminescence properties of La2O3-CaF2-Al2O3-SiO2 glass-ceramics doped with rare earth material, that is used as laser and optical sensors, was analyzed according to heat treatment temperature. The heat treatment conditions for fabricating glass-ceramics were obtained through non-isothermal thermal analysis, and X-ray diffraction analysis was performed to determine the degree of crystal growth and kinds of crystal phases generated according to the heat treatment temperature. Using Scherrer's equation, it was predicted that crystals with a size of 25~40 nm would be generated inside the glass-ceramics. Photoluminescence (PL) analysis showed that the specimens heat-treated at 660℃ to 670℃ for 1 hour had the highest PL intensity. Also, from the CIE color coordinate analysis, all glass-ceramics specimens emitted red-orange light regardless of the heat treatment condition.

• Journal of the Korean Ceramic Society
• /
• v.39 no.5
• /
• pp.490-497
• /
• 2002

Sintering property, mechanical property and bioactivity of $CaO-SiO_2-B_2O_3$ glass-ceramics were investigated. This glass-ceramics was sintered at 750-830${\circ}$ and showed nearly pore-free microstructure. The glass-ceramics consisted of three phases, i.e. monclinic-wollastonite, calcium borate and borosilicate glass matrix. The mechanical strength was higher than that of other bioactive ceramics, especially compressive strength(2813 MPa) and fracture toughness($3.12 MPa{\cdot}m^{1/2}$). Bioactivity of the glass-ceramics depends on amount of $CaB_2O_4$ and borosilicate glass matrix. It might be likely that more soluble $CaB_2O_4$ raises supersaturation of Ca ion in SBF solution and borosilicate glass forms Si-OH group that presents nucleation site of hydroxycarbonate apatite(HCA) layer. So, glassceramics of more $CaB_2O_4$ and borosilicate glass showed better bioactivity.

• Korean Journal of Materials Research
• /
• v.6 no.4
• /
• pp.364-371
• /
• 1996

본 연구는 이온교환에 의한 Li2O-AI2O3 계 결정화유리의 강화에 관한 연구이다. 모유리의 이온교환 전후의 강도를 비교하였으며, 결정화유리의 결정화전후에 이온교환에 따르는 강도를 상호 비교하였다. 그 결과 모유리의 Na+이온교환에 따른 최대 강도값은 45$0^{\circ}C$-3hr의 열처리 조건하에서 최고 6배(60Kg/mm2)의 강도값을 나타내었으며, 결정화후 이온교환에 따른 강도증가는 45$0^{\circ}C$-1hr의 열처리 조건하에서 최고 10배의 강도증대효과를 보였다. 한편 과도한 이온교환 열처리조건하에서는 응력이완현상을 나타냄을 알 수 있었다.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.1 no.2
• /
• pp.94-103
• /
• 1991

ZnO-$P_2O_5$ system glasses containing 45 to 60 mol% ZnO have been melted at$1200^{\circ}C$and crystallized through controlled heat treatment. The properties of the base glass and crystallized glass were examined with XRD. FTIR. density. thermal expansion, electric conductivity, hardness. The principal crystalline phase was identified as zinc metaphosphate [$Zn(PO_3)_2$ in crystallized glasses containing 45-55mol% ZnO and zinc pyrophosphate ($Zn_2P_2O_7$) in the sample of 60mol% ZnO with X - ray diffraction analysis. Thermal expansion coefficient and DC electrical conductivity were varied with direction of oriented crystalline in the samples containing 50-60mol% ZnO. This suggests the existance of the oriented crystalline.

• Proceedings of the International Microelectronics And Packaging Society Conference
• /
• 2002.11a
• /
• pp.97-99
• /
• 2002

유리내부에 수십나노크기의 Ag 금속입자를 생성시키기 위한 연구를 진행하였다. 본 연구에서는 규산염계 유리에 Ag와 Ce을 첨가하여 환원분위기에서 유리를 제조함으로서 Ce$^{3+}$ 를 유리내에 생성시킬 수 있었으며, 또한 레이저조사(irradiation)를 통하여 Ag+이온의 금속입자 환원을 도울 수 있었다. 또한 레이저 조사시간에 따른 금속입자의 변화를 관찰하고자 하였으며, 이와 같은 과정으로 생성된 금속입자함유 유리를 열처리함으로서 나타나는 열적특성을 평가하여 금속입자가 결정화과정에 미치는 영향을 평가하고자 하였다. 유리내에 존재하는 나노금속입자를 투과전자현미경 (TEM)을 통하여 확인하였으며, 시차주사열량분석법(DSC)을 통해 유리의 결정화거동을 평가하였다. 또한 Photo Luminescence 측정을 통한 유리내부의 Ce이온의 전자상태를 관찰하였다.