• Journal of the Korea institute for structural maintenance and inspection
• /
• v.15 no.5
• /
• pp.124-135
• /
• 2011

The capacity of bearings installed at abutments and piers for continuous bridges is usually determined by the magnitude of the maximum vertical reaction at each support and the capacity of bearings placed at piers is higher than that at abutments. In this study, the possibility of the improved seismic performance of base-isolated continuous skew bridges was investigated by analysing the variation of the seismic behavior of them according to three arrangements of bearings. Based on the conventional arrangement of bearings(Case A), three arrangements of bearings such as Case A, Case B and Case C were selected considering the variation of the horizontal stiffness of the lead rubber bearing(LRB) installed at the pier. The seismic behavior of the total 36 skew bridges was investigated by conducting the response spectrum analysis using the hybrid response spectrum considered the effect of LRB's damping. Results of analyses show that a more desirable seismic behavior of base-isolated continuous skew bridges can be obtained by reducing the magnitude of the horizontal stiffness of LRB placed at the pier to similar to or less than that of LRB installed at abutments. The variation of LRB's stiffness at the pier brings about period elongation and the change of mode shapes of base-isolated skew bridges and results in the reduction of the total base shear, the maximum base shear at the pier and the girder stresses. Although positive effects on the seismic behavior of base-isolated skew bridges caused by the change of arrangement of bearings decreased slighty with an increase in the flexibility of the substructure, the proposed arrangements of bearings bring about the improved seismic performance of base-isolated continuous skew plate girder bridges with less than 10m height of piers.

• Korean Journal of Food Science and Technology
• /
• v.35 no.5
• /
• pp.884-892
• /
• 2003

This study was conducted to optimize the water homogenization process of mandarin orange peel for colored rice. Four variables were used to determine the optimum conditions for homogenization speed, time, temperature, and water volume with a five level central composite design and response surface methodology. The process was optimized using the combination of EI and b values of rice coated with water extract of the mandarin orange peel. The effect of water volume was the most significant compared to the other variables on the quality of water homogenate. The regression polynomial model was a suitable (p>0.05) model by lack-of-fit analysis showing high significance. To optimize the process, based on surface response and contour plots, individual contour plots for the response variables were superimposed. The optimum conditions for manufacturing water extract from mandarin orange was with 8,500 rpm homogenization speed, 2.8 min time, $53^{\circ}C$ temperature, and 42 mL water volume with the maximum of restricted variables of EI above 400 and h value above 24.

• Korean Chemical Engineering Research
• /
• v.43 no.1
• /
• pp.110-117
• /
• 2005

In this work, solid-state inclusion complex powders of itraconazole and $2-hydroxypropyl-{\beta}-cyclodextrin(HP-{\beta}-CD)$ were produced by a supercritical anti-solvent (SAS) process. In order to evaluate the degree of complexation, the thermal behavior of the microparticulate complexes was investigated using differential scanning calorimetry. The experimental results obtained for the solubility and dissolution rate of the microparticulate inclusion complexes in a buffer solution of pH 1.2 showed that the complexation of itraconazole with $HP-{\beta}-CD$ results in a significant increase in the solubility and dissolution rate of itraconazole. The particle size of the SAS-produced inclusion complexes was dramatically reduced ($<0.1-0.5{\mu}m$) compared with untreated itraconazole ($30-50{\mu}m$) and $HP-{\beta}-CD$ ($50-100{\mu}m$). The solubility of itraconazole was increased with the increase of pressure at a constant temperature to ca. $758.6{\mu}g/mL$ in an aqueous medium of pH 1.2. The dissolution rate of itraconazole was observed to be significantly improved and about 90% of itraconazole was found to be dissolved within 5-10 min.

• Journal of the Korean GEO-environmental Society
• /
• v.9 no.5
• /
• pp.5-13
• /
• 2008

In this study, It was carried out to evaluate the feasibility of recycled crushed concrete as aggregate used cement mortar replace sand and to investigate engineering properties of recycled aggregate for hazardous waste solidification. The compressive strength of cement mortar replaced 5-15% (wt.) recycled aggregate was over $163kgf/cm^2$ which is the standard of first grade concrete block class C. And cement mortar was examined to evaluate the stability by leaching test. Cu, Cd, Pb, Cr, and As as the heavy metals were proved very stable but mercury (Hg) was leached high concentration because it was simply tied to the cement surface. We investigated the crystal structures of cement mortar and they had shown the peaks of $Ca(OH)_2$, ettringite, and CSH (calcium silicate hydrate). As the result, the longer curing time, the higher CSH peak that means to increase compressive strength and the cement mortar was more stable. Therefore it was shown that it may be possible to apply hazardous waste solidification using recycled aggregate, fly ash and sewage sludge ash.

• The Korean Journal of Food And Nutrition
• /
• v.17 no.1
• /
• pp.47-52
• /
• 2004

In this study, I attempted to develope the expression and purification system of human mammaglobin proteins in Escherichia coli and to produce anti-human mammaglobin rabbit antibody for the detection of human mammaglobin protein in the peripheral blood of breast cancer patients. Human mammaglobin gene was cloned and sequenced from m-RNAs purified from donated breast cancer tissues using RT-PCR. The cloned gene was inserted into pET30, pET22, and pET32 plasmid. The cloned gene in pET30 yields insoluble proteins which was difficult to purify from the cells extracts. The mammaglobin gene in pET32 was strongly expressed soluble proteins which were isolated using Ni-NTA affinity chromagraphy and DEAE-ion exchange chromatography, followed by enterokinase digestion of the purified proteins. The isolated proteins had enough purity to use as a antigen for the production of anti-mammaglobin antibody in rabbits. The polyclonal antibody produced against the isolated mammaglobin showed a specificity to mammaglobin after Westernblot immuno assay. In conclusion, the isolated mammaglobin protein and the anti-mammaglobin rabbit antibody may be used for diagnosis of breast cancer as well as development of anti-breast cancer drug.

• The Journal of the Acoustical Society of Korea
• /
• v.39 no.5
• /
• pp.379-389
• /
• 2020

In this study, the flow and noise performances of high-speed fan motor unit for cordless vacuum cleaner is improved by optimizing the impeller which drives the suction air through flow passage of the cordless vacuum cleaner. Firstly, the unsteady incompressible Reynolds averaged Navier-Stokes (RANS) equations are solved to investigate the flow through the fan motor unit using the computational fluid dynamics techniques. Based on flow field results, the Ffowcs-Williams and Hawkings (FW-H) integral equation is used to predict flow noise radiated from the impeller. Predicted results are compared to the measured ones, which confirms the validity of the numerical method used. It is found that the strong vortex is formed around the mid-chord region of the main blades where the blade curvature change rapidly. Given that vortex acts as a loss for flow and a noise source for noise, impeller blade is redesigned to suppress the identified vortex. The response surface method using two factors is employed to determine the optimum inlet and outlet sweep angles for maximum flow rate and minimum noise. Further analysis of finally selected design confirms the improved flow and noise performance.

• Korea journal of population studies
• /
• v.26 no.2
• /
• pp.197-219
• /
• 2003

Using the panel data from the National Longitudinal Survey of Youth 79, we test the effects of relative status inconsistency within American young couples on the direction of migration as well as on migration propensities. Key findings in this study indicate that only couples in which the wife's education is greater than the husband's education are less likely to migrate than couples for which the wife's status is as lower than the husband's. There are no differences in the propensity for rural couples to migrate to urban counties or for urban couples to migrate to rural counties based on status inconsistency between spouses. However, we find that there is the gendered difference in the effect of status inconsistency on the probability of family migration. A spouse's higher status has an impact on a wife's probability of migration but does not affect a husband's migration propensity in a comparable situation. These findings are most consistent with a gender role perspective on migration since increases in the wife's status have little effect on family migration, once the presence and age of children is controlled.

• Clean Technology
• /
• v.19 no.4
• /
• pp.401-409
• /
• 2013

BBiodegradable polymers have attracted great attention because of the increased environmental pollution by waste plastics. In this study, PLA (polylactic acid)/Clay-20 (Cloisite 20) and PLA (polylactic acid)/PBS (poly(butylene succinate)/Clay-20 (Cloisite 20) nanocomposites were manufactured in a twin-screw extruder. Specimens for mechanical properties of PLA/Clay-20 and PLA/PBS (90/10)/Clay-20 nanocomposites were prepared by injection molding. Thermal, mechanical, morphological and raman spectral properties of two nanocomposites were investigated by differential scanning calorimetry (DSC), tensile tester, scanning electron microscopy (SEM) and raman-microscope spectrophotometer, respectively. In addition, hydrolytic degradation properties of two nanocomposites were investigated by hydrolytic degradation test. It was confirmed that the crystallinity of PLA/Clay-20 and PLA/PBS/Clay-20 nanocomposite was increased with increasing Clay-20 content and the Clay-20 is miscible with PLA and PLA/PBS resin from DSC and SEM results. Tensile strength of two nanocomposites was decreased, but thier elongation, impact strength, tensile modulus and flexural modulus were increased with an increase of Clay-20 content. The impact strength of PLA/Clay-20 and PLA/PBS/Clay-20 nanocomposites with 5 wt% of Clay-20 content was increased above twice than that of pure PLA and PLA/PBS (90/10). The hydrolytic degradation rate of PLA/Clay-20 nanocomposite with 3 wt% of Clay-20 content was accelerated about twice than that of pure PLA. The reason is that degradation may occur in the PLA and Clay-20 interface easily because of hydrophilic property of organic Clay-20. It was confirmed that a proper amount of Clay-20 can improve the mechanical properties of PLA and can control biodegradable property of PLA.

• 보존과학연구
• /
• s.36
• /
• pp.11-32
• /
• 2015

The purpose of this study is to analyse the properties of natural mineral pigments used in restoration and conservation of cultural assets. For this study blue-based pigments that are sold in market were selected. The component analysis using by XRF and XRD shows that blue pigment consist of Azurite. And each specimens were evaluated particle size, chromaticity, specific gravity and oil-absorption according to rating system of pigments particle size. Results show that the value of L* increase with the decrease in particle size. The results suggest that the physical properties which is specific gravity, oil-absorption and chromaticity depend on the particle sizes of pigments. When it comes to particle size of pigments decreased by increasing the number of rating system. In addition, the chromaticity related to particle size. The result from this study expects to be used as useful referencing data for conservation and restoration of cultural heritage and understanding phenomena of the properties according to various particle size of Seokcheong pigment.

• Polymer(Korea)
• /
• v.30 no.6
• /
• pp.464-470
• /
• 2006

Diblock copolymers consisting of methoxy Poly (ethylene glycol) (MPEG) and poly (${\epsilon}-ca$ prolactone) (PCL), poly(${\delta}-valerolactone$) (PVL), poly(L-lactide) (PLLA), or poly(L-lactide-co-glycolide) (PLGA) were prepared to compare the characterization of diblock copolymers as a drug carrier. MPEG-PCL, MPEG-PVL, MPEG-PLLA, and MPEG-PLGA diblock copolymers were synthesized by the ring-opening polymerization of ${\epsilon}$-caprolactone or ${\delta}$-valerolactone in the presence of $HCl{\cdot}Et_2O$ as a monomer activator at room temperature and by the ring-opening polymerization of L-lactide or a mixture of L-lactide and glycolide in the presence of stannous octoate at $130^{\circ}C$, respectively. The synthesized diblock copolymers were characterized with $^1H-NMR$, GPC, DSC, and XRD. The micellar characterization of MPEG-polyester diblock copolymers in an aqueous phase was carried out by using NMR, dynamic light scattering, AFM, and fluorescence techniques. Most micelles exhibited a spherical shape in AFM. Thus, ore confirmed that the micelles formed with MPEG-polyester diblock copolymers have possibility as a potential hydrophobic drug delivery vehicle because a hydrophobic drug could be preferentially distributed in the micelle core.