• Korean Journal of Construction Engineering and Management
• /
• v.19 no.3
• /
• pp.43-51
• /
• 2018

Facility Management (FM) phase in building lifecycle management is the most crucial phase concerning building value and life cycle cost management. Nevertheless, systematic and rational FM process is not yet constructed, leading to failure of facility value and cost management from accurate and proactive FM. This is because there has been minimal approach regarding construction of optimal FM process based on rational FM data analysis. The purpose of this study is to provide optimal FM process with quantitative FM data analysis method using spatial data. This study investigated existing FM data structure and derive the limitation of it from both expert interview and practical FM material analysis. As a solution for this limitation, this study provided optimal FM process with MTBF (Mean Time Between Failure), which is quantitative FM data analysis method. The effect of the provided process was validated with a case study. It is expected that this process allows rational and objective FM data analysis, resulting in accurate and proactive FM. And it is expected that it can be used as a useful basic data for developing an effective system for the FM process.

• Journal of the Society of Disaster Information
• /
• v.15 no.4
• /
• pp.524-530
• /
• 2019

Purpose: In this paper, we construct a detailed three-dimensional interface element using a three-dimensional analysis program, and evaluate the composite behavior stability of the connector by applying physical properties such as the characteristics of general members and those of reinforced members Method: The analytical model uses solid elements, including non-linear material behavior, to complete the modeling of beam structures, circular flanges, bolting systems, etc. to the same dimensions as the design drawing, with each member assembled into one composite behavior linkage. In order to more effectively control the uniformity and mesh generation of other element type contact surfaces, the partitioning was performed. Modeled with 50 carbon steel materials. Results: It shows the displacement, deformation, and stress state of each load stage by the contact adjoining part, load loading part, fixed end part, and vulnerable anticipated part by member, and after displacement, deformation, The effect of the stress distribution was verified and the validity of the design was verified. Conclusion: Therefore, if the design support of the micro pile is determined based on this result, it is possible to identify the Vulnerable Parts of the composite behavior connector and the degree of reinforcement.

• Restorative Dentistry and Endodontics
• /
• v.33 no.5
• /
• pp.435-442
• /
• 2008

Type II root canal was defined that two canals leave the chamber and merge to form a single canal at short of the apex. The aim of this study was to analyse the master apical file (MAF) size according to various instrumentation techniques in the type II root canal when each canal was enlarged to working length. Eighty mesial roots of molar with ISO #15 initial apical file (IAF) size in type II root canals were randomly divided into four experimental groups with 20 teeth each. According to enlarging instruments, four groups are: K-$FLEXOFILE^{(R)}$ (KF), engine-driven Ni-Ti $P_{RO}T_{APER}{^{(R)}}$ (PT), HERO $Shaper^{(R)}$ (HS), $K^{3\;TM}$ (K3). All canals were enlarged to each working length with ISO #30 size: #30 in KF, F3 in PT, .04/30 in HS, and .06/30 in K3. The master apical file (MAF) size was confirmed by tactile sensation and universal test- ing machine (EZ test, Shimadzu Co., Kyoto, Japan). The mean MAF size was statistically compared using one-way ANOVA and Tukey HSD test at the 0.05 probability level. These results show that the MAF size was appeared one or two sizes larger than the final enlarging instrument when all canal in type II configuration were enlarged to each working length. Therefore, the clinician have to confirm the apical stop once more after instrumentation of type II root canal.

• Journal of Korea Water Resources Association
• /
• v.46 no.5
• /
• pp.519-530
• /
• 2013

To provide a reliable tool for runoff simulations of ungauged watersheds upstream of reservoirs, a daily runoff simulation model, Tank model, is restructured, the parameter regionalization of the model is conducted, and the model's applicability is evaluated. Taking into account the characteristics of runoffs from the watersheds, a three-tank model is employed. The percolation process of the model's third tank is eliminated, considering the water budgets of the watersheds, and its evapotranspiration component is improved, reflecting the conditions of meteorological observation in South Korea. The sensitivity analysis of the model shows that the model's behaviors, varying with a sensitive parameter, ${\alpha}$, are reasonable. The regional parameter estimation equations are determined, using the characteristics and land uses of the watersheds as variables. The model is applied for the runoff simulations of three watersheds and the water stage simulation of one reservoir, and the simulation results are then compared with the observed values, which prove to be in close agreement with the observations. In addition, the results from simulating inflows of twenty-four reservoirs using the model show that the averages of evapotranspiration rate and runoff rate are 42.8% and 56.6%, respectively, which are resonable. Consequently, it is concluded that the model is practically applicable to simulating runoffs from watersheds upstream of reservoirs, and simulated inflow data are useful for watershed management and reservoir planning, design, and operation.

• Journal of Korea Water Resources Association
• /
• v.50 no.3
• /
• pp.191-200
• /
• 2017

A robust parameter set (ROPS) selection framework for an unsteady flow model was developed by combining Pareto optimums obtained by outcomes of model calibration using multi-site observations with the minimax regret approach (MRA). The multi-site calibration problem which is a multi-objective problem was solved by using an aggregation approach which aggregates the weighted criteria related to different sites into one measure, and then performs a large number of individual optimization runs with different weight combinations to obtain Pareto solutions. Roughness parameter structure which can describe the variation of Manning's n with discharges and sub-reaches was proposed and the related coefficients were optimized as model parameters. By applying the MRA which is a decision criterion, the Pareto solutions were ranked based on the obtained regrets related to each Pareto solution, and the top-rated one due to the lowest aggregated regrets of both calibration and validation was determined as the only ROPS. It was found that the determination of variable roughness and the corresponding standardized RMSEs at the two gauging stations varies considerably depending on the combinations of weights on the two sites. This method can provide the robust parameter set for the multi-site calibration problems in hydrologic and hydraulic models.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.10
• /
• pp.696-701
• /
• 2016

Multi-stage deep drawing is a widely used industrial manufacturing process, and its applications are gradually expanding to both small products and large metallic products. The USB C-type socket used in smart phones, for example, is manufactured using oval multi-stage deep drawing. The socket is very small and slender and it requires precise manufacturing. The thickness distribution of the final product is guaranteed only if it is uniform throughout the overall process. Therefore, minimizing the height difference between long and short sidewalls after the first operation is important for this goal. An initial blank optimization was performed for an oval-type drawing process based on finite element simulations. The goal was to determine an initial blank geometry that can maintain uniform height and thickness after the first draw operation. The initial blank shape of the sheet metal was optimized, and the results show that it satisfied the conditions of minimal thickness reduction and even thickness distribution. The geometry from the optimized simulation was compared with experimental results, which showed good agreement.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.18 no.1
• /
• pp.156-169
• /
• 2015

This study was to evaluate the RCP climate change impact on hydrological components in the Imha-Dam watershed using SWAT(Soil and Water Assessment Tool) Model. The model was calibrated for six year(2002~2007) and validated for six year(2008~2013) using daily observed streamflow data at three watershed stations. The overall simulation results for the total released volume at this point appear reasonable by showing that coefficient of determination($R^2$) were 0.70~0.85 and Nash-Sutcliffe model efficiency(NSE) were 0.67-0.82 for streamflow, respectively. For future hydrologic evaluation, the HadGEM3-RA climate data by scenarios of Representative Concentration Pathway(RCP) 4.5 and 8.5 of the Korea Meteorological Administration were adopted. The biased future data were corrected using 34 years(1980~2013, baseline period) of weather data. Precipitation and temperature showed increase of 10.8% and 4.9%, respectively based on the baseline data. The impacts of future climate change on the evapotranspiration, soil moisture, surface runoff, lateral flow, return flow and streamflow showed changes of +11.2%, +1.9%, +10.0%, +12.1%, +18.2%, and +11.2%, respectively.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.11 no.4
• /
• pp.51-62
• /
• 2012

According to the Lighthill and Whitham's shock wave model, a shock wave exists even in a homogeneous speed condition. They referred this wave as unobservable- analogous to a radio wave that cannot be seen. Recent research has attempted to identify how such a counterintuitive conclusion results from the Lighthill and Whitham's shock wave model, and derive a new asymptotical shock wave model. The asymptotical model showed that the shock wave in a homogenous speed traffic stream is identical to the ambient vehicle speed. Thus, no radio wave-like shock wave exists. However, performance tests of the asymptotical model using numerical values have not yet been performed. We investigated the new asymptotical model by examining the implications of the new model, and tested it using numerical values based on a test scenario. Our investigation showed that the only difference between both models is in the third term of the equations, and that this difference has a crucial role in the model output. Incorporation of model parameter${\alpha}$ is another distinctive feature of the asymptotical model. This parameter makes the asymptotical model more flexible. In addition, due to various choices of ${\alpha}$ values, model calibration to accommodate various traffic flow situations is achievable. In Lighthill and Whitham's model, this is not possible. Our numerical test results showed that the new model yields significantly different outputs: the predicted shock wave speeds of the asymptotical model tend to lean toward the downstream direction in most cases compared to the shock wave speeds of Lighthill and Whitham's model for the same test environment. Statistical tests of significance also indicate that the outputs of the new model are significantly different than the corresponding outputs of Lighthill and Whitham's model.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2019.05a
• /
• pp.371-371
• /
• 2019

우리나라는 홍수기(6~9월)에 집중되는 기상패턴과 하천 중하류부에 발달된 도시의 개발특성으로 인하여 가장 중요한 자연재해 중 하나로 홍수 및 도시침수가 거론되고 있다. 과거 집중호우로 침수 피해가 발생한 사례를 살펴보면, 피해가 발생하는 지역은 지방하천 및 소하천을 중심으로 형성된 도시지역이다. 중앙 지방 정부는 수차례 침수 피해를 겪으며 사후관리가 아닌 재난예방 및 사전관리 등의 방안 마련을 강조하고 있다. 하지만 기후변화에 의한 기상의 불확실성으로 치수 중심의 물관리 및 중 소하천의 하천 특성으로 여전히 홍수 발생에 대비할 수 있는 골든타임 확보 등에 어려움을 겪고 있다. 이러한 어려움을 극복하기 위해 사전 예방적 차원에서의 홍수대응 방안으로 중 소하천을 담당하는 지자체 중심의 홍수피해 저감 방안이 필요하다. 본 연구에서는 A 지자체를 대상으로 모니터링 대상 경계를 설정하여 우량 알람 기준을 예비알람, 주요 관측지점에 대해 강우에 따른 수위 상승 정도를 홍수대응 기준인 직접알람과 연계함으로써 예방적 재난대응 체계를 구축하였다. 모니터링 대상 지역은 해당 지자체를 포함하면서 유역 개념을 적용하여 만경강유역 전체로 설정하였다. 만경강 유역 내 유관기관(지자체, 환경부, K-water, 기상청 등)이 관할하는 우량국(41개소) 및 수위국(28개소), 저수용량이 30만톤 이상이 되는 농어촌공사 저수지(7개소)를 고려하여 홍수분석 모형(COSFIM)을 구축하였다. 해당 모형은 2018년 8월 호우사상에 대해 주요 수위관측 지점에서 $R^2$가 0.8 이상의 우수한 검증 결과를 보였다. 구축된 모형을 통해 예상강우량별 하천 내 수위지점별 최고수위, 최대유량, 도달시간 등 예상 조견표를 제시하여 호우 발생시 지자체 담당자가 참고할 수 있도록 제시하였다. 또한 수위지점별 홍수대응 기준은 평시, 관심, 주의, 경계, 심각 단계로 구분하여 담당자가 수위별 위험 정도를 인지할 수 있도록 지점별 도달되는 수위의 위험 정보를 알람기준으로 제시하였다. 홍수분석 모형은 상류에 위치한 주요시설물의 운영현황을 연계하고 있어 실제 강우 발생 시 기상예보를 고려하여 하천 내 수위관측 지점별 수위 상승 정도를 예상함으로써 사전에 홍수에 대비할 수 있는 단계별 시간 확보에 활용 가능하다. 향후 홍수대응기준은 하천 환경 변화를 반영하여 지속적인 보완이 필요하며 유관기관과의 수문자료 공유체계 확대로 예방적 차원의 홍수 대응 체계가 구축되어야 할 것이다.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.46 no.1
• /
• pp.49-55
• /
• 2020

This study was conducted to establish optimal high pressure liquid chromatography (HPLC) conditions for estimation of the ergothioneine contents in the three kinds of water extracts of Pleurotus eryngii var. ferulae (Meaksong, Beesan No. 2, Baekwhang). By comparing the four different HPLC conditions, optimun condition for quantifying the contents of ergotioneine was established (shodex HILIC column, 35 ℃, 1.0 mL/min). By this method, the contents of ergothioneine in Meakong (3.04 ± 0.02 mg/g), Beesan No. 2 (3.15 ± 0.05 mg/g) and Baewhang (1.13 ± 0.07 mg/g) were estimated. DPPH and ABTS radical scavenger activities of these three kinds of Pleurotus eryngii var. ferulae were estimated and the contents of total phenol and flavonoid were also estimated. Taken together, this study establish an optimun HPLC condition for determining the ergothioneine contents in water extracts of Pleurotus eryngii var. ferulae. Furthermore water extracts of Maesong and Beesan No. 2 showed relatively high contents of ergothioneine and antioxidant activity, suggesting that these materials could be used as potential antioxidant in developing functional cosmetics.