• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.43 no.11 s.353
• /
• pp.26-36
• /
• 2006

In this paper, we propose a cost-effective color filter may (CFA) demosaicing method for digital still cameras in which a single CCD or CMOS image sensor is used. Since a CFA is adopted, we must interpolate missing color values in the red, green and blue channels at each pixel location. While most state-of-the-art algorithms invest a great deal of computational effort in the enhancement of the reconstructed image to overcome the color artifacts, we focus on eliminating the color artifacts with low computational complexity. Using spatial correlation of the adjacent pixels, the edge-directional information of the neighbor pixels is used for determining the edge direction of the current pixel. We apply our method to the state-of-the-art algorithms which use edge-directed methods to interpolate the missing color channels. The experiment results show that the proposed method enhances the demosaiced image qualify from $0.09{\sim}0.47dB$ in PSNR depending on the basis algorithm by removing most of the color artifacts. The proposed method was implemented and verified successfully using verilog HDL and FPGA. It was synthesized to gate-level circuits using 0.25um CMOS standard cell library. The total logic gate count is 12K, and five line memories are used.

• Information Systems Review
• /
• v.11 no.2
• /
• pp.67-90
• /
• 2009

This study addresses information technology using level has an effect on the collaboration and organization's performance depending on the partnership that is important because of rapid development of information technology and internet diffusion. In the long view, information technology persistently increases the performance and expects the useful factor for the examing the organization's performance. Information technology using level leaves the lowness or highly, information technical application effort for the future value of each enterprise is necessary, the staff education which continuous for this the fact that the introduction is more important what continuously is information technology which is suitable at the enterprise of execution. The main purpose of this study is to figure out the difference between collaboration and organization's outcome using information technology using level that is moderating variable and difference the effect.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.15 no.2
• /
• pp.145-150
• /
• 2015

Needs about safety of residents are important in urbanized society, elderly and small-size family. People are looking for safety information system and device of CPTED. That is, Needs and Installations of CCTV increased steadily. But, scientific analysis about validity, systematic plan and location of security CCTV is nonexistent. It is simply put these devised in more demanded areas. It has limits to look for safety of residents by increasing density of CCTVs. One of the characteristics of crime is clustering and stong interconnectivity. So, exploratory spatial data of crime is geo-coded using 2 years data and carried out cluster analysis and space statistical analysis through GIS space analysis by dividing 18 variables into social economy, urban space, crime prevention facility and crime occurrence index. The result of analysis shows cluster of 5 major crimes, theft, violence and sexual violence by Nearest Neighbor distance analysis and Ripley's K function. It also shows strong crime interconnectivity through criminal correlation analysis. In case of finding criminal cluster, you can find criminal hotspot. So, in this study I found concept of hotspot and considered technique about selection of hotspot. And then, selected hotspot about 5 major crimes, theft, violence and sexual violence through Nearest Neighbor Hierarchical Spatial Clustering.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.17 no.3
• /
• pp.319-332
• /
• 2004

Due to their high strength to weight ratios and excellent durability, fiber reinforced polymer(FRP) is widely used in construction industries. In this paper, a shape optimum design of FRP bridge decks haying pultruded cellular cross-section is presented. In the problem formulation, an objective function is selected to minimize the volumes. The cross-sectional dimensions and material properties of the deck of FRP bridges are used as the design variables. On the other hand, deflection limits in the design code, material failure criteria, buckling load, minimum height, and stress are selected as the design constraints to enhance the structural performance of FRP decks. In order to efficiently treat the optimization process, the cross-sectional shape of bridge decks is assumed to be a tube shape. The optimization process utilizes an improved Genetic Algorithms incorporating indexing technique. For the structural analysis using a three-dimensional finite element, a commercial package(ABAQUS) is used. Using a computer program coded for this study, an example problem is solved and the results are presented with sensitivity analysis. The bridge consists of a deck width of 12.14m and is supported by five 40m long steel girders spaced at 2.5m. The bridge is designed to carry a standard DB-24 truck loading according to the Standard Specifications for Highway Bridges in Korea. Based on the optimum design, viable cross-sectional dimensions for FRP decks, suitable for pultrusion process are proposed.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.21 no.4
• /
• pp.278-289
• /
• 2009

In the present study, we evaluated the target reliability indices and partial safety factors for caisson sliding of a vertical breakwater. The average of the reliability indices of existing breakwaters was proposed as the target reliability index for the breakwater of normal safety level. The target reliability indices of high and low safety levels were also proposed based on the analysis of breakwaters in Korea and Japan. The partial safety factors were then proposed for each safety level by averaging the values calculated for 12 breakwater crosssections in Korea. The appropriateness of the proposed partial safety factors was partly verified by showing that the reliability index calculated by using the present partial safety factors is located between those of mild and steep bottom slopes of JPHA(2007). The proposed partial safety factors were inversely used to calculate the caisson width and reliability index of existing breakwaters. While the reliability indices of existing breakwaters designed by the deterministic method show a large variation, those designed by the partial safety factor method show a small variation. This indicates that the partial safety factor method allows a consistent design for given target probability of failure.

• Proceedings of the Technology Innovation Conference
• /
• 2003.06a
• /
• pp.116-135
• /
• 2003

우리나라는 최근에 IMF 에 재정적 지원을 요청하는 상황이 계기가 되어 국가경쟁력과 삶의 질 측면에 상당한 관심을 가지게 되었다. 이러한 환경변화는 사회저변에 효율성을 강조하는 풍토를 확산시키고, 위기상황의 재발방지를 위해 그 원인을 분석하고 대안을 마련하는 등 사회 전반적으로 각고의 노력을 촉발시키게 하는 계기가 되었다. 이러한 논의들 중에 눈에 띄는 한가지는 과학과 기술사이의 관계에 관한 논쟁인데, 최근에 활발히 논의되고 있는 과학과 기술사이의 연계는 미국을 중심으로 많은 연구가 진행되고 있으며, 이러한 연구들은 대체적으로 과학과 기술사이에는 상당한 정도의 상관관계가 있고, 이 둘 사이는 서로 상호작용하면서 경제성장을 이끄는 역할을 한다고 주장하고 있다. 본 연구에서는 이러한 논의들을 국내에 적용시킴으로써 해외의 사례가 우리에게 시사점이 될 수 있는지 체계적으로 분석하려고 시도하였다. 과학과 기술사이의 연관성을 알아보기 위하여, 과학의 연구성과를 대변하는 대용치로 SCI논문을 사용하였고, 이러한 연구성과가 얼마만큼 사회에 파급되어 산업화 또는 상업화되었는지를 측정하기 위해 특허출원수를 추출하여, 연구의 목적에 맞게 modify 하는 과정을 거쳤으며, 추세분석과, 상관관계분석 그리고 회귀분석을 실시하였다. 본 연구는 실증분석을 통하여, 과학과 기술사이에는 일부 소수의 영역을 제외하고 매우 높은 상관관계가 있음을 발견하였고, 우리나라의 주력산업이었던 기계분야의 쇠퇴를 실증적으로 확인 할 수 있었으며, 정부의 적극적인 지원아래 폭발적으로 성장하였던 IT분야의 증가추세를 확인할 수 있었다. 따라서 본 연구에서는 국가경쟁력의 근간이 되는 연구개발부문에 경제논리를 배제하는 지속적인 투자를 제언함으로써, 국가경쟁력 제고와 삶의 질 향상이라는 두 마리 토끼를 잡을 수 있는 방안은 과학과 기술의 유기적인 연계에 있음을 밝히고 있다. 건설을 위한 정책적 시사점과 동북아 연구개발정보 Portal 및 APEC APGrid 연구망 등의 구체적인 정보인프라 구축방안을 도출하였다.술 주기를 도출하고, 산업 내 평균 권리 청구 항목 수를 이용하여 각 산업의 기술 범위를 비교하였다. 각각의 동적 분석을 통해 시간에 따른 변화 양상이 관찰하였고, ANOVA 분석을 이용하여 통계적 유의성을 검증하였다. 본 연구는 현재의 기술 패러다임 내에서 Pavitt이 제시한 산업 분류의 근거를 보충 설명하였고 특허 정보를 이용하여 기술혁신의 산업별 유형에 대한 폭넓은 분석방법을 제시하였다.별 시간대별 효과분석을 통하여 정책의 시행여부가 결정되어야 할 것이다. 한편, 화물전용차선의 설치로 인한 물류비용의 절감을 보다 효과적으로 달성하기 위해서는 종합류류 전산망의 시급한 구축과 함께 화물차의 적재율을 높이고 공차율을 낮출 수 있는 운송체계의 수립이 필요한 것으로 판단된다. 그라나 이러한 화물전용차선의 효과는 단기적인 치유책일 수밖에 없기 때문에 물류유통 시설의 확충을 위한 사회간접자본의 구축을 서둘러 시행하여야 할 것이다.으로 처리한 Machine oil, Phenthoate EC 및 Trichlorfon WP는 비교적 약효가 낮았다.>$^{\circ}$E/$\leq$30$^{\circ}$NW 단열군이 연구지역 내에서 지하수 유동성이 가장 높은 단열군으로 추정된다. 이러한 사실은 3개 시추공을 대상으로 실시한 시추공 내 물리검층과 정압주입시험에서도 확인된다.. It was resulted from increase of weight of single cocoon. "Manta"2.5ppm produced 22.2kg of cocoon. It is equal to 9% increase in index, as compared to that

• Korean Journal of Construction Engineering and Management
• /
• v.12 no.3
• /
• pp.91-100
• /
• 2011

Green technologies of buildings are spreading for saving resource and energy consumption during life cycle of buildings. However, selection of optimized the technologies for applying projects is needed a lot of time and costs. Therefore prioritization is necessary to apply the technologies for buildings. An evaluation of economic value for the technologies is significant for prioritization of the technologies, however, the current evaluation system of economic value for technologies is not reflected the accurate features of the technologies. Green technologies have the objectives for reducing the emission of CO2 and saving the cost during the whole lifecycle of buildings. Thus the evaluation of economic feasibility for green technologies is needed to include the economic value from improving the environment. This paper developed the economic evaluation method integrated with LCC and LCA to accurately analyze the economic value for green technologies. Moreover, this paper drew the priority of the technologies by conducting case studies with the integrated method and analyzing the results with AHP. The conclusion of case studies, Green technologies is worth more if to include the economic value from improving the environment. Then in analysis of priority, Green intelligent component technologies were rated the highest. The conclusion of the study is able to utilize the supporting tool for making decision to select the optimized technologies for the projects and precedence study for developing future research of prioritization for green technologies. The future study for improving the developed method will supplement the various evaluation factors and apply the detailed weight to analyze the priority of green technologies.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.3C
• /
• pp.398-407
• /
• 2004

In this paper, a blind watermarking method which is suitable to the video compression using 2-D discrete wavelet transform was proposed and implemented into the hardware using VHDL(VHSIC Hardware Description Language). The goal of the proposed watermarking algorithm is the authentication about the manipulation of the watermark embedded image and the detection of the error positions. Considering the compressed video image, the proposed watermarking scheme is unrelated to the quantization and is able to concurrently embed or extract the watermark. We experimentally verified that the lowest frequency subband(LL4) is not sensitive to the change in the spatial domain, so LL4 subband was selected for the mark space. And the combination of the bitplanes which has the properties of both the minimum degradation of the image and the robustness was chosen as the embedded Point in the mark space in LL4 subband. Since we know the watermark embedded positions and the watermark is embedded by not varying the value but changing the value, the watermark can be extracted without the original image. Also, for the security when exposing the watermark embedded position, we embed the encrypted watermark by the block cipher. The proposed watermark algorithm shows the robustness against the general image manipulation and is easily transplanted into the image or video compressor with the minimal changing in the structure. The designed hardware has 4037 LABs(24％) and 85 ESBs(3％) in APEX20KC EP20K400CF672C7 FPGA of Altera and stably operates in 82MHz clock frequency.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.2
• /
• pp.272-281
• /
• 2016

The effective exploitation of resources is critical for startup firms with insufficient resources to compete with well-resourced large firms. The direction and consistency of the resource input should be retained to utilize resources effectively, which will lead to a necessity for a fit between the strength in resources and the strategy of a firm. This study suggests hypotheses and verifies them empirically based on the logic that the attribute of resources in which a firm with a core competence decides the type of strategy and the formulated strategy presents the direction of the resource input, which enables the effective utilization of resources and facilitates high performance. According to the statistical results, the R&D capability affects the innovative differentiation strategy, marketing capability affects marketing differentiation strategy, and financial and production capability affects low cost strategy, in which the efficacy of the strategy depends on the attribute of resources. In addition, the R&D capability and marketing capability adversely affect the low cost strategy and the production capability negatively affects the innovative differentiation strategy, which implies that the exclusive choice of a strategy by the strength in resources results in improved performance. These results show that the fit between the resource and strategy is an essential cause of high performance in venture businesses.

• Journal of Korean Society of Environmental Engineers
• /
• v.36 no.11
• /
• pp.764-770
• /
• 2014

This study assessed analysis of N-nitrosamines by separation, identification, and quantification using a gas chromatography (GC) mass spectrometer (MS) with electron impact (EI) mode. Samples were pretreated by a automated solid phase extraction (SPE) and a nitrogen concentration technique to detect low concentration ranges. The analysis results by EI-GC/MS (SIM) and EI-GC/MS/MS (MRM) on standard samples with no pretreatment exhibited similar results. On the other hand, the analysis of pretreated samples at low concentrations (i.e. ng/L levels) were not reliable with a EI-GC/MS due to the interferences from impurity peaks. The method detection limits of eight (8) N-nitrosamines by EI-GC/MS/MS analysis ranged from 0.76 to 2.09 ng/L, and the limits of quantification ranged from 2.41 to 6.65 ng/L. The precision and accuracy of the method were evaluated using spiked samples at concentrations of 10, 20 and 100 ng/L. The precision were 1.2~13.6%, and the accuracy were 80.4~121.8%. The $R^2$ of the calibration curves were greater than 0.999. The recovery rates for various environmental samples were evaluated with a surrogate material (NDPA-$d_{14}$) and ranged 86.2~122.3%. Thus, this method can be used to determine low (ng/L) levels of N-nitrosamines in water samples.