• Journal of the Korean Institute of Gas
• /
• v.20 no.2
• /
• pp.66-71
• /
• 2016

Nowadays, a number of sensors which are placed in industrial complex are monitoring areas involving chemical leak and other faults. However, even in the presence of the sensors, chemical leaks, sometimes involving huge amount of chemicals, continuously led to big losses in the industrial complex. In most industries, sensor installation has been performed using past experience or using senor manufacturers' guideline; which leads to poor performance of the installed sensor grid. Therefore, we investigate an optimal placement methodology of point sensors for rapid detention and response when chemical leaks happen. This research suggests a generalized formulation suitable for the optimized decision making of minimizing number of sensors to be placed and increasing the fraction of covered scenarios under assumption of negligible effect of other structures. The proposed method has been verified for suitable performance for simple leak scenario simulations, by achieving the safety objectives and guaranteeing safe process operations.

• Journal of the Korean GEO-environmental Society
• /
• v.19 no.6
• /
• pp.13-22
• /
• 2018

The southwestern part of Korean Peninsula, which length is about 13,000 km, is largely formed with soft cohesive soil ground and when it is developed, the low bearing capacity and excessive settlement of soft ground give many problems. In particular, a lot of clayey soil is deserted due to high moisture content and weakness, and areas formed with soft ground. In this study it was performed unconfined compression test, CBR tests, laboratory frost heaving test, and wheel tracking test in order to determine the optimum mixture ratio of paper sludge ash added chemical stabilizer with soft soil for consideration of its frost heaving and strength characteristics. As a results of the above experiments, when the soft soil is mixed with 6% of chemical stabilizer to improve the soft soil for utilizing as a subgrade soil material. It is satisfied the quality standard of fill materials, and the results of this research are expected to be used as an appropriate usage standard for utilization of on-site soil generated.

• The Journal of the Korea Contents Association
• /
• v.13 no.11
• /
• pp.423-432
• /
• 2013

It is very important to prevent and management negative sides in advance can occur in service transaction as an employee' attitude during service encounter has a decisive effect on customers' service evaluation. Work stress has become one of the most widely studied topics in research, mainly because of its importance to employees' psychological health, which in turn affects service quality and organizational effectiveness. This study aims to explore how social support that hotel employees perceive influence on job stress and job burnout. Data were collected from 355 hotel employees at Deluxe Hotel in Seoul, analyzed using structural equation modeling techniques. The findings are as follows Firstly, social support had a significant influence on job stress. Secondly, social support had a significant influence on job burnout. Thirdly, job stress had a significant influence on job burnout. To reduce job stress and job burnout recognition, self-esteem and motivation, the hotel need to deliver a stronger coaching program. In addition, for an organization to respond flexibly. Finally, the results were discussed in the context of providing the job burnout management for employee.

• The Journal of the Acoustical Society of Korea
• /
• v.20 no.6
• /
• pp.57-65
• /
• 2001

In this paper, we designed the acoustic horn for magnetostrictive ultrasonic transducers in a theoretical manner, and validity of the analysis was verified through comparison with the results of finite element analysis. Results of the two analysis methods showed good agreement with each other. The theoretical method can fairly quickly determine the horn length that satisfies given frequency specification, but also has the drawback that it is applicable only to the frequency range over the cut-off frequency. According to the results, the catenoidal horn can provide larger amplification than the exponential horn. It was also found that it is more desirable for the region having the catenoidal curvature to be as short as possible to achieve larger amplification of the transducer deformation. Based on the analysis results, a magneto-strictive transducer sample was fabricated and its performance was evaluated experimentally. The transducer has the resonance frequency of 19.3 ㎑ as well as the maximum SPL of 199 dB, and shows the omni-directional radiation pattern.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.35 no.12
• /
• pp.1293-1300
• /
• 2011

The configurations of the evaporator and condenser of a water chiller can be determined from the trade-off between the heat transfer area, which is related to the capital cost and the pressure drop, which is associated with the operational cost. In this study, the design of the water chiller focused on minimizing the water pressure drop of both condenser and evaporator for given cooling capacity and requirements. Commercial enhanced tubes were employed to simulate real-life conditions. The results of the present analysis were compared with those obtained by HTRI software for verifying them. The results indicated that a reduction in the water pressure drop, which is associated with the short length of a tube, can be effected by decreasing the number of tube passes and increasing the number of tubes and the tube diameter. However, using a large number of tubes with smaller diameters can reduce the capital cost because the tubes are short. The reduction of the capital cost is due to the fact that a small-diameter tube has low internal thermal resistance and hence contributes to a decrease in the overall thermal resistance per unit length.

• Journal of Korea Water Resources Association
• /
• v.30 no.1
• /
• pp.45-54
• /
• 1997

The correct estimation of the daily or hourly urban water demand is required for the efficient management and operation of the water supply facilities. The prediction of water supply demand are regression model and time series method, the optimum ARIMA (Auto Regressive Integrated Moving Average) model was sought for the daily urban water demand estimation in this paper. The data used for this study were obtained from the city of Kwangju Korea. The raw data used in this study were rearranged 15, 30, 60, 90 days for the purpose of analysis. The statistical analysis was applied to the data to obtain the ARIMA model. As a result, the parameters determining the ARIMA model was obtained. The accuracy of the model was 2% of water supply. The developed model was found to be useful for the practical operation and management of the water supply facilities.

• Journal of KIISE:Computer Systems and Theory
• /
• v.27 no.8
• /
• pp.730-740
• /
• 2000

The software rejuvenation method for highly available multiplex systems uses a pro-active fault-tolerant approach to handle system failures. The software rejuvenation prevents failures from occurring, while the previous methods recover from failures after happening. Especially, since the software aging proceeds fast in the software used for the multimedia mobile computing due to the loss of communications or data, the preventive method from failures using software rejuvenation can be used for the multimedia mobile computing. In this paper, according to the operational parameters such as rejuvenation period, rejuvenation time, failure rate and repair rate of the servers, number of running servers, duration of running time, and type of running modes, we calculate steady-state probabilities, downtime, availability, and cost of the multiplex systems using software rejuvenation method. We validate the closed-form solutions of the mathematical model by experiments based on various operational parameters and find that the software rejuvenation method can be adopted as preventive fault-tolerant technique. The failure rate and unstable rate of the servers are essential factors for the decision making of the rejuvenation policies.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.6B
• /
• pp.443-452
• /
• 2012

In Mobile Ad-hoc Networks, previous routing protocols classified into proactive and reactive approach respectively have pros and cons under the use of applications and environment. Moreover, to integrate their advantages in case by case, hybrid approach is consistently researched, and Zone Routing Protocol (ZRP) was motivating many recent hybrid protocols. ZRP uses proactive routing to the node located within the zone defined by the specific number of hops, while it uses reactive routing to other nodes. However, in ZRP, because proactive routing is applied only within the zone defined by the number of hops, the zone is formed regardless of whether real data communication occurred frequently or not. In this paper, we propose a new hybrid routing scheme which employs the zone method but forms customized zone considering traffic load and number of hops, by a new decision method named Dynamic Zone Decision (DZD). Additionally, we analyze the performance of the proposed scheme, comparing with the previous proactive, reactive, and hybrid routings.

• Journal of KIISE:Computer Systems and Theory
• /
• v.37 no.3
• /
• pp.127-137
• /
• 2010

As large-scale computational applications in various scientific domains have been utilized over many integrated sets of grid computing resources, the difficulty of their execution management and control has been increased. It is beneficial to refer job history generated from many application executions, in order to identify application‘s characteristics and to decide selection policies of grid resource meaningfully. In this paper, we apply a statistical technique, Plackett-Burman design with fold-over (PBDF), for analyzing grid environments and execution history of applications. PBDF design identifies main factors in grid environments and applications, ranks based on how much they affect to their execution time. The effective factors are used for selecting reference job profiles and then preferable resource based on the reference profiles is chosen. An application is performed on the selected resource and its execution result is added to job history. Factor's credit is adjusted according to the actual execution time. For a proof-of-concept, we analyzed job history from an aerospace research grid system to get characteristics of grid resource and applications. We built JARS algorithm and simulated the algorithm with the analyzed job history. The simulation result shows good reliability and considerable performance in grid environment with frequently crashed resources.

• Journal of the Institute of Convergence Signal Processing
• /
• v.10 no.1
• /
• pp.86-92
• /
• 2009

As increasing of using induction motors, the induction motors faults cause serious damage to the industry. Therefore to find out faults of induction motor is recognized as important problem awaiting solution. But to make matters worse, the faults of induction motors often progress through long time. It means that early diagnosis is very important. Many researches have been progressed and general method of diagnosis is using vibration sensor to diagnose fault of induction motor. However, although it is reliability technique, it demands high price and it is difficult to use. This paper presents an implementation of technique for fault diagnosis of induction motor using wavelet transform based stator current and it is composed with algorithm that decides whether fault existence or not using C++ based on windows software. The algorithm will be accomplished in real-time using current data acquisition board and PC automatically with Neural Network algorithm.