• Proceedings of the Korea Water Resources Association Conference
• /
• 2019.05a
• /
• pp.126-126
• /
• 2019

과거부터 수자원분야는 공학적인 측면을 주로 강조하였으며, 따라서 인문사회학적 요소(예, 토지이용, 인구, 생태 환경, 경제발전 등)가 종종 배제된 채 시설물 계획이 이루어졌다. 그러나, 경제가 발전하고 사회의 모습이 복잡해짐에 따라, 수자원 관련 시설물의 계획에 있어 다양한 인문사회학적 요소를 고려할 필요성이 높아지고 있다. 본 연구에서는 사회-수문 모델링 기법을 이용하여 사회-수문 상호 간 순환적 관계를 파악하고, 특히 다목적댐이 인문사회에 미치는 영향을 정략적으로 파악하고자 하였다. 우리나라는 기후변화에 의한 극한가뭄과 홍수발생 빈도가 증가하고 있다. 이에 대한 대책으로, 다목적댐을 건설하여 효율적인 수자원 관리를 하고 있다. 본 연구에서는 대상지역으로 국내 강원도의 횡성댐을 선정하였다. 횡성댐은 하류에 위치한 횡성군과 원주시에 생 공 농업용수를 공급하는 용수원의 역할과 섬강 하류지역에 발생하는 홍수를 방어하는 역할을 하고 있다. 횡성댐 유역의 사회-수문학적 관계를 이해하기 위해 인과지도를 이용한 시스템 요소간의 상호연관성을 파악하였고, 이를 바탕으로 수문학적 요소와 인문사회학적 요소 사이의 관계식을 구성하였다. 수자원 분야에 해당하는 요소로는 생 공 농업용수 이용량 및 댐 저수량과 방류량을 선정하였으며, 인문사회학적 요소는 인구, 공업지역 농경지 주거지역의 면적 및 지역 내 총생산액을 선정하였다. 이와 같은 사회-수문학 요소를 바탕으로 해당 지역의 사회-수문 전체의 동태적 변화를 이해하기 위해 시스템 동적모의(System Dynamics) 모형을 이용한 모델링을 진행하였다. 다목적댐 건설 전 후로 대상지역의 용수 이용량과 인구 및 지역 총생산액 등의 데이터를 수집하여 모델을 검증하였다. 나아가 구현한 모형을 활용하여 향후 기후변화 발생 시 다목적댐이 대상지역의 용수이용 및 인구변화, 지역경제에 미치는 영향을 정량적으로 분석하였다. 본 연구는 인문사회분야와 수자원분야 사이의 영향관계를 이해하고, 모델을 이용한 정량적인 분석을 통해 향후 수자원 시설물 계획 및 정책마련을 위한 의사결정도구로 활용될 수 있을 것으로 기대한다.

• Nuclear Engineering and Technology
• /
• v.26 no.4
• /
• pp.526-535
• /
• 1994

For the evaluation of the corrosion behavior of the aluminum cladding in the KMRR(Korea Multipurpose Research Reactor) fuel, a modified Griess correlation was derived by introducing a heat flux factor derived from the comparison of the measured in-reactor corrosion data with the prediction of the Griess correlation. As a design criterion on the corrosion to maintain the KMRR fuel integrity, prevention of the oxide spallation was conservatively selected, which is conservatively assumed to occur when the temperature difference across the oxide layer exceeds 114$^{\circ}C$. A bounding power history of the KMRR fuel was determined by examining all the power histories of the KMRR fuel from cycle 1 to equilibrium cycle, and used to predict the maximum possible corrosion. Results of the corrosion prediction of the KMRR fuel with the bounding power history showed that the maximum local thickness of the oxide layer would be below 50$\mu$m and the design criterion on the oxide spallation would be satisfied with a factor of two margin. Therefore, it can be said that corrosion of the cladding will not impair the integrity of the KMRR fuel. Nevertheless, the applicability of the modified Griess correlation to the KMRR needs to be further verified through the KMRR fuel corrosion surveillance.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.16 no.2
• /
• pp.261-270
• /
• 2021

In this study, the design methodology of LCL filter for grid-connected three-phase inverter was studied. First, the advantages and disadvantages of applying typical filter structures as a filter for grid connection of a three-phase inverter were analyzed. Next, filter design methodologies for grid connection of a three-phase inverter were analyzed, and an effective filter design methodology was determined to satisfy the harmonic requirements in grid connection. In order to verify the effectiveness of the design methodology, EMTP models such as a three-phase inverter, a three-phase LCL filter, and a performance evaluation system to evaluate the performance of the designed filter were developed using EMTP-RV. Next, an LCL filter was designed for an application example of a three-phase inverter, and the waveforms of the output voltage and outage current of the three-phase inverter were checked through EMTP-RV simulation work. In particular, the validity of the design methodology was verified by confirming that the magnitude of the current ripple was reduced to a limited magnitude through waveform analysis of the output current.

• The Korean Journal of Archival Studies
• /
• no.46
• /
• pp.287-323
• /
• 2015

The purpose of this study is the design of the archival appraisal criteria to judge important research records and set the appraisal direction in the public research institution. The scope of research was limited to design the applicable appraisal criteria at the research institutions rather than in national level and the appraisal criteria examples in three public research institutions were analyzed. Based on the results of this analysis, I suggested the appraisal and selection criteria for long term preservation of research records including 10 appraisal areas. This study has a little limit because the suggested appraisal criteria was not verified by researchers(key appraiser) and enough examples were not analyzed. However, this study can support research institutions to set the scope and type of research records to be preserved. In addition, I hope that this study can give a little help institutions to judge and select key research records.

• Smart Media Journal
• /
• v.9 no.4
• /
• pp.162-169
• /
• 2020

Design is a key factor that determines the competitiveness of products in the textile and fashion industry. It is very important to measure the similarity of the proposed design in order to prevent unauthorized copying and to confirm the originality. In this study, a deep learning technique was used to quantify features from images of textile designs, and similarity was measured using Spearman correlation coefficients. To verify that similar samples were actually detected, 300 images were randomly rotated and color changed. The results of Top-3 and Top-5 in the order of similarity value were measured to see if samples that rotated or changed color were detected. As a result, the VGG-16 model recorded significantly higher performance than did AlexNet. The performance of the VGG-16 model was the highest at 64% and 73.67% in the Top-3 and Top-5, where similarity results were high in the case of the rotated image. appear. In the case of color change, the highest in Top-3 and Top-5 at 86.33% and 90%, respectively.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.5
• /
• pp.700-711
• /
• 2022

In this study, deepwater design waves were estimated for 16 wave directions and various return periods based on statistical analysis of extreme waves observed for more than 20 years at three stations (Chilbal-do, Geomun-do, Donghae). These values were compared with design waves estimated based on the omni-directional wave data. The Weibull distribution was used as the probability distribution function whose parameters were determined by the least square method. The Kolmogorov-Smirnov test was applied for the goodness of fit test. Notably, the directional design waves were smaller than the omni-directional design wave for every wave direction. The maximum 50-year wave heights for directional sectors were 7.46 m (NNE), 12.05 m (S), and 9,59 m (SSW) at Chilbal-do, Geomun-do and Donghae whereas those for uni-directional wave data were 7.91 m, 13.82 m and 10.38 m, respectively. This implied possible under-estimation of the deepwater design waves for 16 wave directions being currently used in the design of offshore and coastal structures.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.36 no.4
• /
• pp.233-242
• /
• 2023

The unscented Kalman filter (UKF), which is widely used to estimate the states of nonlinear dynamic systems, can be improved to realize robust system identification by using multiple sigma-point sets. When using Kalman filter methods for system identification, artificial noises must be appropriately selected to achieve optimal estimation performance. Additionally, an appropriate scaling factor for the sigma-points must be selected to capture the nonlinearity of the state-space model. This study entailed the use of Bouc-Wen hysteresis model to examine the nonlinear behavior of a single-degree-of-freedom oscillator. On the basis of the effects of the selected artificial noises and scaling factor, a new UKF method using multiple sigma-point sets was devised for improved robustness of the estimation over various signal-to-noise-ratio values. The results demonstrate that the proposed method can accurately track nonlinear system states even when the measurement noise levels are high, while being robust to the selection of artificial noise levels.

• Journal of the Korea Society of Computer and Information
• /
• v.28 no.8
• /
• pp.1-10
• /
• 2023

Recently, NAND flash memories have replaced magnetic disks due to non-volatility, high capacity and high resistance, in various computer systems but it has disadvantages which are the limited lifespan and imbalanced operation latency. Therefore, many page replacement policies have been studied to overcome the disadvantages of NAND flash memories. Although it is clear that these policies reflect execution characteristics of various environments and applications, researches on the foundation-policy decision for disk buffer management are insufficient. Thus, in this paper, we propose a foundation-policy recommendation model, called FRM for effectively utilizing NAND flash memories. FRM proposes a suitable page replacement policy by classifying and analyzing characteristics of workloads through machine learning. As an implementation case, we introduce FRM with a disk buffer management policy and in experiment results, prediction accuracy and weighted average of FRM shows 92.85% and 88.97%, by training dataset and validation dataset for foundation disk buffer management policy, respectively.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.273-273
• /
• 2022

혼합층(Mixed layer)은 온도가 일정한 수심층으로, 해수표면에 작용하는 바람의 영향으로 인하여 해수가 위아래로 섞여 형성된다. 이러한 혼합층은 영양염의 순환과 산소의 공급 등과 함께 일차생산량을 결정하는 중요한 요인이 될 수 있으며 혼합층 두께의 변동은 양식 산업에 영향을 미칠 수 있다. 최근에는 기후변화로 인한 해수면 상승 및 해수온 상승 등이 지속되고 있으며, 이러한 현상은 해양생태계의 변화를 초래하여 수산업의 피해를 유발할 수 있다(강원연구원, 2017). 이에 국립수산과학원, 기상청, 국립해양조사원 등 유관기관에서는 정선해양 수온 관측 및 해수순환모델을 이용하여 혼합층의 분석을 수행하고 있으나 격자 구축 및 초기·경계장 설정의 한계가 존재하여 정밀하고 정확한 혼합층 분석에는 어려움이 있다. 이에 본 연구에서는 비정형격자를 사용하여 격자 구축에 제약이 없는 SCHISM (Semi-implicit Cross-scale Hydroscience Integrated System Model)을 이용하여 우리나라 연안해역의 계절변화 및 기후변동성에 따른 혼합층 두께의 변화를 검토하고자 한다. 연구대상지는 서해·동해·남해를 포함한 우리나라 전체 연안 해역(위도: 32°N ~ 39°N, 경도: 124°E ~ 132°E)으로 선정하였으며, 격자크기 100 ~ 3,000 m인 삼각격자로 격자를 구축하였다. 혼합층을 분석하기 위하여 수직격자 층은 50층으로 SZ(Sigma Z coordinate system)좌표계를 사용하였다. 초기·경계장은 FES(Finite Element Solution)2014, HYCOM(Hybrid Coordinate Ocean Model) 및 대기모델 결과를 이용하여 설정하였다. 수치모형 검증을 위하여 수온관측소에서 수심별 측정한 수온 값과 SCHISM 결과 값을 비교하였고, 상대오차가 약 10% 이내로 나타나 모형의 정확도를 확인하였다. 최종적으로 해수면 상승 및 해수온 상승 시나리오를 고려하여 계절별 연안해역의 혼합층 두께의 변화 양상에 대하여 검토하였다. 향후에는 보다 정밀한 대기모델과의 혼합모형 구축 및 다양한 수심 별 관측자료를 활용한다면 실무에서 적용 가능한 혼합층 분석 및 수산업 피해 발생 지역에 대한 피해저감 대책 수립이 가능할 것으로 판단된다.

• Design Convergence Study
• /
• v.14 no.5
• /
• pp.47-56
• /
• 2015

People often use haptic experience as a basis for their preference decisions and value judgments, assuming that haptic experience with a product results from the properties of the products. However, research has suggested that unplanned haptic experience, which does not arise from the properties of the product itself, can also influence people's preference and value evaluation (Ackerman, Nocera, & Bargh, 2010). In this study, in order to verify (1) if such unplanned or accidental haptic experience changes user's cognitive tendency and (2) if accidental haptic experience leads to misattribution of the cause of haptic experience, two hypotheses were suggested and empirically investigated. Participants of the experiment were exposed to certain products on a display of a tablet PC and asked to decide on the maximum price they were willing to pay for each product. The products displayed on the screen were made up of either soft material or hard material. Results of the experiment revealed that accidental haptic experience had an effect on participants' value evaluation of products via altering their cognitive inclinations. Possible applicability of accidental haptic experiences that occur in various situations were discussed.