• Journal of Ocean Engineering and Technology
• /
• v.11 no.4
• /
• pp.130-140
• /
• 1997

원형주상체 주위의 유동을 규명하기 위해 회류수조에서 원주방향으로 24개의 위치에 대하여 압력을 계측하였으며, laser sheet을 이용하여 유동을 가시화 하였다. Reynolds수가 4800에서 40000인 범위에 대하여 실험을 수행하였다. 또한, 원형단면체 주위의 비정상 층류유동에 대한 Navier-Stokes방정식의 해를 구하는 수치해석기법을 개발하였다. 효과적인 격자배치를 위하여 H와 O-type의 중첩격자를 사용하였고, 이산화 방법으로는 정규격자시스템에서 유한차분법을 적용하였다. 실험과 수치해석결과에서 뚜렷한 와류박리현상을 볼 수 있었으며, 압력계수 (C$_{p}$ ), 항력계수(C$_{D}$), 스트로얼수(St)를 정량적으로 비교하였을 때, 비교적 잘 일치하는 것을 확인하였다.다.

• Proceedings of the Optical Society of Korea Conference
• /
• 2009.02a
• /
• pp.297-298
• /
• 2009

파장 분할 방식의 광섬유 격자 센서의 멀티플렉싱 능력을 향상시키기 위하여 이중 격자의 파장 간격 변조로 구분되는 다중 광섬유 격자 센서 시스템을 제안하였으며, 서로 다른 파장 간격을 가지는 센서의 상태와 위치를 정확히 구별할 수 있는 방법을 연구하고 씨뮬레이션을 통하여 확인하였다. 또한 변형력 하에서 광섬유격자 센서들간의 스펙트럼 중첩으로 불명확한 브래그 피크를 최급 강하법(steepest descent method) 알고리즘을 사용하여 약 3 pm이내의 표준편차로 결정할 수 있었다.

• Journal of computational fluids engineering
• /
• v.13 no.1
• /
• pp.49-56
• /
• 2008

Chimera grid methods have been widely used in Computational Fluid Dynamics due to its simplicity in constructing grid systems over complex bodies, and suitability for unsteady flow computations with bodies in relative motion. However, the interpolation procedure for ensuring the continuity of the solution over overlapped regions fails when the so-called orphan cells are present. We have adopted the MLS(Moving Least Squares) method to replace commonly used linear interpolations in order to alleviate the difficulty associated with the orphan cells. MLS is one of the interpolation methods used in mesh-less methods. A number of examples with MLS are presented to show the validity and the accuracy of the method.

• Journal of computational fluids engineering
• /
• v.17 no.1
• /
• pp.70-77
• /
• 2012

In this paper, diagonal implicit harmonic balance method with overset grid technique is applied to analyze helicopter rotor blade flow in hover and forward flight condition. The chimera grid need interpolation time with sub-grid and background grid in moving problem such as forward flight on every time step. Present method is available enough to reduce the grid module interpolation time. In order to demonstrate present method, Caradonna & Tung's and AH-1G rotor blades are used and the results are compared to other researchers' result and experimental data.

• 한국전산유체공학회:학술대회논문집
• /
• 2007.04a
• /
• pp.17-22
• /
• 2007

Chimera grid Method is widely used in Computational Fluid Dynamics due to its simplicity in constructing grid system over complex bodies. Especially, Chimera grid method is suitable for unsteady flow computations with bodies in relative motions. However, interpolation procedure for ensuring continuity of solution over overlapped region fails when so-call orphan cells are present. We have adopted MLS(Moving Least Squares) method to replace commonly used linear interpolations in order to alleviate the difficulty associated with orphan cells. MSL is one of interpolation methods used in mesh-less methods. A number of examples with MLS are presented to show the validity and the accuracy of the method.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2021.06a
• /
• pp.171-171
• /
• 2021

전 세계적인 기후변화로 인해 홍수가 발생하는 빈도가 상승하고 있으며, 도시화가 발달됨에 따라 재산 피해 금액도 증가하는 추세이다. 이와 같은 홍수피해를 저감시키기 위하여 수공 구조물의 보강 및 설치와 같은 효과적인 구조적 대책이 필수적이다. 구조적 대책의 경우 예방차원의 재난관리를 위하여 치수 사업 전/후의 경제성을 평가해야 하는데, 국내에서는 개선법과 다차원 홍수피해 산정법(MD-FDA, 이하 다차원법)을 활용하여 정량적인 경제성 평가를 수행하고 있다. 그리고 다차원법의 경우 공간정보자료인 토지피복도를 활용하기 때문에 침수된 건물을 각각 산정해줌으로서 보다 정확한 경제성 분석을 실시할 수 있지만 산정 절차가 복잡하여 시간이 오래 걸리는 단점을 지니고 있다. 따라서 본 연구에서는 개선법과 다차원법의 단점을 보완하고자 격자단위 공간정보를 활용한 건물피해 산정방법을 제안하고자 하였다. 국토정보플랫폼에서는 100m×100m 격자 자료를 제공해주고 있으며, 각각의 격자에는 단독 주거, 공동 주거의 공간정보 자료가 구축 되어있다. 이러한 격자자료와 홍수범람지도를 중첩하여 격자 단위 홍수 피해액을 산정함으로서 절차를 간결하게 할 수 있다. 또한 본 연구를 통하여 추정된 피해 금액과 비교적 정확한 홍수 피해액을 추정하는 기존 다차원법의 피해 금액을 비교하여 격자단위 공간정보를 활용한 건물피해 산정방법을 평가하였다. 본 연구를 통하여 개발한 방법을 사용하게 된다면 경제성분석 결과가 과대 산정되는 개선법을 보완할 수 있으며, 계산과정이 복잡하여 실무에서의 적용성이 부족한 다차원법의 문제점도 보완할 수 있을 것으로 판단된다. 또한 신속한 피해액 추정을 통하여 홍수 피해를 예방하는데 필요한 치수사업을 빠르게 선정함으로서 후속 피해를 신속히 예방할 수 있을 것이다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.36 no.10
• /
• pp.979-987
• /
• 2008

In aerospace structural design, the position of lightening hole is often required to be optimized from the initial design in order to avoid an excessive stress concentration. To remodel the updated configuration in optimization procedure, re-meshing procedure is conventionally adopted. However, this approach is time-consuming, and has limitations especially in handling hexahedral or quadrilateral meshes, which are preferred because of their good numerical performances. To attenuate these disadvantages, new optimization scheme is proposed by combining the MLS(Moving Least Squares) based overset method and the genetic algorithm in this work. To test the validity of the proposed optimization scheme, optimizations of positions of lightening holes in 2D structures have been carried out.

• Journal of the Society of Naval Architects of Korea
• /
• v.45 no.2
• /
• pp.109-123
• /
• 2008

The present paper presents the CFD result for a beam wave test case. An ONR tumblehome ship model with bilge keels is used. The beam wave test is for zero forward speed and roll and heave 2DOF with wave slope $a_k=0.156$ and wavelength ${\lambda}=1.12L_{PP}$, with $L_{PP}$ the ship length. The problems is solved numerically with an unsteady Reynolds averaged Navier-Stokes approach. The free surface flow is computed using a single-phase level-set method and the motions in each time step are integrated using a predictor-corrector iteration approach which uses dynamic overset grids moving with relative ship motion. The predicted CFD results for motions and forces are compared with experimental data, showing a reasonable agreement.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.39 no.11
• /
• pp.995-1004
• /
• 2011

Object X-ray method commonly used for hole search in overset grids requires huge amount of time due to complicated vector calculations to search the cross-points as well as time-consuming hole search algorithm with respect to background grids. Especially, when the grid system is in motion relative to the background, hole points should be searched at every time step, leading to hung computational burden. To cope with this difficulties, this study presents an efficient hole search algorithm mainly designed to reduce hole searching time. To this end, virtual surface with reduced grid points is suggested and logical operators are employed as a classification algorithm instead of complicated vector calculations. In addition, the searching process is further accelerated by designating hole points in a row rather than discriminating hole points with respect to each background grid points. If there exists a relative motion, the present algorithm requires much less time because only the virtual surface needs to be moved at every time step. The hole searching time has been systematically compared for a few selected geometries.

• Journal of Korean Society for Geospatial Information Science
• /
• v.17 no.4
• /
• pp.53-60
• /
• 2009

Recently, the Korean government has amended the "National Territory Planning Act" by adding criteria to designate the Impact Fee Zone on the basis of the population increase rate. Taking the Dongtan Newtown in Hwasung City as the case, the study first tries to apply a grid analysis method to figure out the cells that exceed the legal population increase rate criteria. Then, the study, for rather a practical purpose, introduces a scenario analysis that tries to envelope the cells into a spatially contiguous groups based on their degrees of stepwise adjacency by cell buffer formation. By overlapping the selected cell groups chosen by such stepwise scenarios over the actual zoning map of land-uses for the vicinity, it seems clear that the chosen areas rationally coincide with those residential blocks and commercial areas with the high population density in the Newtown.