• Korean Journal of Optics and Photonics
• /
• v.12 no.5
• /
• pp.401-405
• /
• 2001

We propose a novel channel-switching transmission filter using segmented chirped fiber Bragg gratings (CFBG's) each of which has separate transmission bands in the reflection spectrum of the CFBG. The segmented CFBG's are made by using specially designed slits. The separated reflection spectral bands of the segmented CFBG's are controlled by the attached fiber stretchers, and the controlled reflection bands are used to choose the channels independently. Tunability of the transmission spectra is experimentally demonstrated in WDM transmission experiments.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.34 no.5
• /
• pp.1-11
• /
• 2006

The effects of continuous blowing on flow control and stall suppression for flows over a NACA 0015 airfoil at low Reynolds numbers were numerically investigated through its parameter variation on unstructured meshes. The aerodynamic force and moment variations due to flow control were examined, along with the stall angle-of-attack change for stall suppression. The results showed that blowing with relatively strong jet increases lift at the cost of drag increment below stall angle. Continuous blowing delays flow stall when it is implemented near the leading edge. When the blowing jet was aligned along the flow direction on the airfoil, the favorable flow control effect was most significant below the stall angle of attack.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.39 no.12
• /
• pp.1124-1132
• /
• 2011

This paper deals with smooth path generation using B-spline for fixed-wing unmanned aerial vehicles manuevering in 2D environment. Hexagonal cell representation is employed to model the 2D environment, which features increased connectivity among cells over square cell representation. Subsequently, hexagonal cell representation enables smoother path generation based on a discrete sequence of path from the path planner. In addition, we present an on-line path smoothing algorithm incorporating B-spline path templates. The path templates are computed off-line by taking into account all possible path sequences within finite horizon. During on-line implementation, the B-spline curves from the templates are stitched together repeatedly to come up with a reference trajectory for UAVs. This method is an effective way of generating smooth path with reduced on-line computation requirement, hence it can be implemented on a small low-cost autopilot that has limited computational resources.

• Korean Journal of Optics and Photonics
• /
• v.15 no.3
• /
• pp.214-221
• /
• 2004

We theoretically and experimentally investigate the effect of apodization on the transmission characteristics of linearly chirped fiber Bragg gratings(CFBGs). Based on the UV beam scanning method along a phase mask, we fabricated several apodized CFBGs with different apodization profiles such as Gaussian, Raised-cosine, Blackman, and Hyperbolic tangent. During the UV beam scanning, the phase mask is dithered by a PZT(Piezoelectric transducer) which is precisely controlled by a computer program so that the apodization profiles can be flexibly applied to the grating. We measured the reflection spectra and group delay characteristics of CFBGs with the different apodization profiles, and compared them according to their properties such as reflectivity, sidelobes, and group delay ripple (GDR). The peak-to-peak of GDR could be suppressed to less than 20 ps.

• Journal of Advanced Navigation Technology
• /
• v.21 no.5
• /
• pp.472-478
• /
• 2017

In this paper, we deals with optimizing traffic signal timing in grid networks by using a network topology design method. Optimizing traffic signal timing includes minimizing delay time delay between departure and destination by interlocking straight traffic signal in the minimum spanning tree(MST). On the assumption that users of network abide by the paths provided in this paper, this paper shows optimizing traffic signal timing in grid networks. the paths provided in this paper is gathered by using Dijkstra algorithm used in computer networks. The results indicate minimizing delay time of passing through the grid network and interlocking traffic signal in the grid network.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.42 no.10 s.340
• /
• pp.19-28
• /
• 2005

In this paper, we analyzed tuning characteristics of the widely tunable SGDFB laser diode integrated with SGDBR. The improved time-domain model is used to analyse the laser diode. From the numerical analysis, the length of phase control region in the SGDFB section influences on the output power and the tuning range. Also, it was confirmed that the tuning range is affected by the length of the laser diode, the residual reflectivity at the facet, and the position of the facet.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2003.05a
• /
• pp.299-302
• /
• 2003

In fuzzy control systems having large volumes of fuzzy data. one of the important problems is the improvement of execution speed in the fuzzy inference and defuzzification stages. In this paper, to improve the speedup of fuzzy controllers, we use an integer line mapping algorithm to convert [0, 1] real values in the fuzzy membership functions to integer pixels. U sing this, we propose a real-time high-speed fuzzy control system and implement a fast fuzzy processor and control system using FPGAs.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.9
• /
• pp.1635-1641
• /
• 2017

In this paper, a trellis-coded 3-dimensional (3-D) orthogonal frequency division multiplexing (OFDM) system is presented and its performance is analyzed. Here, a set-partitioning technique for trellis coding with respect to a 3-D signal constellation is also presented. We show theoretically that the proposed system, which exploits a trellis coding scheme with recursive systematic convolutional codes (RSC) of code rate R = 1/3 and 2/3, can improve symbol error rate (SER) up to 7.8 dB as compared with the uncoded OFDM system in an additive white Gaussian noise (AWGN) channel. Computer simulation confirms that the theoretical analysis of the proposed system is very accurate. It is, therefore, considered that the proposed trellis-coded 3-D OFDM system is well suited for the high quality digital transmission system without increase in the available bandwidth.

• Journal of Software Assessment and Valuation
• /
• v.16 no.1
• /
• pp.55-63
• /
• 2020

Lasers for optical broadband communication systems should have excellent frequency selectivity and modal stability. DFB lasers have low lasing frequency shift during high speed current modulation. In this paper, when a refractive index grating and a gain grating are simultaneously present in a DFB laser having a wavelength of 1.55 ㎛, the dielectric film is coated so that reflection does not occur on the right mirror surface, so that ρ_r=0. For the first mode, which requires a minimum gain at the threshold, the beam distribution of the oscillation mode in the longitudinal direction and the radiated power ratio P_l/P_r were analyzed and compared for the cases of the phase of ρ_l=π and π/2. If the phase of ρ_l=π, in order to obtain a low threshold current and high frequency stability, κL should be greater than 8. In the case of the phase of ρ_l=π/2, for low threshold current, κL is necessary to be 1.0, where the oscillation frequency coincides with the lattice frequency. DFB lasers with an anti-reflection coated mirror have excellent mode selectivity than 1.55um DFB lasers with two mirror facets

• 제어로봇시스템학회:학술대회논문집
• /
• 1988.10a
• /
• pp.225-230
• /
• 1988

In this paper, a new method for determining the order of AR, ARMA processes based on PLS (predictive least square) principle is proposed, This method using modified lattice algorithm which has additional step is amenable to on-line or adaptive operation and is more accurate than any other mpthod. Some computer simulations are presented to show the efficiency of the proposed algorithms.