• Nuclear Engineering and Technology
• /
• v.16 no.4
• /
• pp.202-216
• /
• 1984

The success of coarse-mesh nodal solution methods provides strong motivation for finding homogenized parameters which, when used in global nodal calculation, will reproduce exactly all average nodal reaction rates for large nodes. Two approximate theories for finding these ideal parameters, namely, simplified equivalence theory and approximate node equivalence theory, are described herein and then applied to the PWR benchmark problem. Nodal code, ANM, is used for the global calculation as well as for the homogenization calculation. From the comparative analysis, it is recommended that homogenization be carried out only for the unique type of fuel assemblies and for core boundary color-sets. The use of approximate homogenized cross-sections and approximate discontinuity factors predicts nodal powers with maximum error of 0.8% and criticality within 0.1% error relative to the fine-mesh KIDD calculations.

• Geophysics and Geophysical Exploration
• /
• v.11 no.3
• /
• pp.177-183
• /
• 2008

The sub-salt imaging technique becomes more crucial to detect the hydro-carbonates in petroleum exploration as the target reservoirs get deeper. However, the weak reflections from the sub-salt structures prevent us from obtaining high fidelity sub-salt image. As an effort to overcome this difficulty, we applied the waveform inversion by implementing multi-grid technique to the sub-salt imaging. Through the comparison between the conventional waveform inversion using fixed grid and the multi-grid technique, we confirmed that the waveform inversion using multi-grid technique has advantages over the conventional fixed grid waveform inversion. We showed that the multi-grid technique can complement he velocity estimation result of the waveform inversion for imaging the sub-salt structures, of which velocity model cannot be obtained correctly by the conventional fixed grid waveform inversion.

• Journal of Environmental Impact Assessment
• /
• v.27 no.5
• /
• pp.447-474
• /
• 2018

The purpose of this study is to build a new dataset of spatially interpolated climate data of South Korea by performing various geo-statistical interpolation techniques for comparison with the LDAPS grid data of KMA. Among 595 observation data in 2017, 80 % of the total points and remaining 117 points were used for spatial mapping and quantification,respectively. IDW, cokriging, and kriging were performed via the ArcGIS10.3.1 software and Python3.6.4, and each result was then divided into three clusters and four watersheds for statistical verification. As a result, cokriging produced the most suitable grid climate data for instantaneous temperature. For 1-hr accumulated precipitation, IDW was most suitable for expressing local rainfall effects.

• Korean Journal of Optics and Photonics
• /
• v.8 no.4
• /
• pp.340-344
• /
• 1997

We proposed and demonstrated a tunable wavelength optical add/drop multiplexer(OADM) employing piezoactuated fiber grating pairs and polarization beam splitters. We used piezostack act as a fiber stretcher, using the fact that the resonant wavelength of the grating can be controlled by the axial strain along the fiber grating. The polarization controlled configuration showed high stability because the reflected signals from the two identical gratings are dropped or added not by interference but by polarizations of the beams. We could add and drop not noly 1549.3nm signal channel(original gratings), but also 1550.1nm(tuned gratings) with PZT actuators and in both cases, we found that the rejection of adjacent channels was more than -26dB, and signal leakage at the gratings was less than -34dB.

• Journal of KIISE:Computer Systems and Theory
• /
• v.29 no.2
• /
• pp.94-104
• /
• 2002

As a part of scientific data visualization automatic generation algorithms for a contour map have been investigated mainly on data which are defined at every lattice point. But in actual situation like weather data measurement. it is impossible to get data defined at every lattice point This is because the exact value on every lattice point can not be obtained due to characteristics in sampling devices or sampling methods. In order to define data on every lattice point where data were not sampled an interpolation method. was applied to the sample data to assign approximate values for some lattice type data but by using the non-lattice type of sample data sets. A triangle data link was defined by using non lattice points directly based on actually sample data set, not by using the pre-processed rectangle lattice points. The suggested algorithm generates a contour map a contour map only by using sample data set which are much smaller than old one without data interpolation and there is no skew on data any more since it does not need any interpolation to get the values of the defined lattice points.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 1999.05a
• /
• pp.127-132
• /
• 1999

우리나라의 도시폐기물 소각로는 화격자 위에 폐기물을 공급하고 화격자 밑에서 공기를 공급하는 스토커식 소각로를 대부분 채택하고 있다. 이러한 스토커 소각로 연소실내에서는 매우 복잡한 연소현상이 발생하는데, 연소실로 투입된 쓰레기는 먼저 건조부에서 수분의 건조가 일어나고, 화격자의 구동에 의해 쓰레기가 혼합 및 이송되면서 열분해, 가스화, 가연성분의 탈휘발화 및 연소, 일부 고정탄소의 표면연소 등의 반응이 일어난다. 그리고 1,2차 연소실에서는 휘발분 및 비산된 고체의 연소가 일어나는데, 이때 대류 및 복사열전달 등의 복잡한 현상을 수반하는 유동장이 형성된다. 더욱이 불균질한 특성을 갖는 쓰레기층 내에서의 복잡한 현상으로 인하여 발생하는 경계조건 설정의 불확실성으로 연소실내의 연소 현상을 전산해석하는 데에는 상당한 어려움이 있다.(중략)

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.32 no.5
• /
• pp.50-57
• /
• 2004

For the application of structural health monitoring such as AE detection, a stabilized FBG sensor system with wide dynamic range was proposed. A tunable Fabry-Perot filter with narrow free spectral range(FSR) was used to simplify the multiplexing demodulator for FBG vibration sensors. Stabilization controlling system was also developed for the maintenance of maximum sensitivity of the sensors. In order to verify the performance of the proposed FBG vibration sensor system, we measured sensitivity, and the system showed the average sensitivity of 256 $n{\in}_{mas}/{\sqrt{Hz}}$. Finally, multi-points vibration tests using in-line FBG sensors were conducted to validate the multiplexing performance of the FBG system.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2007.05a
• /
• pp.2130-2134
• /
• 2007

선형 Boussinesq 형태의 파동방정식을 지배방정식으로 사용하는 능동적인 분산보정 지진해일 전파 유한 차분모형의 정확도를 향상시키기 위한 새로운 동시격자접속기법을 개발하였다. 이 격자접속기법은 공간에 대해 3차 보간식을 사용하므로 짧은 파에 대해서 보간에 따른 오차를 최소화할 수 있고, 시간에 대해 2차 보간식을 사용하기 때문에 기존 기법에 비해 더 정확한 값을 얻을 수 있다. 개발된 격자접속기법의 정확성을 평가하기 위해 수중 원형천퇴상을 전파하는 Gaussian 형상의 가상지진에 대해 격자접속기법을 적용하지 않고 계산한 결과와 격자접속기법을 적용하여 계산한 결과를 FUNWAVE에 포함되어 있는 선형화된 Boussinesq방정식에 의해 계산된 수치해와 비교하였다. 그 결과 개발된 동시격자접속기법의 우수함이 검증되었다.

• Composites Research
• /
• v.17 no.4
• /
• pp.32-39
• /
• 2004

Among many fiber optic sensors, FBG sensors are being studied more actively than any other sensor due to good multiplexing capabilities. Recently, the application fields of FBG sensors are mainly focused on the composite materials through embedding rather than attaching on the surface. However, there are many limitations on the embedding FBG sensors into composite materials because of the birefringence effects which is induced when FBG sensors are not embedded parallel to the reinforcing fiber. In this study, the fabrication method of FBG sensors with various grating length that are easy to fabricate with good multiplexing capabilities and more stable from the birefringence effects are investigated. The signal characteristics of the FBG sensors are also verified through the cure monitoring of 2 kinds of composite materials.

• The Optical Journal
• /
• s.96
• /
• pp.55-59
• /
• 2005

광섬유격자 제조기술과 응용기술의 개발은 다양한 응용분야와 관련하여 광산업분야에 필수적인 요소이다. 또한 평판형 광도파로격자소자는 DWDM등 광전송 기술산업에 핵심적이고 원천적인 연구로서, WDM(Wavelength Division Multiplexing: 파중분할다중방식), Add/Drop Multiplexer 등 분야에 대한 응용기술연구가 필요하다. 광섬유 브래그격자(FBG: Fiber Bragg Grating)는 광통신 시스템의 핵심부품 중 하나이다. 제작공정의 특성상 다른 부품에 비하여 삽입손실(Insertion Loss)이 매우 작고, Fiber Laser, Laser wavelength stabilization, 광섬유 증폭기의 pump reflector, add/drop filter, optical circulator, 광증폭기의 이득평탄화 등 매우 다양한 응용분야를 가지고 있으며, 향후 수요시장이 대폭 증가할 것으로 기대된다.