• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.22 no.2
• /
• pp.129-134
• /
• 2022

The resonant bio-sensor of bi-level grating structure with mushroom profile has been designed for operating in the near-infrared (NIR) wavelength range under transverse electric (TE) polarization. The rigorous modal transmission-line theory (MTLT) is applied to determine the optical characteristics, and the reflection resonance of the grating structure is analyzed by varying their geometrical parameters. The numerical result shows that an excited sharp Fano resonance (FR), which does not occur in single layer grating, is demonstrated. The relationship between structure parameters of bi-level grating and the reflectance spectrum in order to guarantee the appearance of FR in the designed structure is fully investigated. An optical bio-sensor with a potential sensitivity of 112.9~214.3 deg/RIU and 447 nm/RIU is designed based on the proposed structure. The proposed mushroom profile may serve as a powerful sample for the design of optical bio-sensors with a wide range of applications.

• Journal of the Mineralogical Society of Korea
• /
• v.8 no.2
• /
• pp.57-72
• /
• 1995

춘천 지역 선캠브리아기의 구봉산층군 내의 백운석질 대리암에는 광역변성작용의 산물로서 조립질의 투각섬석이 주된 규산염 광물상을 이루며 산출된다. 이들은 배태 층준과 원암의 조성에 따라 두 가지 유형으로 구분된다. : (1) 투각섬석(흑회색)+방해석+백운석+활석, (2)투각섬석(백색)+금운모+백운석+방해석+K-장석, 백색의 투각섬석이 흑회색형보다 상대적으로 높은 Al과 알칼리 함유도를 보이지만, 전반적으로 모두 Mg-단종에 가까운 화학 조성을 갖는다. 투각섬석들이 격자 구조상의 결함 구조를 갖지 않는데 비해서, 금운모는 1M 구조형을 이루고 저면 격자 간격상에 녹니석 단위의 빈번한 개재에 의한 격자상의 구조적 결함이 흔히 관찰된다.방해석-백운석 지온계에 대한 연구와 TWEEQU 프로그램을 이용한 상평형도 작성을 통해서, 투각섬석들은 500~$600^{\circ}C$의 온도 범위, 8kb 정도의 압력 및 Xco2=0.2~0.5 조건에서 생성된 것으로 해석하였다. 이 지역의 투각섬석은 위와 같은 조건에서 지속적으로 평형 상태가 유지되고 상안정도가 증대되므로서, (1) 투휘석을 수반하지 않고, (2) 격자 구조상의 결합을 갖지 않는, (3) 자형의 큰 결정을 이루게 된 것으로 해석된다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.6B
• /
• pp.573-581
• /
• 2006

This paper presents a turbulence modeling of the open-channel flows over smooth-rough bed strips. A Reynolds stress model is used for the turbulence closure. The simulated mean flow and turbulence structures are compared with the previously reported experimental data. Comparisons reveal that the developed Reynolds stress model successfully predicts the mean flow and turbulence structures of open-channel flows over smooth-rough bed strips. The computed flow vectors show cellular secondary currents, of which the upflow occurs over the smooth bed strip and the downflow over the rough bed strip. It is found that the cellular secondary currents affect the mean flow and turbulence structure. A budget analysis of the streamwise vorticity equation is also carried out to investigate the mechanism by which the secondary currents are generated.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.11b
• /
• pp.234-237
• /
• 2002

To detect external vibration signals on the latticed fence structure, distributed fiber optic sensor using Sagnac interferometer was fabricated and tested. The latticed structure fabricated with dimension of 170cm in width and 180cm in height, the optical fiber, 50m in length, distributed and fixed on the latticed structure. It was verified the sensitivity of the Sagnac interferometer using the PZT phase modulator. Fiber optic external vibration signal spplied to the latticed fence structure from 100Hz to several kHz. The interferometeric fiber optic sensor detected the excited vibration signal very effectively without any signal processing. The detected optical signals were compared and analyzed to the detected acclerometer signals.

• Proceedings of the Optical Society of Korea Conference
• /
• 2003.02a
• /
• pp.324-325
• /
• 2003

광섬유 브래그 격자 센서(Fiber Brags Grating Sensor： FBG Sensor)는 여타 광섬유 센서와 같이 가볍고 저렴하며 주위의 전자기적 잡음에 무관한 장점과 더불어 측정대상이 반사광의 파장변화이므로, 광섬유 연결부나 실험장치들에 의해 생기는 광 손실이나 잡음에 대해서 강인한 측정을 할 수 있다. 그리고 파장변화가 변형률이나 온도변화에 선형적으로 나타나므로, 센서로서 많은 연구가 진행되고 있다. 특히, 구조물의 내부에 삽입하여 구조물 스스로 외부의 환경변화를 감지하여 필요한 동작을 수행하는 지능형 구조물(Smart Structure)에 적합한데, 이를 위해선 구조물의 여러 지점을 측정해야 하므로, 브래그 격자 여러개를 한 시스템에서 사용하는 다중화(Multiplexing)가 필수적이다. (중략)

• Computational Structural Engineering
• /
• v.3 no.4
• /
• pp.105-112
• /
• 1990

A rational and straightforward method is introduced for developing continuum models of large platelike periodic lattice structures based on energy equivalence, The procedure for developing continuum models involves using existing finite element matrices in calculating strain and kinetic energies of a repeating cell. The equivalent continuum plate properties are obtained from the direct comparison of the reduced stiffness and mass matrices for continuum and lattice plates. Numerical results prove that the method developed in this paper shows very good agreement with other well-recognized methods.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.34 no.3
• /
• pp.31-36
• /
• 2006

In this study, nonlinear static aeroelastic analysis system for a high-aspect-ratio wing are developed using the transonic small disturbance (TSD) and large deflection beam theory and validated. For the coupling between fluid and structure, the transformation of displacement from the structural mesh to aerodynamic one is performed by the shape function of the beam finite element and the inverse transformation of force by work equivalent load concept. Also, for the static aeroelastic analysis of the wing the use of TSD aerodynamics are justified. The validation of the system includes one of the efficient transformation methods of force and displacement.

• Korean Journal of Optics and Photonics
• /
• v.19 no.5
• /
• pp.360-364
• /
• 2008

The diffraction efficiencies of gratings are affected by the inner structure which is determined by modulation type. CGH (Computer generated Hologram) basically uses the principles of a diffraction grating. As like as the diffraction gratings the patterns recorded in the CGH are different according to modulation methods which result in the performances of the reconstructed images. In this paper, on this fact CGHs are recorded according to sinusoidal and rectangular modulation methods and the characteristics of reconstructed images are analyzed. Also the reconstruction performances of the amplitude and phase, phase-only and binary phase CGH are analyzed.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.16 no.5
• /
• pp.68-77
• /
• 2012

The joint of existing steel grid composite deck is composed of lap splice of reinforcing bar with end hooks and field-placed concrete. In this study, bending tests of deck joint composed of concrete shear key and high tension bolts are carried out for the design variable, concrete shear key strengthened with steel plate or not, and test results are compared with flexural performance of the existing deck joint. Test results showed that the mechanical deck joint has about 30% ~ 60% more ultimate bending strength than the existing joint. According to analysis results of moment-curvature relationship, the initial bending stiffness of the existing deck joint is some higher than that of mechanical joint. But, after crack failure the structural performance of the existing deck joint is rapidly reduced. Furthermore, the deck joint with the strengthened shear key with steel plate has more bending moment capacity than the deck joint without strengthening. And strengthening of shear key has positive influence on the increase of bending stiffness.

• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.5
• /
• pp.142-148
• /
• 2004

In this paper, to detect exciting frequency on the latticed fence structure, fiber optic sensor using Sagnac interferometer was fabricated and tested. The latticed structure fabricated with dimension of 180 cm wide and 180 cm high, the optical fiber, 50 m in length, distributed and fixed on the latticed structure. Single mode fiber, a laser with 1,550 m wavelength, and $3{\times}3$ coupler were used. Excited vibration signal applied to the latticed structure from 200 Hz to 1 KHz. The detected optical signals were compared to the detected acceleration signals and analyzed on the time and frequency domain. Based on the experimental results, fiber optic sensor using Sagnac interferometer detected exciting frequency, effectively. This system can be applied to the structural health monitoring system.