• Korean Journal of Materials Research
• /
• v.10 no.12
• /
• pp.831-837
• /
• 2000

To improve the catalytic activity of platinum on polymer electrolyte fuel cell(PEFC), platinum was alloyed with cobalt and nickel at various temperature. By XRD, it was observed the crystal structure of alloy catalysts were the ordered face centered cubic(f.c.c) due to the superlattice line at $33^{\circ}$. As heat-treatment temperature was increased, the particle size of alloys also were increased and the crystalline lattice parameters were decreased. According to the results from mass activity, specific activity and Tafel slope measured by cell performance test and cyclic voltammogram, the catalyst activities of alloys are higher than that pure platinum.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.17 no.12
• /
• pp.1353-1361
• /
• 1992

Holographic optical element(HOE) is fabricated with the properties of lightweight, thin thickness and interconnectivity for free space. Particularly, HOE for optical interconnection and multiple image processing should have a high efficiency and equal spot intensity, Nonlinear equations for 2-dimensional binary phase grating(BPG) structure is solved by computer simulation based on modified Newton method. Computer-generated pattern drawn by plotter is scaled down and translated into the microfilm. After contact printing between the microfilm and silver halide hologram film, phase diffraction grating produces the $5{\times}5$ multiple spots. Experimental results are shown that bleached phase grating has a high efficiency and equal focused beams except central zero order.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.25 no.1
• /
• pp.11-20
• /
• 1988

From the engineering point of view, a synthesis as well as an analysis technique is explored to search for the improved design of grillage which is common in ship structure. As an approximate analysis method for the grillage, an interaction reaction method is developed and compared with the finite element method. It is found that the discrepancy between these two methods is so negligible that the percent method could be used effectively for the grillage analysis. As an optimization technique, a feasible direction method could be used is combined with the intersection reaction method in order to design a minimum weight optimal grillage. The feasible direction method shows a good numerical performance although it requires more calculation times compared with the direct search method. Finally, the application of multiple objective optimization method to grillage is investigated in order to resolve conflicts existed between the multiple objectives which is a common characteristic of structure design problem. Goal programming method is extended to handle a nonlinear property of constraints and objective functions. It seems that the nonlinear goal programming could help not only to establish a relative importance of each objective, but also enable the designer to choose the best combination of design variables.

• Applied Microscopy
• /
• v.41 no.4
• /
• pp.229-234
• /
• 2011

The occurrence of nuclear inclusions has been reported in various plant groups from primitive ferns to higher flowering plants. Their presence within a group seems to be randomly distributed without any phylogenetic relationships among species. According to the current survey, nuclear inclusions have been widely documented in more than several hundreds of species from various families of plants. The morphology and internal structures of nuclear inclusions are diverse and at least five types of inclusions develop within plant nuclei; amorphous, crystalline, fibrous, lamellar, and tubular form. Among these types, crystalline inclusions are the ones that are the most frequently reported. The inclusions are not bound by membranes and appear to be related to the nucleoli, either spatially by a close association or by an inverse relationship in size during development. The idea that nuclear inclusions are of a proteinaceous nature has been widely accepted. Further link to nucleolar activity as a protein storing site has also been suggested based on the association between the nucleolus and nuclear inclusions. Various investigations of nuclear inclusions have revealed more information about their structural features, but characterizing their precise function and subunit complexity employing molecular analysis and 3-D reconstruction remains to be elucidated. Tilting and tomography of serial sections with appropriate image processing can provide valuable information on their subunit(s). The present review summarizes discussion about different nuclear inclusions in plants from previous works, giving special attention to their fine, ultrastructural morphology, function, and origin.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2007.05a
• /
• pp.1498-1502
• /
• 2007

본 연구에서는 격자기반의 레이더강우 등과 같은 향후 제공될 분포형 강수를 활용하기 위해 국내 유역에서 GIS와 연계한 물리적 기반의 수문학적 분포형모형의 적용성을 검토하고, 향후 저수지 유입량 예측을 위해 수자원공사 현업에서 실시간 물관리에 사용하고 있는 개념적기반의 집중형모형인 Kwater홍수분석모형과 실시간 홍수조절을 목적으로 미국 오클라호마대학의 백스터교 수측에서 개발된 물리적기반의 분포형모형인 Vflo모형을 이용하여 낙동강권역의 남강댐유역을 대상으로 유출해석을 수행하여 양 모형의 구조적인 장단점 등을 비교분석하였다. 입력이 되는 분포형 강우는 지상관측강우, 레이더추정강우를 적용하였고, GIS수문매개변수를 ArcGIS 및 ArcView를 활용하여 DEM, 토지피복도, 토양도 등의 기본 GIS자료들로 부터 추출, 물리적기반의 분포형모형(Vflo)의 입력인자로 사용하여 모형의 초기설정을 향상시켰다. 모형에서 계산된 방법이 물리성을 구비하여 타당한 매개변수의 값으로 현실의 유출량을 재현할 수 있는지를 실제 유역 규모의 스케일로 검증하고자 하였으며 홍수기 댐유역의 유출모의를 위한 모형의 장단점을 파악하고 분포형모형의 향후 실용화 가능성을 검토하였다. 모형 수행 결과, 모형보정은 물리적기반의 분포형모형인 Vflo모형이 집중형모형인 Kwater모형에 비하여 GIS를 이용하여 지형공간 자료와 토양, 토지피복과 같은 물리적 특성을 사용한 모형의 초기 설정을 향상시킴에 따라 평균적으로 첨두유량에서 $\pm254\;cms$, 유출량에서 $\pm14\;mm$, 첨두도달 시간차에서 $\pm15$분 이내의 정확도 향상을 가져왔다. 물리적 기반의 분포형모형인 Vflo모형은 남강댐유역 대다수 관측소에서 별다른 매개변수의 보정없이도 합리적이고 유용한 결과를 보여주었다. 이러한 결과는 GIS와 연계한 물리적기반의 분포형모형이 향후 돌발홍수나 게릴라성 집중호우 등의 악기상에 대응하여 레이더 등의 정확하고 신뢰할만한 강우예측이 입력자료로 생성되었을 때 다목적댐 저수지 운영에 있어서 리드타임을 충분히 확보하여 안정적이고 예측가능한 홍수조절을 수행할 수 있는 가능성을 보여주었다고 사료된다.

• Korean Journal of Materials Research
• /
• v.7 no.8
• /
• pp.694-700
• /
• 1997

TiC(001) 면위에 Mg 금속을 단원자층으로 증착시킨 후 산화 및 열처리 과정을 거쳐서 MgO 초박막을 성장시키고, 성장된 MgO 막의 전자상태 및 표면포논을 UPS, XPS 및 HREELS를 사용하여 측정하였다. 전도성 기판위에 epitaxial 산화물막을 성장시킨 후 성장된 막의 전자구조 및 표면포논을 측정함으로써 벌크에서 분리된 2차원적 특성을 갖는 '표면 모델'의 물성을 연구하고자 하였는데, 이러한 '표면모델'은 잘 배열된 원자구조를 얻을 수 있고 두께가 충분히 얇아서 전하축적을 피할 수 있기 때문이다. 기판으로는 MgO와 같은 암염형 결정구조를 갖고 있고, 격자상수 차이가 2.6% 로서 매우 작으며, 비저항이 매우 낮은 전이 금속 탄화물 중의 하나인 TiC(001) 면을 사용하였다. TiC(001)면에 증착된 MgO층의 UPS He-l 스펙트럼을 측정한 결과 O2p및 XPS스펙트럼은 열처리를 전후로 하여 변하지 않았으며, 이로부터 상온에서 산소의 확산만으로 MgO 상이 형성됨을 알 수 있었다. MgO초박막의 표면 포논을 HREELS를 사용하여 검출하였다. 거시적 포논중에서 F-K 파 및 Rayleigh 모드가 관찰되었는데, F-k파는 MgO막의 2차원성으로 인하여 벌크의 경우보다 높은 진동 에너지를 갖고 있었고 Rayleigh모드는 벌크 MgO와 유사한 분산관계를 보였다. 미시적 포논중에서 Wallis(S/sub 2/)모드가 측정되었는데, 그 진동에너지는 벌크에서와 같고 off-specular방향에서도 소멸되지 않았다.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.11a
• /
• pp.121.1-121.1
• /
• 2011

일반적으로 알콜계 물질은 가스 하이드레이트 형성에 저해제로 사용된다고 알려져 있으나, 최근의 연구를 통해 2-propanol이 일부 조건에서 촉진효과가 나타난다고 보고되고 있다. 본 연구에서는 알콜계 물질인 1-propanol과 2-propanol의 가스 하이드레이트 격자내로의 포집여부와 그로 인한 촉진 혹은 저해 작용 그리고 구조적 특성에 대해 알아보았다. $CO_2$와 $CH_4$ 기체에 대하여 1-propanol 혹은 2-propanol을 첨가하여 형성된 혼합 하이드레이트의 3상평형 기상(V)-물(Lw)-하이드레이트(H))을 측정하였다. 그 결과 $CO_2$의 경우 1-propanol과 2-propanol이 저해 작용을 함을 확인하였으며 농도가 높을수록 저해작용이 커짐을 알 수 있었다. 반면, $CH_4$의 경우 1-propanol에서는 저해 및 촉진효과가 거의 나타나지 않았지만, 2-propanol에서는 촉진효과가 나타났으며 5.6 mol%에서 촉진효과가 가장 크게 나타났다. 혼합 하이드레이트의 구조규명 및 동공 점유 분석을 위해 $^{13}C$ NMR과 XRD분석을 하였으며, 그 결과 2-propanol과 1-propanol을 포함하는 혼합 하이드레이트는 구조 II를 형성하며, 2-propanol과 1-propanol은 큰 동공에 포집되고, 기체는 작은 동공에 포집됨을 확인할 수 있었다. 본 연구의 결과는 알콜계 물질을 첨가제로 사용하는 가스 하이드레이트 공정에서 매우 유용한 기초자료가 될 것으로 사료된다.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.31 no.2
• /
• pp.151-157
• /
• 2013

The law for indicating the address based on the street name has taken effect in 1997. The address based on land-lot number will be changed to the address based on the street name giving odd numbers to the buildings situated on the left side and even numbers to the buildings situated on the right side per street. Searching locations by street name addresses is possible for residential areas, on the other hand, the system of finding locations is insufficient for farmlands, mountains and others, so it is unable to cope with crimes and emergency rescue. In order to make up for the weak points of street name address, the national point number, grid reference system was introduced for finding location of non-residential areas. Therefore, the purpose of this paper is to help the introduction the national point number. In this paper, we proposed a territory-oriented control point and grid range for the national point number. Numbering scheme of grid zone shall be alphanumeric, a two-letter pair Hangul and the grid coordinates in terms of Easting and Northing. We also proposed the notice area for the national point number and location of signs, application about the public and private sector.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.36D no.6
• /
• pp.52-60
• /
• 1999

Fabricability of phase shifted grating filters has been theoretically studied by an effective index transfer matrix method. In the optical band-pass filter with multiple ${\lambda}/4$ phase-shifts, the phase-shift error and random variation of the grating period should be suppressed such that corresponding resonance frequency lies within, the filter pass-band. The tolerance for the relative error is less than $10^3$, and is quite stringent in typical filters for WDM application. End facet reflection produces ripple in the transmission spectra and the reflectivity should be less than 1% in order to keep the ripple less than 0.25dB. Also, the effect of waveguide absorption loss is enhanced by the resonance in the filter, and the absorption should be limited to 1dB/cm for the signal loss of less than 0.2dB.

• The Korean Journal of Applied Statistics
• /
• v.21 no.4
• /
• pp.705-716
• /
• 2008

The objectives of this study are the detection and forecast of climate change signal in the annual mean of surface temperature data, which are generated by MRI/JMA CGCM over the Korean Peninsula. MRI/JMA CGCM outputs consist of control run data(experiment with no change of $CO_2$ concentration) and scenario run data($CO_2$ 1%/year increase experiment to quadrupling) during 142 years for surface temperature and precipitation. And ECMWF reanalysis data during 43 years are used as observations. All data have the same spatial structure which consists of 42 grid points. Two statistical models, the Bayesian fingerprint method and the regression model with autoregressive error(AUTOREG model), are separately applied to detect the climate change signal. The forecasts up to 2100 are generated by the estimated AUTOREG model only for detected grid points.