• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.8 no.3
• /
• pp.246-255
• /
• 1996

A mild slope equation of parabolic type is derived with the revision of the 2nd order differential term and a new approach for the application to large area is presented. The replacement with long waves can overcome the numerical difficulty due to small waves over the system of large grid sizes. No matter how long the replaced wave length is, the refraction and shoaling are maintained by toeing its own wave speed and group velocity, respectively. However, the diffraction effect is modified by means of Eikonal equation. The developed numerical model was applied to the shoal of Ito and Tanimoto (1972) to yield the satisfactory results.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.11a
• /
• pp.329.1-329
• /
• 2002

To detect external vibration signals on the latticed fence structure, distributed fiber optic sensor using Sagnac interferometer was fabricated and tested. The latticed structure fabricated with dimension of 170cm in width and 180cm in height, the optical fiber, 50m in lengtn, distributed and fixed on the latticed structure. It was verified the sensitivity of the Sagnac interferometer using the PZT phase modulator. Fiber-optic external vibration signal applied to the latticed structure from 100㎐ to several ㎑. (omitted)

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2014.10a
• /
• pp.409-410
• /
• 2014

• Proceedings of the IEEK Conference
• /
• 2000.09a
• /
• pp.225-228
• /
• 2000

본 논문에서는 2차의 격자 IIR 노치 필터를 이용하여DS-CDMA 시스템에서 협대역 간섭신호를 제거한다. 본 노치필터는 구조가 간단하고 다양한 간섭 신호 모델에 따라 필터의 계수를 조절할 수 있어 간섭신호의 효과적인 제거가 가능하다. 노치필터의 앞단에는 주파수 추정부를 평행하게 구성하여 간섭신호 주파수의 위치와 파워를 검출한다. 제안된 적응 필터링 알고리듬은 이러한 정보를 이용하여 노치필터의 주파수를 조절하고 간섭 신호의 파워와 대역폭에 따라 노치의 넓이와 깊이를 조절한다. 즉, IIR 노치 필터의 특성을 이론적으로 분석하여 출력 신호대 잡음비를 입력과 필터의 파라미터에 관한 수식으로 유도하였고 이를 이용하여 주어진 입력에 따른 최적의 필터 파라미터를 구하여 적용시키는 것이다. 입력의 간섭 주파수와 파워를 검출하는 방법에는 여 러가지가 있지만 본 논문에서는 비교적 간단한 IIR ALE[6]를 사용하였다. 제안된 알고리듬을 사용한 결과 신호대 잡음비와 에러율에 있어서 FIR 필터를 사용한 기존의 방법[4]에 비하여 좋은 성능을 보임을 알 수 있다.

• Korean Journal of Optics and Photonics
• /
• v.8 no.1
• /
• pp.58-62
• /
• 1997

A new, simple lasing loop configuration employing a fiber grating was proposed and demonstrated for all-optical gain control of erbium-doped fiber amplifier. The lasing loop was designed such that the fiber grating acts as a notch filter to cutoff the lasing light as well as selects the lasing wavelength. The operating gain was clamped to the same level as the loop loss and it could be varied with a tunable directional coupler in the loop. It is believed that this type of gain-controlled erbiumdoped fiber amplifier can have several advantages when used in wavelength-division-multiplexed transmission systems.

• Korean Journal of Optics and Photonics
• /
• v.33 no.1
• /
• pp.22-27
• /
• 2022

We fabricate a polarization-independent dielectric multilayer thin-film diffraction grating for a spectral-beam-combining (SBC) system with a simple grating structure and low aspect ratio. Due to the refractive index and thickness error of the manufactured thin films, the diffraction efficiency of the fabricated diffraction grating was lower than that of the design. The causes of the errors were analyzed, and it was confirmed through simulation that diffraction efficiency could be compensated through an additional coating on the manufactured diffraction grating. As a result of sputtering an additional Ta₂O₅ layer on a fabricated diffraction grating, the diffraction efficiency was corrected and a maximum 91.7% of polarization-independent diffraction efficiency was obtained.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.33 no.4
• /
• pp.35-40
• /
• 2005

There are many methods to reinforce the cylindrical structure for light weight design like skin-stringer and semi-monocoque. Isogrid is one of the reinforced structures to improve buckling load. Isogrid has many advantages for complex load case, internal pressure and concentrated load.In this paper, compressive buckling test and non-linear FE analysis of the isogrid panel are described. Diameter of panel is 2.4m and thickness of plate is 11.43mm. The angle which the panel accomplish is about 70 degrees and, its height is about 660mm. Local buckling, global buckling and variation of stiffness after local buckling were observed during buckling test of the panel. MSC/MARC is used for non-linear FE analysis. When analysis, initial imperfection of panel which occurred during plastic forming is considered. The results of analysis for buckling mode and buckling load have good agreements with test.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.3 no.1
• /
• pp.137-146
• /
• 1999

Analysis of R/C columns requires modeling of the plastic hinge region, as well as nonlinear material characteristics. This becomes a challenging task in view of the nonlinearity of both steel and concrete. Furthermore, formation and progression of plasticity in the hinge is a difficult phenomenan to simulate, especially under reversed cyclic loading and decaying strength conditions. This research provide one analytical model employed in column analysis, including the analysis procedure for establishing inelastic force-deformation relationships. The analytical results show good correlation with experimental data. The employed procedure with the adopted analytical models can be used to compute inelastic displacements of concrete columns with welded reinforcement grids. The inelastic deformability beyond the peak was similar to those indicated by columns with conventional ties. The superior performance of columns with welded grids may be attributed to the improved confinement characteristics of grids associated with increased rigidity of welded ties.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2008.05a
• /
• pp.664-668
• /
• 2008

본 연구에서는 비정상상태 자유수면 모의를 위해 2차원 유한체적법을 이용한 수치모형을 개발하였으며, 이론적인 해석해 및 수리실험을 통한 실측자료를 이용하여 검증하였다. 개발된 모형은 지배방정식으로 비선형 및 보존형 2차원 천수방정식(shallow water equation)을 이용하였으며, 동적메모리 할당 기능이 포함된 Fortran-90으로 코딩되었다. 또한 구조화된 격자 및 비구조화 격자 시스템에도 적용될 수 있도록 모형을 구성하였으며, 불규칙한 하상지형에 의해 수치진동을 감소시키기 위해 본 모형에 well-balanced HLLC 기법을 적용하였다. 모형의 적용성을 검증하기 위하여 1차원의 경우 젖은/마른 하상 조건하에서의 댐 붕괴파 문제와 하상이 변화하는 지형 구간을 통과할 때 발생되는 천이류에 대한 문제 그리고 시간에 따라 변화하는 수위와 지형 조건에서의 wetting & drying에 대한 문제에 적용하였으며, 2차원의 경우 전통적인 댐 붕괴파 문제 및 구조물에 미치는 댐 붕괴파의 영향에 대한 수리모형실험을 통한 실측자료를 이용하여 검증하였다. 검증결과 본 모형을 통해 계산된 수치해는 이론적인 해석해와 실측자료에 거의 정확히 일치하였으며, 향후 실제 하천 자료를 이용하여 모형의 현장 적용성을 검증할 것이다.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.37 no.12
• /
• pp.35-42
• /
• 2000

A new dynamic passband filter enable to control the bandwidth using converging readout beam in photorefractive diffraction grating with high-efficiency is proposed and experimentally demonstrated. In this proposed scheme, the 3dB passband of a volume grating in crystal is theoretically predicted and the experimental results are obtained in consistent with our derivation that the bandwidth is controlled from 0.35nm to 3.3nm at the center wavelength of 670. 1nm.