• Proceedings of the Korea Water Resources Association Conference
• /
• 2008.05a
• /
• pp.664-668
• /
• 2008

본 연구에서는 비정상상태 자유수면 모의를 위해 2차원 유한체적법을 이용한 수치모형을 개발하였으며, 이론적인 해석해 및 수리실험을 통한 실측자료를 이용하여 검증하였다. 개발된 모형은 지배방정식으로 비선형 및 보존형 2차원 천수방정식(shallow water equation)을 이용하였으며, 동적메모리 할당 기능이 포함된 Fortran-90으로 코딩되었다. 또한 구조화된 격자 및 비구조화 격자 시스템에도 적용될 수 있도록 모형을 구성하였으며, 불규칙한 하상지형에 의해 수치진동을 감소시키기 위해 본 모형에 well-balanced HLLC 기법을 적용하였다. 모형의 적용성을 검증하기 위하여 1차원의 경우 젖은/마른 하상 조건하에서의 댐 붕괴파 문제와 하상이 변화하는 지형 구간을 통과할 때 발생되는 천이류에 대한 문제 그리고 시간에 따라 변화하는 수위와 지형 조건에서의 wetting & drying에 대한 문제에 적용하였으며, 2차원의 경우 전통적인 댐 붕괴파 문제 및 구조물에 미치는 댐 붕괴파의 영향에 대한 수리모형실험을 통한 실측자료를 이용하여 검증하였다. 검증결과 본 모형을 통해 계산된 수치해는 이론적인 해석해와 실측자료에 거의 정확히 일치하였으며, 향후 실제 하천 자료를 이용하여 모형의 현장 적용성을 검증할 것이다.

• Proceeding of EDISON Challenge
• /
• 2013.04a
• /
• pp.349-353
• /
• 2013

공동주위의 유동에 대한 연구결과를 보면 개방형 공동(L/D<10)과 밀폐형 공동(L/D>13)으로 구별하는 데 개방형 공동은 앞전에서 발생한 자유전단층이 뒷전 부근에 재부착하여 공동을 완전히 연결하므로, 자유전단층과 외부유동과의 상호작용으로 발생하는 심한 압력변화에 의해 진동현상이 나타나게 된다. 이것은 큰 소음을 유발하고, 구조물의 고장 혹은 파괴의 원인이 되기도 하고, 공력 성능 및 안정성에 해를 주고 민감한 계기를 손상 시킬 수도 있다. 본 논문에서는 공동을 연구하기 위해 EDISON_CFD를 사용하여 공동의 시뮬레이션하기 위해 격자를 구성하고 세장비를 각각 1/5, 1/3, 1/2, 1, 2, 5 로 변화를 주어 M=1.5 일 때 밀도, 압력, 마하수와 유동구조를 세장비에 따라 결과를 비교, 분석한다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1997.04a
• /
• pp.169-175
• /
• 1997

Recently it is increased by degrees to produce complex and large lattice structures such as bridge, tower, crane, and space structures. In general, in order to analyse these structures we have used finite element method(FEM). In this method, however, it is necessary to use a large amount of computer memory and to take long computation time. For overcoming this problem, the Authors have developed the transfer dynamic stiffness coefficient method(TDSCM) which consists on the concept of the substructure synthesis method and transfer influence coefficient method. In this paper, the new free vibration analysis method for large type lattice structure is formulated by the TDSCM. And the results obtained by TDSCM are compared with those obtained by FEM, transfer matrix method and experiment. And it is confirmed for TDSCM to be the numerical high accuracy and high speed structure analysis method.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1997.10a
• /
• pp.190-195
• /
• 1997

Recently it is increased by degrees to construct complex or large lattice type structures such as bridges, towers, cranes, and structures that can be used for space technology. In general, in order to analyze, these structures we have used the finite element method(FEM). In this method, however, it is necessary to use a large amount of computer memory and computation time because the FEM requires many degrees of freedom for solving dynamic problems for these structures. For overcoming this problem, the authors have developed the transfer dynamic stiffness coefficient method(TDSCM). This method is based on the concepts of the transfer and the synthesis of the dynamic stiffness coefficient which is related to force and displacement vector at each node. In this paper, the authors formulate vibration analysis algorithm for a complex and large lattice type structure using the transfer of the dynamic stiffness coefficient. And the validity of TDSCM demonstrated through numerical computational and experimental results.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.33 no.3
• /
• pp.93-100
• /
• 2021

Since the IB (Immersed Boundary) method, which can perform coupling analysis with objects and fluids having an impermeable boundary of arbitrary shape on a fixed grid system, has been developed, the IB method in various CFD models is increasing. The representative IB methods are the directing-forcing method and the ghost cell method. The directing-forcing type method numerically satisfies the boundary condition from the fluid force calculated at the boundary surface of the structure, and the ghost-cell type method is a computational method that satisfies the boundary condition through interpolation by placing a virtual cell inside the obstacle. These IB methods have a disadvantage in that the computational algorithm is complex. In this study, the simplified immersed boundary (SIB) method enables the analysis of temporary structures on a fixed grid system and is easy to expand to three proposed dimensions. The SIB method proposed in this study is based on a one-field model for immiscible two-phase fluid that assumes that the density function of each phase moves with the center of local mass. In addition, the volume-weighted average method using the density function of the solid was applied to handle moving solid structures, and the CIP method was applied to the advection calculation to prevent numerical diffusion. To examine the analysis performance of the proposed SIB method, a numerical simulation was performed on an object falling to the free water surface. The numerical analysis result reproduced the object falling to the free water surface well.

• Computational Structural Engineering
• /
• v.5 no.3
• /
• pp.105-112
• /
• 1992

The design of reactor internals requires the accurate vibration characteristics of each component for subsequent dynamic structural response analysis. For Korean standard nuclear power plant some modifications on the Control Element Assembly shroud from the reference design have been made. Since the shroud is complex in geometry having an array of vertical round tubes and webs in a square grid pattern, and being tied down by preloaded tie rods into position, it is planned to perform a vibration measurement program consisting of both experimental and analytical modal studies upon that component. To determine the proper test conditions, the pre-test analysis has been performed using the general purpose structural analysis program ANSYS. Also the effects of the number of master degrees of freedom, holes in the web and tie-rod preload on the natural frequencies are examined prior to the pre-test analysis. After decision of appropriate finite element model, frequency analysis and harmonic analysis are performed and ideas for the test conditions such as the number of measurement points, their locations, measurement frequency range and the excitation force level are determined.

• Journal of Korea Water Resources Association
• /
• v.40 no.4
• /
• pp.313-324
• /
• 2007

An irregular cell-based numerical model was developed to analyze underground space flooding. In this model, the flow characteristics in underground space were computed by link-node system. Also, the model can simulate the underground flood flow related to the influence of stairs and wall-structures. Empirical discharge formula were introduced to analyze weir-type flow for shopping mall, and channel-type flow for subway railroad respectively. The simulated results matched in reasonable range compared with the observed depth. The dual-drainage inundation analysis model and the underground space flood analysis model were integrated using visual basic application of ArcGIS system. The developed model can help the decision support system of flood control authority for redesigning and constructing flood prevention structures and making the potential inundation zone, and establishing flood-mitigation measures.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.51 no.2
• /
• pp.15-27
• /
• 2009

토지이용변화가 수질에 미치는 영향을 평가하기 위하여 비점오염모형이 광범위하게 사용되고 있다. 본 연구에서는 최적관리기법이 수문 수질에 미치는 영향을 평가하기위한 통합모형시스템을 개발하였다. 통합모형시스템은 DANSAT (Dynamic Agricultural Non-point Source Assessment Tool)과 사용자 인터페이스로 구성되어 있다. DANSAT은 분포형 연속 강우사상 모형으로서 농업소유역에서의 유출량, 유사량, 농약 물질의 이동기작 등을 모의한다. DANSAT은 크게 동적변수 부모형, 수문 부모형, 유사 이용 부모형, 농약 물질 이동 부모형등 4개의 부모형으로 구성되어있다. 동적변수 부모형은 토양의 특성, 작물의 생장 및 작물 잔여물질의 분해 등을 모의하는 하부모형으로 구성되어있으며, 토지 이용 변화에 관계되는 내부 변수들의 시간적 변화를 모의한다. 수문 부모형은 차단, 증발산량, 침투량, 침루량 등을 모의하는 격자 단위 프로세스와 지표유출, 중간유출, 기저유출 및 하천에서의 물의 이동을 모의하는 유역 단위 프로세스로 구성되어있다. 유사 이동 부모형은 세류간 (interrill) 토양입자의 분리, 세류 (rill) 및 하천내의 토양분리, 운송가능량 등을 모의하며, 농약 물질 이동 부모형은 농약의 분해, 평형, 식물에 의한 흡수, 침출 등을 고려하여 농약 물질의 이동을 모의한다. 입력변수는 최적관리기법의 시 공간적인 변화를 고려할 수 있도록 계층구조로 구성하였다. 유역출구에서의 결과 출력 뿐만 아니라, 유역전체에 걸쳐 지표면과 지하수면 사이에서 물 및 오염물질의 이동량 분석을 위한 출력 및 격자단위의 상세 결과 출력을 통하여 최적관리기법을 평가하고 분석할 수 있다. 한편, 사용자 인터페이스는 모형의 구동을 위해 요구되는 광범위한 시 공간 입력 자료를 기존에 존재하는 데이터베이스를 이용하여 생성할 수 있도록 개발되었다.

• Computational Structural Engineering
• /
• v.5 no.4
• /
• pp.93-102
• /
• 1992

The design of reactor internals requires the accurate vibration characteristics of each component for subsequent dynamic structural response analyses. For Korean standard nuclear power plant some modifications on the Control Element Assembly shroud from the reference design have been made, Since the shroud is complex in geometry having an array of vertical round tubes and webs in a square grid pattern, and being tied down by preloaded tie rods into position, it is planned to perform a vibration measurement program consisting of both experimental and analytical modal studies upon that component. The shroud modal testing was performed on the low frequency global survey to measure the first several modes. The analysis using the finite element model was also performed for the as-tested conditions. The natural frequencies and mode shapes from both test and analysis have been acquired and compared to be in good agreement. It is concluded that finite element model generated is good enough to be used in the design for the dynamic response analysis under various loading conditions.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.33 no.4
• /
• pp.35-40
• /
• 2005

There are many methods to reinforce the cylindrical structure for light weight design like skin-stringer and semi-monocoque. Isogrid is one of the reinforced structures to improve buckling load. Isogrid has many advantages for complex load case, internal pressure and concentrated load.In this paper, compressive buckling test and non-linear FE analysis of the isogrid panel are described. Diameter of panel is 2.4m and thickness of plate is 11.43mm. The angle which the panel accomplish is about 70 degrees and, its height is about 660mm. Local buckling, global buckling and variation of stiffness after local buckling were observed during buckling test of the panel. MSC/MARC is used for non-linear FE analysis. When analysis, initial imperfection of panel which occurred during plastic forming is considered. The results of analysis for buckling mode and buckling load have good agreements with test.