• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.10
• /
• pp.1048-1053
• /
• 2002

In this paper, thin film bulk acoustic resonator(TFBAR) lattice and balanced type filter topologies are designed and fabricated. Aluminium nitride and platinum are used for piezoelectric material and top and bottom electrodes, respectively. Air-gap is placed to avoid silicon substrate loading effect and the performance of these lattice and balanced filters is compared with ladder filters. These filters have selectivity over 15 dB for lattice type and 30 dB for balanced type and reveal wider bandwidth of the ladder filters. For balanced type filters, minor tuning procedure is not needed and they are readily available for RF filter in wireless applications.

• Journal of the Mineralogical Society of Korea
• /
• v.13 no.2
• /
• pp.96-114
• /
• 2000

춘천 연옥은 색깔에 따라 세가지 유형 (연녹색, 암녹색, 및 회색 연옥)으로 구분되고 이들은 각기 서로 다른 조직과 조성을 나타낸다. 연녹색 연옥이 이중에서 가장 일반적인 유형이다. 연옥은 주로 극미립의 연옥질 투각섬석으로 구성되고 여기에 미량의 휘석, Mg-녹니석 및 방해석이 불순물로서 수반된다. 연옥질 투각섬석 결정들은 그 폭이 5$\mu\textrm{m}$ 이하의 극미립질 침상 결정형을 이루며 서로 치밀하게 얽혀있는 연옥 특유의 조직을 나타낸다. 주사전자현미경 하에서 (110)의 벽개면의 발달이 현저하고, 주사탐침현미경 하에서는 벽개면을 가로지르는 방향으로 특징적인 조선이 나타나는 것이 특징이다. 연옥질 투각섬석은 투과전자현미경 하에서 흔히 단쇄형과 복쇄형이 결합한 3중쇄형 격자가 복쇄형의 투각섬석 구조 내에서 불규칙적으로 협재되는 혼성격자 구조가 발달하는 것이 특징이다. 드물지만 5중쇄형 격자와 4중쇄형 격자도 관찰되는데, 이 같은 불규칙한 격자 혼재상은 회색 연옥에서 보다 현저한 경향을 보인다. 이와 같은 혼성격자 구조형의 존재는 춘천 연옥이 열역학적으로 비평형 상태에서 형성되었음을 시사하는 것으로 여겨진다. 리트벨트법에 의한 구조검증을 통해서 구해진 연옥질 투각섬석들의 격자상수 값들은 X-선회절의 경우, a=9.837(1)~9.9804(4)$\AA$, b=18.046(2)~18.062(1)$\AA$. c=5.2765(7)~5.2803(3)$\AA$, $\beta$=104.717(9)~104.786(3)$^{\circ}$로 계산되었다. 이에 비해서 중성자 회절법에 의해서 측정되 격자 상수 값은 a=9.8841(6)~9.8933(7)$\AA$, b=18.1429(7)~18.161(2)$\AA$, c=5.3024(3)~5.3060(7)$\AA$, $\beta$=104.698(7)~104.771(4)$^{\circ}$로서 X-선회절에 의한 값들과 약간의 차이를 보인다. 연옥질 투각섬석은 Ca에 대한 Mg의 치환에 의해 M(4) 자라의 크기가 작아지면서 b축의 단위포도 함께 줄어드는 결정화학적 특징을 나타낸다. 이는 중성자 회절분석에 의해서 구해진 M(4)의 자리점유율과 M(4)-O의 원자간 거리에 의해서도 확인된다. 그러나 연옥질 투각섬석에 대한 리트벨트법에 구조검증 결과는 연옥의 유형별 미시적 광물상과 혼성격자 구조형의 특징에 별다른 연계성이 없는 것으로 나타났다.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.15 no.4
• /
• pp.175-184
• /
• 2011

To take advantage of reduced on-site construction periods and minimize traffic impacts various types of steel grid composite deck have been developed since 1930's. Modular prefabricated unfilled grid decks permit a long-distance transportation and construction under unfavorable condition, for example, in mountainous regions due to its comparatively light-weighter structure than fully filled grid deck. In this study bending tests of unfilled grid decks for the deck member of various kinds of infrastructure are carried out, bending strength and behaviour of composite action are experimentally evaluated. In this bending test, design variables are considered, such as type of shear connection between steel grid and concrete slab, spacing between cross bars and thickness of concrete slab. Through test results bending strength and behaviour of composite action are evaluated, reference data for proper type of shear connection and other details of the deck, such as spacing between cross bars, are obtained.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.19 no.3
• /
• pp.173-178
• /
• 2019

To analyze the diffraction properties of optical signals by periodic blazed 2D diffraction gratings, Toeplitz dielectric tensor is first defined and formulated by 2D spatial Fourier expansions associated with asymmetric blazed grating profile. The characteristic modes in each layer is then based on eigenvalue problem, and the complete solution is found rigorously in terms of modal transmission-line theory (MTLT) to address the pertinent boundary-value problems. Toeplitz matrix of symmetric and sawtooth profiles is derived from that of asymmetric blazed grating profile, and the diffraction properties for each profile are numerically simulated. The numerical results reveal that the asymmetric and symmetric profiles behave as anti-reflection GMR filter while the sawtooth profile works better as anti-transmission one rather than anti-reflection filter.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.19 no.5
• /
• pp.175-180
• /
• 2019

The optical characteristics and power transfers between guiding channels of blazed grating-assisted directional coupler (B-GADC) are evaluated in detail by using novel and rigorous modal transmission-line theory (MTLT) based on eigenvalue problem. To evaluate the coupling efficiency of B-GADC, the dispersion curves as a function of the grating period and wavelength are analyzed numerically for quasi-TE and quasi-TM modes. Furthermore, symmetric, sawtooth and asymmetric grating profiles are considered to know the effect of blazing characteristics on power transfer of GADC. The numerical results show that the grating period for minimum-gap condition to obtain maximum power transfer decreases gradually as the blazed structure changes from symmetric to asymmetric profile. On the other hand, the coupling length increases reversely.

• Composites Research
• /
• v.30 no.6
• /
• pp.338-342
• /
• 2017

In this paper, evaluation method of structural integrity of cylindrical composite lattice structures was conducted. A finite element analysis was used to evaluate the structural integrity of composite lattice structures. In order to verify the optimal finite element in the evaluation of the structural integrity, finite element models for cylindrical composite lattice structure were generated using beam, shell and solid elements. The results of the finite element analyses with the shell and solid element models showed a good agreement. However, considerable differences were found between the beam element model and the shell and solid models. This occurred because the beam element does not take into account the degradation of the mechanical properties of the non-intersection parts of cylindrical composite lattice structures. It was found that the finite element analysis of evaluation of structural integrity for cylindrical composite lattice structures have to use solid element.

• Journal of Korean Association for Spatial Structures
• /
• v.4 no.2 s.12
• /
• pp.99-105
• /
• 2004

The structure systems with non-rigid member were classified by the composition type of line and surface members. As a result of the classification, there are 1-way cable structure, cable net and radial cable net structure in the line member system. And there are pneumatic structure and suspension membrane structure in surface member system. In addition, when the line and surface members are composed together, there is the hybrid membrane system which are divided into hanging type and supported type. In this paper, the Korean terms of structure systems with non-rigid member are recommended through this classification.

• Journal of the Korean Society for Precision Engineering
• /
• v.9 no.3
• /
• pp.165-171
• /
• 1992

진동하는 구조물을 설계할 때에는 그 구조물 중의 Strain이나 응력이 최대가 되는 장소나 시각을 알 필요가 있다. 지금까지의 Strain 해석에는 Strain gauge 등과 같은 접촉법이 많이 이용되고 있다. 더우기, 접촉법으로 대변형 진동을 하는 물체의 Strain을 해석하는 것은 곤란하다. 최근에는 비접촉법으로 Strain 분포를 해석하기 위해 화상처리를 이용한 계측이 행하여지고 있다. 이들의 Strain 분포를 측정하는 광학적인 방법으로는 격자법, Moire법, 홀로 그랩픽 간섭법 등이 있다. 특히 대변형이나 대Strain을 해석하는 데에는 격자법이 많이 이용되고 있는데, 종래의 격자법은 Data를 처리하는 데에 많은 시간과 노력이 소요되고 작업도 매우 복잡하며, Data의 수도 제한이 되어서 구조물의 분포의 해석 정도에 큰 영향을 미치게 된다. 본 논문 에서는 스테레오법을 이용해서 2차원 격자를 붙인 시료표면의 각 점의 3차원 좌표를 계측하고, 또 Fourier 변환 격자법을 적용하여 촬영된 2차원 격자의 화상에서 위상치를 구한다. 그리고 물체의 변형 전후의 대응 관계의 화상에서 3차원 형상과 Strain 분포를 해석하는 방법을 제안한다. 이 방법을 이용하면 진동하는 구조 물의 3차원 변위분포, Strain 분포를 정도 좋게 해석할 수가 있다.

• Journal of Korean Association for Spatial Structures
• /
• v.4 no.3 s.13
• /
• pp.93-101
• /
• 2004

Structural systems have a lot of architectural meaning concerning historical context of structural technology. Therefore, surveying constructed examples and their constructed year, the character and development of various formations of structure systems with non-rigid member were investigated. At the result, the early modem structure systems with non-rigid member were made up from the cable structures, then membrane structures have mainly used after 1970's. The early structural systems had intended to make the large scale space, after 1970's, they have been adopted into the smaller scale space structure, and cable net structure, pneumatic structure and dome typed hybrid membrane system tend to compose the larger scale spare structure.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.15 no.2
• /
• pp.221-227
• /
• 2015

The polarization characteristics of nano-scale grating-assisted polarization-insensitive coupler (GA-PIC) consisted of double sandwiched rib-type layers are evaluated in detail by using modal transmission-line theory (MTLT) based on equivalent network. To obtain the polarization-insensitive condition of GA-PIC, the coupling lengths as a function of the refractive index and thickness of sandwiched rib-type layer as well as the grating thickness and period are analyzed for quasi-TE and quasi-TM modes. The numerical results show that the GA-PIC with hundreds of nanometer scale is realized by properly choosing structural and material parameters of double sandwiched layers and grating.