• Korean Journal of Optics and Photonics
• /
• v.9 no.1
• /
• pp.9-14
• /
• 1998

We present a simple method of determining the absolute order of moire fringes formed by the moire shadow topography with a criss-crossed grating. Two experimental methods in this topography are proposed and demonstrated; one is to change the ratio of x and y pitches in a criss-crossed grating after fixing the position of a light source and a camera, and the other is to change the position of a light source and a camera after fixing the ratio of x and y pitches in a criss-crossed grating.

• Korean Journal of Optics and Photonics
• /
• v.4 no.1
• /
• pp.36-46
• /
• 1993

The formula of the diffraction patterns which were made by the grating with the variable periods were derived. The diffraction patterns which had the various data value of the variable periods were simulated by the IBM PC., and the characteristics of the patterns were discussed. The purposes of this study was to find the periods of the real grating and their degree of variation by using the results of the experiment.

• Journal of The Korean Digital Architecture Interior Association
• /
• v.10 no.3
• /
• pp.29-38
• /
• 2010

르네상스 시대의 필리포 브뤼넬레치, 19세기의 쟝 니꼴라 루이 뒤랑, 근대 건축의 꾸르뷔지에, 귀세프 테라니, 밀르벤 데르호흐, 그리고 현대건축의 장 누벨과 같은 5명의 건축가의 예를 통해, 건축에서 늘 되풀이되어 나타나는 기하학적 형체로서의 이 격자무늬는 자신의 다면성을 보여준다. 합리적인 면은 그대로 간직한 채, 격자무늬는 순서대로, 균형잡힌 비율의 선, 축에 관한 구성체계, 조립식 건축의 구조, 합리주의의 상징, 건물의 배치와 크기를 결정하는 반복적인 조직망, 삼차원 공간에서의 프랙탈한 이미지로서 나타난다.

• Proceedings of the Optical Society of Korea Conference
• /
• 2003.07a
• /
• pp.276-277
• /
• 2003

계측분야에서 물체의 변형정도를 알아내는 광학적인 방법으로 물체에 격자를 부착하여 격자의 변위에 의한 무아레 무늬(moir fringes)를 이용하여 물체의 변형정도를 알아내는 방법이 있다. 최근에 본 그룹에서 물체의 변형정도를 피치간격으로 측정할 수 있고, 한 피치 내의 세밀한 부분은 유사한 두 개의 격자가 겹쳐서 형성되는 버니어 무아레 무늬를 이용하여 세부적인 변위 정도를 알아낼 수 있는 방법을 제안하였다. (중략)

• Korean Journal of Optics and Photonics
• /
• v.27 no.2
• /
• pp.67-72
• /
• 2016

In projection moire topography, the investigation of fringe sensitivity, which means the change rate of fringe order according to object height, is important and necessary to reduce the measurement error of the shape of an object. Using the fringe sensitivity, the determination of the absolute orders of moire fringes can be performed very easily and rapidly. The important parameters in the determination of absolute orders of fringes are the positions of light source and object, and the grating period in projection moire topography. Among these parameters, the fringe sensitivity due to the transverse motion of the light source and the longitudinal motion of the object according to grating periods are analyzed and compared. As a result, whereas the fringe sensitivity in the transverse-motion method increases linearly and gradually as the distance between light source and imaging sensor increases, the fringe sensitivity due to the longitudinal-motion method decreases dramatically as the distance between imaging lens and object increases. In these methods, the fringe sensitivity and its change increase as the grating period increases.

• Korean Journal of Optics and Photonics
• /
• v.15 no.5
• /
• pp.435-442
• /
• 2004

We obtained precise linear transverse displacements from the results of signal processing on moire fringes measured by the superposition of a fixed self-imaging elongated circular(EC) grating and a moved EC grating. The linear displacement less than one pitch of the moving EC grating was calculated from the position of a bright moire fringe generated on the linear grating part of the EC gratings. The moire signals were high-frequency-filtered, smoothed, curve-fitted, and first-differentiated moire signals in sequence. Also the linear displacement created by movement by the unit of integer times of a pitch was readily measured by the count of the even number of zero-crossing points corresponding to bright moire fringes obtained by the above same processing without curve fitting. Then we can measure linear transverse displacements with the accuracy of better than 3 %, which are more accurate values than those by the traditional visual method within the displacement of 80 ${\mu}{\textrm}{m}$.

• Korean Journal of Optics and Photonics
• /
• v.19 no.4
• /
• pp.302-309
• /
• 2008

We present the precise visual measurement method of rotational displacements using two different moire fringes simultaneously generated by repeated sinusoidal gratings. We investigate the variation of moire fringes depending on rotational displacements through computer simulation and experiment using a rotator in detail. The moire fringes are composed of the wide linear fringe part with a long period and the narrow linear fringe part with a short period. These parts are superior to the angle detection of more than 12 degrees and less than 12 degree, respectively. Additionally, the method can be visually used in the determination of the rotational direction by observing the moire fringe's direction.

• Journal of Korean Ophthalmic Optics Society
• /
• v.5 no.2
• /
• pp.181-186
• /
• 2000

The setup of the moir$\acute{e}$ deflectometry using the virtual grating was done, so the convergence and divergence of a pencil of ray was determined. The light source was He-Ne laser(3mW). The focal length of the first lens, the second lens being 18 mm, 250 mm respectively was used for the setup of the beam expander. The optics of the moir$\acute{e}$ deflectometry determining the vergence was used a diffraction grating(pitch = $1.6{\mu}m/line$) and a front flat reflection mirror. The effective focal length of the trial lens set was measured and compared with the theoretical value.

• Proceedings of the Optical Society of Korea Conference
• /
• 2002.07a
• /
• pp.202-203
• /
• 2002

무아레 무늬는 주기적인 두 격자에 비간섭성 광원을 사용하여 얻을 수 있으며, 격자의 모양에 따라 측정 물체의 병진 운동 및 회전 운동 측정이 가능하다. 무아레 기술은 비접촉식 측정 방법으로 실험 장치가 단순하여 물체의 3차원 형상 측정[1], 진동 및 응력 측정[2], 매질의 굴절률 측정[3], 회전각 측정[4] 등과 같은 많은 분야에 응용할 수 있다. 무아레 무늬는 발생 방법에 따라 그림자식과 영사식으로 나뉘며, 영사식은 격자를 측정면에 투영시키는 방법으로 그림자식과 비교하여 격자보다 상대적으로 큰 물체도 측정할 수 있다. (중략)

• Korean Journal of Optics and Photonics
• /
• v.3 no.3
• /
• pp.155-160
• /
• 1992

1)iscussed in this paper are the effects of phase modulation on the line spread functions (LSF) and MTFs of ;I binocular objective system. The binocular objective lens is made in Korea. It has rotationally symmetric aberrations. The LSFs and MTFs are measured experimentally. The phase modulation is carried out by applying phase retardation n on the aperture. The area where the phase is not retarded presents a double annular type. The OTF curves of phase modulated aperture are compared with that of unmodulated aperture. The comparison shows that there is the aberration compensation effect in aberration loaded system. Therefore the performance of many optical system can be improved without any loss of light energy by properly modulating the phase on the aperture.