• Proceedings of the Korea Water Resources Association Conference
• /
• 2016.05a
• /
• pp.93-93
• /
• 2016

최근 증가하고 있는 기후변화에 의해 설계빈도를 상회하는 강우의 발생빈도가 증가하고 있으며, 이로 인한 도시유역의 내수범람 피해가 증가하고 있다. 도시유역에서 발생하는 침수 피해의 경우 인적 물적 자원이 집중되어 있는 도시의 특성으로 인해 침수로 인한 직접적 피해 규모가 상당할 뿐만 아니라 침수 발생 후 세균 및 박테리아에 의해 발생하는 수인성 전염병의 유행 등과 같은 2차적 피해 또한 심각한 사회적 비용을 초래할 수 있어 도시유역의 침수 피해를 저감시키기 위한 대책이 절실히 요구되어지고 있다. 도시유역의 침수를 예방하기 위한 대책은 구조적 비구조적 대책으로 구분되어 질 수 있으며 구조적 대책의 경우 침수 피해 예방에 직접적인 효과를 낼 수 있다는 장점이 있으나 대규모 사업예산 및 사업 기간으로 인해 직접적 효과를 보기까지 상대적으로 긴 시간이 필요할 뿐만 아니라 사업 진행 중 대상지역 거주민들의 민원으로 인한 갈등 조정 등으로 인해 사업실행에 어려움을 겪고 있다. 이러한 측면에서 비구조적 대책의 일환인 수치해석을 통한 침수피해 재현 및 침수원인 파악을 통한 구조개선 제안은 구조적 대책의 단점을 보완할 수있는 좋은 대안이 될 수 있다. 도시유역의 경우 비도시유역과 대조적인 차이점으로는 높은 비율의 불투수층, 복잡한 지형, 다수의 인공 구조물 및 배수관망 시스템 등을 들 수 있으며, 침수해석 모형의 정확도를 높이기 위해서는 복잡한 지형의 효율적인 처리가 무엇보다 중요하다. 일반적으로 이용되는 2차원 침수해석 모형들은 직교구조 격자 또는 비구조 격자를 이용하여 지형을 묘사하고 있으며 DEM 자료를 직접 사용하는 직교구조 격자의 경우 지형 데이터 생성이 상대적으로 쉽다는 장점이 있으나 복잡한 지형을 표현하기 위해서는 불필요한 지역까지 높은 해상도를 이용해야 하며 이로 인하여 모의시간이 지나치게 길어지는 문제점이 발생한다. 비구조 격자의 경우 상대적으로 복잡한 도시 유역을 잘 묘사할 수 있다는 장점이 있으나 격자망 생성에 필요한 데이터가 많고 격자망 생성에 지나치게 많은 시간과 노력이 소요된다는 단점이 있다. 따라서 본 연구에서는 위에서 언급한 두 가지 방법의 장점만을 취할 수 있도록 메쉬 세분화 기법을 이용한 2차원 침수해석 모형을 개발 하여 복잡한 지형은 고해상도 메쉬를 이용하여 보다 자세히 묘사하고 상대적으로 복잡하지 않은 지형은 저해상도 메쉬를 이용하여 계산시간을 단축시킬 수 있도록 하였다. 수치해석 기법으로는 엇갈림 격자를 이용하는 Leap-Frog 기법과 유한차분 (Finite difference Method)기법을 이용하였다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2009.10a
• /
• pp.599-600
• /
• 2009

• Tunnel and Underground Space
• /
• v.17 no.5
• /
• pp.350-359
• /
• 2007

Most large cut slopes of open pit mines, roadways, and railways are steeply inclined and composed with rocks that do not contain soils. However, these rock slopes suffer both weathering and fragmentation. In the case of steep slopes, falling rock and collapse of a slope may often occur due to surface erosion. Cast-in place concrete and rubble work are the most widely used earth structure-based pressure supports that act as restraints against the collapse of the rock slope. In order to overcome the shortcomings of conventional retaining walls, a segmental grid retaining wall is being used with connects precasted segments to construct the wall. In this study, laboratory model test was conducted to estimate deformation behavior of segmental grid retaining wall with configuration of rear strecher, height and inclination of the wall. In order to examine the behavior characteristics of a segmental grid retaining wall, this research analyzes the aspects of spacial displacement through relative displacement according to change in the inclination of the wall. Also, the walls behavior according to the formation and status of the rear stretcher which serves the role of transferring the load from the header and the stretcher which make up the wall, the displacement of backfill materials in the wall, and the location of the maximum load were surveyed and the characteristics of displacement in the segmental grid retaining wall were observed. The test results of the segmental grid retaining wall showed that there was a sudden increase in failure load according to the decrease in the wall's height and the size of the in was greatly decreased. Furthermore, it revealed that with identical inclination and height, the structure of the rear stitcher did not greatly affect the starting point or size of maximum horizontal displacement, but rather had a stronger effect on the inclination of the wall.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.6
• /
• pp.1021-1029
• /
• 1992

A rational and straightforward method is introduced for developing continuum models of large platelike periodic lattice structures based on energy equivalence. The procedure for developing continuum plate models involves the use of existing well-defined finite element matrices for the easy calculation of strain and kinetic energies of a repeating cell, from which the reduced stiffness and mass matrices are obtained in terms of continuum degrees- of-freedom defined in this paper. The equivalent continuum plate properties are obtained from the direct comparison of the reduced matrices for continuum plate with those for lattice plate. The advantages of the present continuum method are that it may be applied to arbitrary lattice configurations and may give most diverse equivalent continuum plate properties including all kinds of coupling, while other methods may give only limited structural properties. To evaluate the continuum method developed in this paper, free vibration analyses for both of continuum and lattice plates are conducted. Numerical results show that the present continuum method gives very reliable structural and dynamic properties compared to other well-recognized methods.

• Journal of KSNVE
• /
• v.8 no.2
• /
• pp.361-368
• /
• 1998

Complex and large lattice type structures are frequently used in design of bridge, tower, crane and aerospace structures. In general, in order to analyze these structures we have used the finite element method(FEM). This method is the most widely used and powerful tool for structural analysis. However, it is necessary to use a large amount of computer memory and computation time because the FEM resuires many degrees of freedom for solving dynamic problems exactly for these complex and large structures. For overcoming this problem, the authors developed the transfer stiffness coefficient method(TSCM). This method is based on the concept of the transfer of the nodal dynamic stiffness coefficient which is related to force and displacement vector at each node. In this paper, the authors formulate vibration analysis algorithm for a complex and large lattice type structure using the transfer of the nodal dynamic stiffness coefficient. And we confirmed the validity of TSCM through numerical computational and experimental results for a lattice type structure.

• Journal of Korean Association for Spatial Structures
• /
• v.4 no.2 s.12
• /
• pp.99-105
• /
• 2004

The structure systems with non-rigid member were classified by the composition type of line and surface members. As a result of the classification, there are 1-way cable structure, cable net and radial cable net structure in the line member system. And there are pneumatic structure and suspension membrane structure in surface member system. In addition, when the line and surface members are composed together, there is the hybrid membrane system which are divided into hanging type and supported type. In this paper, the Korean terms of structure systems with non-rigid member are recommended through this classification.

• Journal of KSNVE
• /
• v.8 no.5
• /
• pp.949-956
• /
• 1998

Complex and large lattice type structures are frequently used in design of bridge, tower, crane and aerospace structures. In general, in order to analyze these structures we have used the finite element method(FEM). This method is the most widely used and powerful method for structural analysis lately. However, it is necessary to use a large amount of computer memory and computational time because the FEM requires many degrees of freedom for solving dynamic problems exactly for these complex and large structures. For analyzing these structures on a personal computer, the authors developed the transfer stiffness coefficient method(TSCM). This method is based on the concept of the transfer of the nodal dynamic stiffness coefficient matrix which is related to force and displacement vector at each node. And we suggested TSCM for free vibration analysis of complex and large lattice type structures in the previous report. In this paper, we formulate forced vibration analysis algorithm for complex and large lattice type structures using extened TSCM. And we confirmed the validity of TSCM through computational results by the FEM and TSCM, and experimental results for lattice type structures with harmonic excitation.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.11 no.2
• /
• pp.234-242
• /
• 1987

The solution of shape design problems based on variational analysis has been approached by using the domain adaptive method. The objective of the structural shape design is to minimize the weight within a bound on local stress measure, or to minimize the maximum local stress measure within a bound on the weight. A derived optimality condition in both design problems requires that the unit mutual energy has constant value along the design boundary. However, the condition for constant stress on the design boundary was used in computation since the computed mutual energy oscillates severely on the boundary. A two step iteration scheme using domain adaptation was presented as a computational method to slove the example designs of elastic structures. It was also shown that remeshing by grid adaptation was effective to reduce oscillatory behavior on the design boundary.

• Korean Journal of Materials Research
• /
• v.6 no.3
• /
• pp.253-263
• /
• 1996

고온.고압하에서 장시간 사용되는 고온부재용 구조물은 경년열화현상을 나타낸다 그러므로 구조물의 안정성 측면에서 재질열화의 정도를 정량적으로 평가하는 것이 중요하다. 그러나 실기 구조물에서 채취할 시험편의 크기와 수는 제한이 되기 때문에 새로운 비파괴적인 평가법이 요구되고 있다. 따라서 본 연구에서는 화력발전설비에 이용되는 탄소강과 페라이트강에 대한 열화도의 평가를 위해 입계부식법의 적용 가능성을 조사한다. 시험결과, 재질열화의 정도는 사용시간보다 사용온도에 더 큰 영향을 받았으며, Larson-Miller인자와 열화도([$\Delta$DBTT]SP)사이의 관계는 선형적이었으나, 강종에 따라 다른 기울기를 보였다. 반면, 연성-취성천이온도 ([$\Delta$DBTT]SP)와 격자절단비(Ni/No)와 관계는 강종에 무관하게 선형적인 비례관계를 나타내었다. 또한, [$\Delta$DBTT]SP와 Ni/No 의 관계로부터 입계부식법은 페라이트계 강뿐만아니라 탄소강에 대해서도 유용한 재질열화 평가 방법임을 알 수 있었다.

• Composites Research
• /
• v.15 no.4
• /
• pp.32-36
• /
• 2002

Recently, the applications of composite materials become broader to civil engineering as well as mechanics and aerospace engineering. Cracks on the civil structures like bridges can cause stress concentration, which induces Peak splitting of fiber Bragg grating sensor and it makes strain measurements difficult. In this study, 4-point bending test of concrete beam with initial crack reinforced by composite patch was conducted in order to verify the effects of the stress concentration on the peak signal of FBG sensor and a novel method for signal maintenance.