• Journal of the Korean Society of Radiology
• /
• v.14 no.5
• /
• pp.635-642
• /
• 2020

The purpose of this study was to analysis the effects of shielding area of field configuration with changing of sensitivity and density on tube current (milliampere-seconds, mAs) and image quality in automatic exposure control (AEC) system. The equipment used a digital radiography device (Digital Diagnost, Philips, Netherlands), which has a integral type with an X-ray tube and an indirect digital detector. The AEC system conditions were consisted of 9 setting environments, that mode changing of the sensitivity (S200, S400, S800) and the density (+2.5, 0, -2.5). The tube current evaluated automatically exposed mAs under 81 combination conditions crossed by AEC conditions in fixed at 40 kVp. The image quality evaluated the radiographic images that selected valid images by visual assessment the radiographic images of the self-produced conical pyramid phantom and then measured their signal to noise ratio (SNR). As a result, the maximum tube current was 60.0 mAs that automatically exposed conditions were the 100% of shielding area and the sensitivity of S200 and the density of +2.5. The minimum tube current was 0.9 mAs with non-shielding area and the sensitivity of S800 and the density of -2.5. When the shielded area 0% with the sensitivity of S200 and the density of +2.5, the maximum SNR was the highest as 25.2. But when the shielded area 25% with the sensitivity of S800 and the density of -2.5, the minimum SNR was the lowest as 4.7.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.311-312
• /
• 2012

본 발표에서는 광학적 분석 시스템에 적용 가능한 발광소자(광원)과 수광소자(광센서)를 집적화시키는 모듈(수 발광 집적모듈) 기술을 제시하고자 한다. 이러한 수-발광 집적모듈은 다양한 응용 분야에 적용 될 수 있다. 예를 들어, 광신호 감지를 위한 광통신용 송-수신 모듈(optical communication), 의료/진단 분야에서 단백질/DNA/박테리아 등의 검출 및 분석에 관한 바이오 센서(bio-sensor), 그리고 대기(가스)/수질 모니터링에 관한 환경센서 등 매우 광범위한 분야에 해당되는 요소 기술이라 할 수 있다. 특히, 이들 분야들 중 바이오 물질을 분석하고 검출하는 광학적 바이오 센서 기술은 높은 경제적 가치와 산업적 성장 잠재력으로 인해 오랫동안 활발한 연구가 진행되어 오고 있다. 이러한 광학적 바이오 센서에서 가장 범용적인 방법 중 하나가 항온-항체 면역반응을 기반으로 하는 형광 검출(fluorescence detection) 기법이다. 이러한 시스템은 전체적으로 광원, 광학계, 그리고 센서로 구성되는데 기존에 일반적으로 사용되고 있는 형광 현미경의 경우는 민감도가 우수하다는 장점은 있으나 상당히 고가이고 부피가 크며 복잡한 광학구성으로 이루어져 있다는 한계점을 가지고 있다. 이러한 맥락에서 고민감도를 확보하면서 휴대성, 고속처리, 저가 등의 특성을 가진 시스템에 대한 요구가 갈수록 증가하고 있다. 이를 해결하기 위한 핵심기술 중의 하나가 수-발광 부분을 집적화 시키는 기술이라 할 수 있다. 본 연구에서는 바이오 센서 기술의 하나로서 형광을 측정하여 혈액내의 진단 지표인자를 검출할 수 있는 휴대용 혈액진단기기에 적용되는 소형 수 발광 집적 모듈을 개발하였다. 혈액내의 검출 성분의 양에 따라 형광의 세기가 변화하게 됨으로써 정량적인 검출이 가능한 원리이다. 모듈의 구조는 크게 광원(발광소자), 광학계, 그리고 광센서(수광소자) 세 영역으로 나누어 진다. 광원은 635 nm 적색 레이저다이오드로서 형광체(Alexa Fluor 647/발광파장: 668 nm)를 여기 시키는 기능을 하며 장착된 볼렌즈 의해 샘플의 형광체 영역으로 집광된다. 광학계는 크게 시준렌즈(collimating lens)와 광학필터로 구성됨으로써 샘플로부터 발생되는 광을 적절하게 수광소자로 전달하는 기능을 하게 된다. 여기서 광학필터의 경우는 기본적으로 Distributed Bragg's Reflector(DBR) 구조로써 실리콘(Si) 포토다이오드 상부에 모노리식(monolithic)하게 형성되며 검출 샘플로부터 진행되는 레이저 광(잡음의 주원인)은 차단하고 형광(광신호)만 통과 시키는 기능을 하게 된다. 따라서 신호 대 잡음비(S/N ratio)를 향상시키기 위해서는 정밀한 광 필터링 기능이 요구됨으로써 박막의 세밀한 공정 조건과 구조적-광학적 특성 분석이 수행되었다. 마지막으로 포토다이오드 소자는 일반적인 구조 이외에 중앙에 원형 구멍이 형성된 특별한 구조가 적용된다. 이것은 포토다이오드 구조에 변화를 줌으로써 모듈 구조를 효율적으로 응용할 수 있다는 의미를 갖는다. 또한 포토다이오드의 전기적-광학적 측정 분석을 통해 잡음 및 감도 특성이 세부적으로 조사되며 형광신호를 효과적으로 측정할 수 있음을 확인하였다. 최종적으로 제작된 모듈은 약 $1{\times}1{\times}1cm^3$ 내외 정도의 크기를 갖는다. 요약하자면 본 발표에서는 광학적 바이오센서에 적용할 수 있는 소형 수-발광 소자 집적모듈을 소개한다. 전체 모듈 설계는 최소한의 부피를 가짐과 동시에 측정의 정밀성을 향상시키는데 초점을 맞추어 진행하였다. 세부요소인 광학필터와 포트다이오드의 경우 잡음 및 민감도에 미치는 중요성 때문에 세밀한 공정 및 특성분석이 수행되었다. 결론적으로 독자적인 설계 및 공정을 통해 휴대성 및 정밀성 등의 목적에 부합한 경쟁력 있는 수-발광 소자 집적모듈 제작 기술을 확보하였다.

• Journal of the Korean Chemical Society
• /
• v.54 no.2
• /
• pp.215-221
• /
• 2010

Salmonella is an important food-and water-borne pathogen associated with acute gastrointestinal illnesses around the world. The most common serotypes isolated from humans are Salmonella enterica serotype Typhimurium (S. Typhimurium) and S. Enteritidis. Traditional detection methods for Salmonella are based on cultures using selective media and characterization of suspicious colonies by biochemical and serological tests. These methods are generally time-consuming and not so highly sensitive. Recently, the Loop Mediated Isothermal Amplification and real-time PCR has been used as a highly sensitive, specific, and rapid test for the presence of pathogenic bacteria. In this study, a LAMP and real-time PCR was used to detect S. Typhimurium and S. Enteritidis. We selected target genes, which were the in invA and a randomly cloned sequence specific for the genus Salmonella. With LAMP and real-time PCR, random sequence was detected from Salmonella spp, invA were detected from all strain of S. Typhimurium and S. Enteritidis. This assay indicate that the specificity, sensitivity and rapid of the LAMP and real-time PCR make them potentially valuable tools for detection of S. Typhimurium and S. Enteritidis.

• Journal of the Korean Society of Radiology
• /
• v.18 no.2
• /
• pp.65-71
• /
• 2024

To achieve high resolution and sensitivity of positron emission tomography (PET) for small animals, the detector is constructed using very thin and long scintillation pixels. Due to the structure of these scintillation pixels, spatial resolution deterioration occurs outside the system's field of view. To solve this problem, we designed a detector that could improve spatial resolution by measuring the interaction depth and improve sensitivity by using a quasi-block scintillator. A quasi-block scintillator size of 12.6 mm x 12.6 mm x 3 mm was arranged in four layers, and optical sensors were placed on all sides to collect light generated by the interaction between gamma rays and the scintillator. DETECT2000 simulation was performed to evaluate the performance of the designed detector. Flood images were acquired by generating gamma-ray events at 1 mm intervals from 1.3 mm to 11.3 mm within the scintillator of each layer. The spatial resolution and peak-to-peak distance for each location were measured in an 11 x 11 array of flood images. The average measured spatial resolution was 0.25 mm, and the average distance between peaks was 1.0 mm. Through this, it was confirmed that all locations were separated from each other. In addition, because the light signals of all layers were measured separately from each other, the layer of the scintillator that interacted with the gamma rays could be completely separated. When the designed detector is used as a detector in a PET system for small animals, it is considered that excellent spatial resolution and sensitivity can be achieved and image quality can be improved.

• Proceedings of the Korean Information Science Society Conference
• /
• 2008.06c
• /
• pp.450-455
• /
• 2008

다시점 비디오는 여러 개의 시점(view-point)을 이용하여 현장감과 몰입감을 제공하는 새로운 형태의 멀티미디어 서비스이다. 시점의 개수가 증가함에 따라 방대한 양의 영상 데이터로 인한 영상 획득, 저장 전송 및 재현 시 문제가 발생한다. 또한 현재의 다시점 비디오에 관한 연구는 고정된 카메라로 환경이 제한되어 있다. 본 논문에서는 유동적인 카메라 환경에서 최적의 상관관계를 가지는 영상을 획득하기 위한 방법을 제안한다. 제안하는 방법은 영상의 일부분만을 선택하여 중복성을 먼저 측정하고, 중복성의 척도에 따라 사용자와의 상호작용을 통하여 높은 상관관계를 가지는 다시점 영상을 획득할 수 있다. 또한 영상 획득 시 카메라간의 조명 차이에 의해 발생되는 부정확성을 감소시키기 위해 영상 마스킹을 적용한다. 마스킹된 영상에 에지 검출 방법을 적용하여 변위 추정을 함으로써 계산 복잡도를 줄였다.

• Electrical & Electronic Materials
• /
• v.10 no.4
• /
• pp.349-354
• /
• 1997

This paper aims at studying the improvement of test method for t-weight sensitive fault (t-wsf) detect. The development of RAM fabrication technology results in not only the increase at device density on chips but also the decrease in line widths in VLSI. But, the chip size that was large and complex is shortened and simplified while the cost of chips remains at the present level, in many cases, even lowering. First of all, The testing patterns for RAM fault detect, which is apt to be complicated , need to be simplified. This new testing method made use of Local Lower Bound (L.L.B) which has the memory with the beginning pattern of 0(l) and the finishing pattern of 0(1). The proposed testing patterns can detect all of RAM faults which contain stuck-at faults, coupling faults. The number of operation is 6N at 1-weight sensitive fault, 9,5N at 2-weight sensitive fault, 7N at 3-weight sensitive fault, and 3N at 4-weight sensitive fault. This test techniques can reduce the number of test pattern in memory cells, saving much more time in test, This testing patterns can detect all static weight sensitive faults and pattern sensitive faults in RAM.

• Journal of the Korean Chemical Society
• /
• v.34 no.3
• /
• pp.255-259
• /
• 1990

The nitrogen-laser flash photolysis apparatus has been set up to detect directly the transient produced from the excited Benoxaprofen (BXP). The function of the instrument has been tested by using anthracene as a standard sample. The laser photoexcitation of BXP in ethanol has been carried out under a constant stream of $N_2$ gas and a transient absorption spectrurn has been recorded over the 400-600 nm. The effects of oxygen and ${\beta}-carotene$ on the transient spectrum reveal that thee maximum transient absorption at 415 nm is attributed to the triplet state of BXP and the triplet energy of BXP is above 22 Kcal/mole. In addition to the triplet state, another transient species has been observed to be produced, which is probably a radical form of BXP. The photosensitization mechanism of BXP is discussed based on these results.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.43 no.9
• /
• pp.1423-1430
• /
• 2014

This study investigated the effects of superheated steam (SHS) and high hydrostatic pressure (HHP) on the quality of Galbijjim. SHS cooking increased moisture and crude fat contents and decreased crude protein contents (P<0.05). The value of L was significantly higher upon SHS cooking compared to conventional cooking (CC), whereas a and b values were not significantly different among the samples. Hardness decreased more upon CC than SHS. The results of the safety storage experiment at refrigeration temperature showed that the total number of bacteria was lower in SHS-HHP than in CC-HHP. The thiobarbituric acid value increased to 0.70~1.56 mg malonaldehyde (MA)/kg in CC-HHP after 15 days, and SHS-HHP showed 0.69 (0 day)~1.24 (15 days, $10^{\circ}C$) mg MA/kg. Volatile basic nitrogen value was 18.07~36.76 mg% in CC-HHP, and that in SHS-HHP also increased to 17.06 (0 day)~35.76 mg% (15 days, $10^{\circ}C$). Overall, SHS cooking and HHP reduced microorganisms, which could improve product quality and sanitation.

• Journal of Life Science
• /
• v.27 no.3
• /
• pp.275-282
• /
• 2017

Adenovirus (ADV) and human bocavirus (hBoV) cause acute respiratory tract infections, and are often associated with increased rates of hospitalization and death, particularly in infants and young children. The aim of this study was to analyze the clinical features and molecular phylogeny of ADV and hBoV isolated in Busan, from January 2011 to November 2013. In total, 3,230 specimens (throat swabs) were collected from patients with influenza-like illnesses and acute respiratory tract infections. Multiplex real-time RT-PCR was performed to detect eight respiratory viru [rhinovirus, adenovirus, respiratory syncytial virus, human coronavirus, human metapneumovirus, human bocavirus, parainfluenza virus and influenza virus] and detected 1,485(46.0%) cases. Among 1,485 positive specimens, 257(8.0%) cases were ADV and 68(2.1%) cases of hBoV. A significant clinical feature of ADV is fever and headache whereas hBoV is wheezing. Serotypic distributions of isolated ADV and hBoV were analyzed by sequencing of hexon and VP1/VP2 gene, respectively. ADV was identified seven different serotypes(1~6, 8), revealing a high similarity among the isolates (>97%). The predominant types of ADV were type 1 in 2011, type 3 and 4 in 2012, type 3 in 2013, respectively. ADV type 3 was major causative type during outbreaks in 2013. All of the hBoV was identified as hBoV type 1.

• The Journal of the Korea Contents Association
• /
• v.19 no.12
• /
• pp.517-526
• /
• 2019

The purpose of this study is to find the optimal method for clinical application by analyzing image quality and radiation output according to parameter combination when using the Automatic Exposure Control (AEC). The experimental method combines 70, 81 kVp with sensitivity S200, S400, S800 and S1000 of the Automatic Exposure Control for Entrance Surface Dose (ESD), current volume, Signal to Noise Ratio (SNR), Contrast to Noise Ratio (CNR), Time-to-Radiation Dose Curve in abdomen and pelvis. And then, image quality and radiation output stability were evaluated. As a results, Entrance Surface Dose, current volume, Signal to Noise Ratio, Contrast to Noise Ratio decreased as the tube voltage and sensitivity were set higher. In addition, the higher tube voltage and sensitivity, the Time-to-Radiation Dose Curve showed a poor output stability. In conclusion, the higher the combination of tube voltage and sensitivity in the use of Automatic Exposure Control, the more problems can be seen in image quality and stability of the radiation output. Therefore, a relatively low combination of tube voltage and sensitivity showed that the image quality and radiation output stability could be optimized by minimizing the error range that would occur when the detector recognized a combination of parameters.