• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.11 no.4
• /
• pp.319-324
• /
• 2018

In this paper, we designed and implemented a code conversion method between ISO/IEC 10646 and the multi-byte code set. The Universal Multiple-Octet Coded Character Set(UCS) provides codes for more than 65,000 characters, huge increase over ASCII's code capacity of 128 characters. It is applicable to the representation, transmission, interchange, processing, storage, input and presentation of the written form of the language throughout the world. Therefore, it is so important to guide on code conversion methods to their customers during customer systems are migrated to the environment which the UCS code system is used and/or the current code systems, i.e., ASCII PC code and EBCDIC host code, are used with the UCS together. Code conversion utility including the mapping table between the UCS and IBM new host code is shown for the purpose of the explanation of code conversion algorithm and its implementation in the system. The programs are successfully executed in the real system environments and so can be delivered to the customer during its migration stage from the UCS to the current IBM code system and vice versa.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.19 no.3
• /
• pp.75-84
• /
• 2005

Since an unexpected fault of induction motor drive systems can cause serious troubles in many industrial applications, which the technique is required to diagnose faults of a voltage-fed PWM inverter for induction motor drives. The considered fault types are rectifier diodes, switching devices and input terminals with open-circuit faults, and the signal for diagnosis is derived from motor currents. The magnitude of dq-current trajectory is used for the feature extraction of a fault and PCA LDA are applied to diagnose. Also, we show results with respect to the execution time because of the possibility to use that a diagnosis software is embedded in the controllers of medium and small size induction motors drive for real-time diagnosis. After we performed various simulations for the fault diagnosis of the inverter, the usefulness of proposed algerian was verified.

• Journal of Korea Game Society
• /
• v.16 no.6
• /
• pp.131-142
• /
• 2016

Recently, a variety of methodologies based on the use of educational coding robots have been proposed and experimented in newly emerging korean educational coding markets. Due to imprecise movement accuracy of the existing coding robots, however, such robots are mainly used as a toy. Inspired by these observations, we developed a simple adjustment method during robot movements, which is based on the observation results of 6 line-tracking sensors: 3 sensors in the center of a robot and other 3 sensors at the front. These sensors help to determine whether the robot is in the right location and whether it rotates as expected. Through the well-designed experiments, we report the effectiveness of our proposed solution: the average distance error of 1.57cm and the average degree error of 2.38 degree before and after complex movements. In near future, we hope our method to be popularly used in various educational coding robot platforms.

• Journal of Advanced Navigation Technology
• /
• v.21 no.5
• /
• pp.491-500
• /
• 2017

This paper investigates a low cost dual modular redundancy system based on heartbeat which can be applied to traffic control signal system. Failure of the traffic control signal system can cause traffic confusion and traffic accidents. Therefore safety and reliability of traffic control should be secured using fault tolerance technology. To do this, we configured a redundant board using the open source hardware and the heartbeat technique of Linux HA. The function of the traffic signal control system was verified and the fault recovery time was measured using fault injection test. As a result of the test, the fault recovery time was confirmed to be less than 9 seconds on average, confirming that the reliability target time is satisfied. Based on the results of this study, it is expected that it can be applied to fields requiring high reliability systems such as aviation, space, and nuclear power embedded systems.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.8
• /
• pp.1965-1972
• /
• 2015

The Missile Flight Test Launch Control System is to operate in conjunction with the Fire Control System during flight test to guided weapons. Also, this is a system for the test control and situation monitoring depending on the type of guided weapons and testing purposes. Message structure, communication protocols, such as data types for interworking with the fire control system and the Missile Flight Test Launch Control System are defined in the Launch Control ICD(Interface Control Document). ICD are composed differently of each guided weapons system and each test object. Previously, in order to interwork with the Fire Control System, the interlocking software was developed, which had a variety of problems. Therefore, we developed a new parsing algorithm in order to recognize the variety of Launch Control ICD and verified that the algorithm operates normally by checking transmitting and receiving various message in conjunction with the fire control system.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.10a
• /
• pp.281-284
• /
• 2008

This paper describes ASIC design of multimedia SoC Platform. The implemented Platform consists of 32-bit OpenRISC1200 Microprocessor, WISHBONE on-chip bus, VGA Controller, Debug Interface, SRAM Interface and UART. The 32-bit OpenRISC1200 processor has 5 stage pipeline and Harvard architecture with separated instruction/data bus. The VGA Controller can display RCB data on a CRT or LCD monitor. The Debug Interface supports a debugging function for the Platform. The SRAM Interface supports 18-bit address bus and 32-bit data bus. The UART provides RS232 protocol, which supports serial communication function. The Platform is design and verified on a Xilinx VERTEX-4 XC4VLX80 FPGA board. Test code is generated by a cross compiler' and JTAG utility software and gdb are used to download the test code to the FPGA board through parallel cable. Finally, the Platform is implemented into a single ASIC chip using Chatered 0.18um process and it can operate at 100MHz clock frequency.

• Journal of Advanced Marine Engineering and Technology
• /
• v.41 no.3
• /
• pp.258-268
• /
• 2017

In this study, we aim to converge a technology for analyzing the hydraulic circuit of a loading arm with an- other one for analyzing multi-body dynamics by utilizing analysis software SimulationX. Further, this study intends to overcome the limitations of the existing technology for analyzing a hydraulic circuit with a variation at the rotation center of the moving mass and the difficulty of incorporating the behavior in a gravity field. First, the specifications of the hydraulic circuit components were reflected in an analysis model to secure reliability. Hydraulic circuit modeling was then performed using a single analysis model with a verified reliability. Subsequently, the multi-body system (MBS) model of the loading arm was formed. Finally, the analysis model of the hydraulic circuit and the MBS model were converged to check if the circuit analysis result was exactly reflected in the MBS model. The convergence analysis model has development cost-saving effect because it is capable of predicting the dynamic behavior of an object without the prototype.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.35 no.12
• /
• pp.1293-1300
• /
• 2011

The configurations of the evaporator and condenser of a water chiller can be determined from the trade-off between the heat transfer area, which is related to the capital cost and the pressure drop, which is associated with the operational cost. In this study, the design of the water chiller focused on minimizing the water pressure drop of both condenser and evaporator for given cooling capacity and requirements. Commercial enhanced tubes were employed to simulate real-life conditions. The results of the present analysis were compared with those obtained by HTRI software for verifying them. The results indicated that a reduction in the water pressure drop, which is associated with the short length of a tube, can be effected by decreasing the number of tube passes and increasing the number of tubes and the tube diameter. However, using a large number of tubes with smaller diameters can reduce the capital cost because the tubes are short. The reduction of the capital cost is due to the fact that a small-diameter tube has low internal thermal resistance and hence contributes to a decrease in the overall thermal resistance per unit length.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2012.10a
• /
• pp.427-430
• /
• 2012

최근 차량용 블랙박스, 자동 운전 시스템, 어라운드 뷰 시스템 등과 같은 운전자의 편의와 안전을 위한 장치 및 시스템들이 개발되고 있다. 현재 운전자를 위한 보조 시스템으로 구글(google)의 자동 운전 시스템(Auto Car Driving System)과 현대 모비스(hyundai mobis)의 AVM 시스템(Around View Monitoring System) 등의 다양한 차량용 편의장치 시스템들이 등장했다. 위와 같은 다양한 ECU들을 관리하기 위한 서버 및 저장 장치 역할을 할 수 있는 고사양의 Car PC의 장착이 필수적이다. 기존의 AVM 시스템은 차량 주변을 실시간으로 제공하기 위해 임베디드 또는 별도의 차량용 네트워크를 통해 임베디드 시스템 또는 SoC(System On Chip)형태의 하드웨어 기반으로 개발되고 있다. 하지만 고사양의 Car PC 기반에서는 별도의 비용없이 소프트웨어로 구현이 가능하다. 본 논문에서는 차량의 전 후 좌 우에 장착된 4대의 카메라로부터 입력된 차량 주변 상황을 한눈에 보여주는 AVM 시스템(Around-View Monitoring System)을 위한 카메라 보정 및 정합 처리 모듈 및 AVM 시스템을 Windows를 O/S로 하는 PC 내부에서 기존의 AVM 시스템을 이용하여 화면에 전 후 좌 우 버튼을 각각 만들어 버튼을 터치했을 때, 각 버튼에 해당되는 영상이 AVM 시스템과 함께 출력되도록 하거나 디스플레이에 Full 버전으로 출력되도록 S-UI(Smart User Interface)를 설계 및 구현한다. 제안하는 AVM 시스템과 기존의 AVM 시스템의 성능과 기능을 비교 분석함으로써 제안하는 영상 처리 모듈을 이용하여 추가 비용이 발생하지 않는 AVM 시스템의 구현 가능성을 검증한다.

• The KIPS Transactions:PartC
• /
• v.11C no.7 s.96
• /
• pp.937-950
• /
• 2004

In this paper, we present the design and implementation of new execution environment named Customizable Architecture for Flexible Execution Environment(CAFEs) that supports the mechanism of protocol customization and service referencing. We introduce a new concept as micro protocols and active services to enhance software reusability. Micro protocol represents a specific algorithm or functionality of existing network protocol and the active service is in charge of binding legacy application and releasing the active network oriented services. The pro-posed active network execution environment is made up of three parts, virtual network system, protocol and service manager, event engine. First, the virtual network system is used to connect each active nodes using virtual network channels which are based on multiple existing protocol layers. Second, the protocol and service manager is responsible for composing micro protocols and active services to develop new network proto-col and service easily. Finally, the event engine is used to detect the automatic transition of system components using event delegation model. To verify the CAFTs, we have an experiment about the delivery of web contents which are suitable for the user's terminals in the wireless Internet environment. As a result. we are able to obtain the availability of developed execution environment.