• Journal of the Korean Applied Science and Technology
• /
• v.29 no.1
• /
• pp.129-140
• /
• 2012

Smoke toxicity is the test for the toxicity evaluation of smoke and hazardous gas, caused by combustion of building materials and finishing materials. Smoke toxicity can be evaluated by the mean incapacitation time of mice. This test result can be influenced by the health status of mice and test condition. In acute inhalation toxicity test of hazardous gas, no typical clinical findings and histopathologic abnormalities were observed. Tracheitis and bronchitis as well as acute lung inflammation around terminal bronchiole in some mouse of the highest dose group. Through this study, we established the method for inhalation toxicity test of hazardous gas as well as the SOP of inhalation toxicity test. However, in the future studies, the concentration control methods for inhalation technologies on hazardous gas will be needed to improve continuously and also further studies on other gas inhalation toxicity will be needed to conduct.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.24 no.5
• /
• pp.525-531
• /
• 2004

In this paper, the concept of infrared thermography(IRT), the principle of measurement of IRT and how to set up the IR camera for the nondestructive testing are described in detail. Also, its utilization and non-destructive testing(NDT) diagnosis are reviewed. By performing the periodic non-touched WDT through the estimation of thermal patterns related with the temperature for the surface targeted, IRT can be applied to the early prevention of the device failure. For the diagnosis utilization, thermal imaging patterns obtained from IRT for heated blocks with internal defects were estimated through the lion-destructive method and discussed the way of IRT estimation from the analysis of characteristics between material defects and thermal imaging patterns.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.27 no.4
• /
• pp.321-327
• /
• 2007

In lock-in thermography, a phase difference between the defect area and the healthy area indicates the qualitative location and size of the defect. To accurately estimate these parameters, the shearing-phase technique has been employed which gives the shearing-phase distribution. The shearing-phase distribution has maximum, minimum, and zero points that help determine quantitatively the size and location of the subsurface defect. In experiment, the proposed technique is verified with artificial specimen and these related factors are analyzed.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.28 no.1
• /
• pp.25-32
• /
• 2008

[ $^{169}Yb$ ] industrial NDT sealed sources were developed by using $Yb_2O_3$ pellets as the target and demonstrated for their performance. To produce the pellets, optimal compacting and sintering conditions were determined experimentally. Source holders for $^{169}Yb$ were designed and fabricated. After assembling an active source produced from HANARO with the developed source holder, a demonstration experiment was performed to compare the quality of the radiographs from $^{192}Ir$ and soft X-rays. This demonstration study showed that the developed $^{169}Yb$ produced better radiographs than $^{192}Ir$ for a carbon steel with less than a 4 mm thickness.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.14 no.2
• /
• pp.161-167
• /
• 2021

Laboratory Information Management System(LIMS) is a centralized database for storing, processing, retrieving, and analyzing laboratory data, and refers to a computer system or system specially designed for laboratories performing inspection, analysis, and testing tasks. In particular, LIMS is equipped with a function to support the operation of the laboratory, and it requires workflow management or data tracking support. In this paper, we collect data on websites and various channels using crawling technology, one of the automated big data collection technologies for the operation of the laboratory. Among the collected test methods and contents, useful test methods and contents useful that the tester can utilize are recommended. In addition, we implement a complementary LIMS platform capable of verifying the collection channel by managing the feedback.

• Proceedings of the KWS Conference
• /
• 2009.11a
• /
• pp.84-84
• /
• 2009

파이프라인을 건설함에 있어 가장 중요한 기술이 배관 용접기술이다. 즉 파이프와 파이프를 연결하는 작업이 공사 진척도를 결정하기 때문에, 이를 얼마나 경제적으로 신속하게 수행해 나가느냐하는 것은 건설기간 및 건설비용을 결정하는 핵심 요소이다. 가스배관 시공 원주용접 방법은 여러 가지 있는데, 현재 국내에서는 전량 수동용접을 채택하고 있다. 이 방법은 국내 가스배관을 건설한 초기부터 적용해온 것으로 우수한 품질을 확보할 수 있으며, 취약한 국내 자동화기술과 열악한 도로 매설 시공여건에서 적용하기 용이한 방안이다. 그러나 우수한 용접기량을 보유한 용접사가 점차 부족해지고, 배관시공 시간을 단축하고 비용을 줄이기 위한 필요성이 점차 커지면서 이를 해결할 수 있는 기술로서 자동원주용접방안이 있다. 이 기술들은 해외 가스배관에 이미 오래전부터 적용되어 용접부위 신뢰성과 품질 우수성을 확보하고 시공비용절감을 달성하고 있다. 자동용접을 적용하기 위해서는 용접절차를 수립하여 절차인증시험을 수행하고, 기존방안과 동일이상의 품질이 확보되며 효율성을 겸비해야만 한다. 국가 기본에너지의 안정적인 공급을 위해 적기 시공이 필요하고, 1 km당 10 억원 이상이 소요되는 배관시공비용 중 약 1/3이 용접비파괴검사 비용인 점을 감안할 때 품질이 확보되면서 경제적인 시공방안이 있다면 이를 적용하는 것이 국가 산업 경제적 측면에서 필요한 일이다. 이와 관련된 연구에서는 국내 가스배관 원주용접에 적용 가능한 용접공정을 검토하고, 용접절차를 수립하여 절차인증시험을 수행하였으며, 추가로 배관 원주 자동용접부위에 대한 기계적 특성 평가를 실시하였다. 현재 국내 건설여건과 비파괴검사 기준을 만족시키고 안전성과 효율성을 겸비한 방법으로는 초층과 2층은 수동 GTAW를 적용하고 나머지 층은 반자동 FCAW를 적용하는 방안이 적절한 것으로 판단된다. 전 층을 자동 GTAW로 용접하는 방안은 품질은 확보되지만 효율성측면에서 대형배관에는 적용하기 어려울 것으로 보이며, 해외에서 많이 사용되는 자동 GMAW 방안은 국내 비파괴검사기준을 만족시키기 어려워 검토대상에서 제외하였다. 본 논문에서는 두 가지 용접방법에 대한 용접공정개발과정과 원주용접부위 기계적 특성을 검토하여 최적방안을 제시하고자 한다.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.1 no.1
• /
• pp.14-19
• /
• 1990

A site attenuation measurement system has been developed and evaluated. The system uses selfresonant dipole antennas and baluns. Using the system we measured the site attenuations of the KSRI open area test site. The measured results agree with calculated data within $\pm$3dB , so the site can be used for EMI/EMC measurements and antenna calibrations.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2019.05a
• /
• pp.211-213
• /
• 2019

This paper proposes an image detection method, which can detect images regardless of the location and the direction of an image, required for automatic inspection based on machine vision technologies. A cable harness is considered in this paper as an inspection object, and implementation results of a technology of being applicable to a real cable harness production process is presented.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.31 no.4
• /
• pp.398-413
• /
• 2011

For railway safety, it is very important to detect damages of rails at their early stage because any undetected damage in a rail can break the rail and cause a serious railway accident. In this paper, several NDT applicable to rail inspections are described. Major damage types in rails are discussed first and the rail inspection technology using conventional piezoelectric ultrasonic transducers, which is widely adopted for damage detection of rails, is explained. Other NDT being researched or tested for rail inspection are also discussed as complementary technologies to the concurrent contact type ultrasonic inspection. Characteristics of each rail inspection technologies are evaluated in order to provide requirements for future development of a new rail inspection method.

• Journal of Korea Multimedia Society
• /
• v.8 no.8
• /
• pp.1119-1133
• /
• 2005

As a very important part in development of the protocol, verification and conformance test for protocol specification are complementary techniques that are used to increase the level of confidence in the system functions as prescribed by their specifications. In this paper, we verify the safety and liveness properties of rail signal control protocol type 1 specified in LTS with model checking method, and experimentally prove that it is possible to check for the deadlock, livelock and rechability of the states and actions on LTS. The implemented formal checker is able to verify whether properties expressed in modal logic are true in specifications using modal mu-calculus. We also propose a formal method on generation of conformance test cases using the concept of UIO sequences from verified protocol specification. The suggested tools are implemented by C++ language under Windows NT.