• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.05a
• /
• pp.160-160
• /
• 2004

초음파 여기를 이용한 물체 이송 시스템은 최근 급속히 발달하고 있는 광산업이나 반도체 산업에서 기존의 이송 시스템의 단점을 보완하기 위해 개발되었다. 기존의 이송 시스템들은 이송공정이나 검사 공정 등에서 광소자의 표면손상이나 자기장에 의한 반도체 소자의 전자적 배열의 손상이 우려되었다. 하지만 PZT 액츄에이터로 구동되는 초음파 발생장치(Ultrasonic wave generator)에서 발생한 초음파 여기를 이용하여 물체를 이송시킬 경우 이러한 단점은 보완된다.(중략)

• Proceedings of the KSME Conference
• /
• 2000.04b
• /
• pp.138-143
• /
• 2000

A new method of measuring the thermal diffusivity of solid material at room temperature with photothermal displacement method is proposed. The influence of the parameters on phase lag was studied. From the minimum position of phase of measured deflection with respect to the pump beam the thermal diffusivity of the materials can be obtained. The minimum position of phase is determined using multiparameter least-square regression fitting. The experimental values for different samples obtained by applying new method are in good agreement with the literature values.

• Proceedings of the KWS Conference
• /
• 2006.10a
• /
• pp.161-163
• /
• 2006

포항가속기는 선형가속기 및 저장링을 통하여 2.5Gev의 고에너지 전자빔 생성과 저장, 유지 되고 있다. 저장링에서 안정적으로 방사광을 추출하여 각종 실험 및 연구를 위하여 이를 제공하고 있다. 이를 위해서 전자가 매우 안정적이고 높은 집적도를 가진 전자다발 형태로 유지되어야 한다. 전자다발의 집적도가 높을수록 전자간의 상호 간섭으로 보유에너지가 더 빠른 시간에 소진되어 전자빔의 수명이 짧아진다. 3차 하모닉 RF 공동기는 전자다발의 운동방향으로 길게 늘려서 전자밀도를 줄여 전자빔의 운전수명을 개선하기 위한 장치이다. 공동기의 제작은 소재준비, 성형, 가공, 용접, 연마, 열처리 등의 여러 공정을 거쳐 완료된다. 본 보고서에서는 공동기의 제작 공정 중 전자빔을 이용한 시험용접, 본용접, 용접부 검사 및 용접부의 연마와 결과에 대하여 기술하였다.

• Journal of radiological science and technology
• /
• v.33 no.2
• /
• pp.127-132
• /
• 2010

The purpose of this study is to measure scattered ray which is occurred except for Z-axis range of the detector in MDCT's iso-center and present the basic data about the standard for reduction of scattered ray. The development of MDCT brings out the enlargement of beam thickness to the patient's Z-axis, which distributes to the increase in exposure dose according to the rise of scattered ray. Also MDCT brings out the increase of scattered ray about 4times more than SDCT. To evaluate scattered ray according to the change of beam thickness on MDCT, we measured scattered ray of MDCT's Z-axis beam thickness by using one 16-slice CTs and two 64-slice CTs. We used the ionization chamber 60ml 2026C as the equipment of measurement. In our results, we found out that the change of scattered ray according to the beam thickness in the same kVp has increase of scattered ray. Secondly we found out the increase of scattered ray according to the increase of kVp. Lastly we found out the decrease of scattered ray according to the increase of the distance from the ionization chamber.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.26 no.1
• /
• pp.18-24
• /
• 2006

Reactor core and internal structures of a liquid metal reactor (LMR) can not be visually examined due to an opaque liquid sodium. The under-sodium viewing technique by using an ultrasonic wave should be applied far the visual inspection of reactor internals. In this study, an ultrasonic waveguide sensor with a strip plate has been developed for an application to the under-sodium viewing technique. The Lamb wave propagation of a waveguide sensor has been analyzed and the zero-order antisymmetric $A_0$ plate wave was selected as the application mode of the sensor. The $A_0$ plate wave can be propagated in the dispersive low frequency range by using a liquid wedge clamped to the waveguide. A new technique is presented which is capable of steering the radiation beam angle of a waveguide sensor without a mechanical movement of the sensor assembly The steering function of the ultrasonic radiation beam can be achieved by a frequency tuning method of the excitation pulse in the dispersive range of the $A_0$ mode. The technique provides an opportunity to overcome the scanning limitation of a waveguide sensor. The beam steering function has been evaluated by an experimental verification. The ultrasonic C-scanning experiments are performed in water and the feasibility of the ultrasonic waveguide sensor has been verified.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.26 no.2
• /
• pp.84-89
• /
• 2006

A laser ultrasonic inspection system is a non-contact inspection device which generates and measures ultrasounds by using laser beams. A laser ultrasonic inspection system provides a high measurement resolution because the ultrasonic signal generated by a pulse laser beam has a wide-band spectrum and the ultrasonic signal is measured from a small focused spot of a measuring laser beam. In this paper, we have investigated the detection techniques of a surface-breaking crack by using the laser ultrasonic surface waves. A crack acts as a low pass filter whose cut-off frequency is lowered in proportion to the depth of a crack. And, the center frequency value of a spectrum is decreased in proportion to the depth of a crack. In this paper, we extracted the crack information by using the frequency attenuation from the normalized transfer function spectrum of a surface-breaking crack. Also, we effectively measured the crack depth by using the decreasing value of the center frequency from a crack passed ultrasonic signal. The proposed measuring techniques of crack depths provided more precise information than the amplitude measuring technique.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.18 no.3
• /
• pp.181-190
• /
• 1998

A computerized tomography system was developed using the X-ray source that has diameter of 5 micrometer. The system is used for the nondestructive testing of specimens with diameter below 20 mm. The convolution back projection algorithm was adopted for the reconstruction of cross sectional image, and the shape of the X-ray beam was let parallel beam or fan beam to compare each resultant image. Our CT system was constructed to operate based on the personal computer. The sectional images of the fabricated specimens were reconstructed and analyzed. The reconstructed images well coincided with real images taken with optical microscope and gave us enough reports on the defects in the ceramic specimen. The resolution of the system regarded as about $20{\sim}30$ micrometers.

• Proceedings of the KIEE Conference
• /
• 2008.11b
• /
• pp.72-73
• /
• 2008

최근 자동차 제조업과 조선산업 등에서는 용접구조물의 정밀 용접분야에 레이저-아크 하이브리드(Laser-Arc Hybrid) 용접기술 개발이 활발히 진행되고 있다. 이는 고속용접, 고밀도, 저열입량 등의 특징을 갖는 레이저 빔 용접과 저가, 넓은 GaP 연결능력 등의 특징을 갖는 기존의 아크 용접법의 장점을 결합하여, 양산시간을 단축하고, 생산비를 절감하며, 품질을 향상시키는데 목적이 있다. 이와 더불어 레이저-아크 하이브리드 용접부에 대한 검사 평가 기술에 대한 수요가 증가하고 있으며, 특히 박판(Thin Plate) 용접부의 비파피 검사 기술이 요구되고 있다. 본 논문에서는 자동차용 차체 모듈 생산 공정에서의 레이저-아크 하이브리드 용접부에 대한 초음파 비파괴 검사를 수행하였다.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.14 no.3
• /
• pp.172-176
• /
• 1994

Interpreted is the geometric signal in the angle beam ultrasonic testing for the pin-finger type of turbine blade roots. The geometry of the blade roots is described and the reflection conditions for appearance of the geometric signal are proposed. The general equation for its beam path is derived and verified. As the results, it is found that the geometric signal is the back reflection front the ligament edge, and its position and amplitude can be determined from the dimension of blade root and the beam directivity of transducer.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.33 no.5
• /
• pp.422-429
• /
• 2013

It is of great importance to localize leakages in complex pipelines for assuring their safety. A sensor array that can detect where leakages occur enables us to monitor a wide area with a relatively low cost. Beamforming is a fast and efficient algorithm to estimate where sources are, but it is generally made use of in free field condition. In practice, however, many pipelines are placed in a closed space for the purpose of safety and maintenance. This leads us to take reflected waves into account to the beamforming for interior leakage localization. Beam power distribution of reflected waves in a closed space is formulated, and spatial average is introduced to suppress the effect of reflected waves. Computer simulations and experiments ensure how the proposed method is effective to localize leakage in a closed space for structural health monitoring.