• 제목/요약/키워드: 건조 속도

Search Result 971, Processing Time 0.033 seconds

The Estimated Drying Schedules of Larix leptolepis and Pinus koraiensis (낙엽송과 잣나무재의 추정건조(推定乾燥)스케쥴)

  • Park, Jong-Su;Kim, Su-Chang
    • Journal of Forest and Environmental Science
    • /
    • v.11 no.1
    • /
    • pp.50-60
    • /
    • 1995
  • This study was carried out to estimate drying schedules of Larix Leptolepis and Pinus koraiensis by oven-drying at $100^{\circ}C$ which aimed to elucidate the characteristics such as current moisture content, drying process. initial check, collapse, internal check and drying rate during drying following each board thickness (2, 3. 4, 5, 6cm). the results were summerized as follows; Current moisture content of each board showed a rapid drying curve with the decrease of board thickness. At 20% moisture content, the drying rate of Larix leptolepis was higher than that of Pinus koraiensis and the drying rate of boards was lower with the increase of board thickness. From the estimated drying schedules. the initial conditions of drying of Larix leptolepis had to be milder than those of Pinus koraiensis and the boards thickness of 5cm, 6cm had to be most mild conditions.

  • PDF

Microwave-Vacuum Drying of Short Roundwoods and Wood Turneries (단척 통나무와 선반가공목의 마이크로웨이브-진공 건조)

  • Kang, Ho-Yang
    • Journal of the Korean Wood Science and Technology
    • /
    • v.29 no.4
    • /
    • pp.25-32
    • /
    • 2001
  • A microwave vacuum (MW/V) dryer was developed for drying short roundwoods, from which woodcraft souvenirs in Korean market are mostly made, and which were hardly dried without defects in a conventional kiln. It consisted of three 1.5 kW magnetrons of 2,450 MHz, a vacuum pump, a load cell of 100 kg and a cavity of $580{\times}580{\times}1,360\;mm^3$. A computer program was developed to switch on or off the magnetrons according to drying schedules, those were based on microwave injection time or the average of wood temperatures. To evaluate the new MW/V dryer the roundwood specimens of rigida pine, poplar and birch were dried. Their log diameters and lengths ranged from 125 to 25 em and from 25 to 50 cm, respectively. In spite of the presence of minor drying defects, the MW/V drying is found to be an effective method for drying short roundwoods. Wooden turneries made of red alder and ash logs were also MW/V dried from green to 4%MC without any degradation. The rates of the MW/V drying were examined for three different lengths of poplar logs.

  • PDF

생약재 추출물의 수율 및 항고혈압 활성

  • 도정룡;김기주
    • Proceedings of the Korean Society of Postharvest Science and Technology of Agricultural Products Conference
    • /
    • 2003.10a
    • /
    • pp.137.2-138
    • /
    • 2003
  • 본 실험에 사용한 생약재는 금산 약초시장에서 2003년 6월에 구입하여 추출수율을 조사하였다. 그 결과, 생약재의 물 추출물의 동결건조 중량(%)이 30~40%에 달하는 생약재는 가자, 갈근, 맥문동, 산수유가 있고, 20~30%에 달하는 생약재는 감초, 구기자, 당귀, 오미자, 천궁, 황기가 이에 속했으며, 중량(%)이 10~20%에 달하는 생약재는 복분자, 오수유, 애엽, 작약, 진피, 지유, 파고지, 황련이 이에 속했다. 마지막으로 10%이하의 추출 수율을 나타낸 생약재들은 가시오가피, 강황, 계피, 석곡, 소목, 영지, 오약, 육두구, 정향, 죽엽, 필발, 초두구, 호장근이 이에 속했다. 생약재의 70% Ethanol 추출물의 동결건조중량을 살펴본 결과, 동결건조 중량(%)이 30~40%에 달하는 생약재는 가자, 당귀, 산수유가 이에 속하였고, 20~30%에 달하는 생약재는 감초, 맥문동, 구기자, 오미자, 오수유, 천궁, 황기가 속하였으며, 동결건조 중량(%)이 10~20%에 달하는 생약재는 복분자, 육두구, 애엽, 작약, 정향, 지유, 파고지, 호장근, 황련이 이에 속했다. 또한 10% 이하의 수율을 나타내는 생약재는 가시오가피, 강황, 갈근, 계피, 석곡, 소목, 영지, 오약, 익지인, 죽엽, 필발, 초두구가 이에 속하였다. 생약재의 추출 시간 및 온도에 따른 수율을 조사한 결과, 추출 시간이 경과함에 따라서 수율이 점차 증가하는 경향을 보였으며, 가자, 갈근, 황련, 복분자, 지유, 정향, 계피, 소목 순으로 높은 수율을 얻을 수 있었다. 생약재에 여러가지 효소를 이용한 가수분해 결과, 대부분의 생약재에 대해 95$^{\circ}C$에서 2시간동안 추출한 수율과 그다지 큰 차이는 보이지 않았지만 대부분의 생약재가 Termamyl 효소를 사용하여 가수분해하였을 때 가장 높은 수율을 나타내었다. 또한 지유의 경우는 Viscozyme 효소를 처리하였을 경우 가장 좋은 수율을 나타내었다. 또한, 효소의 최적 온도로 조정한 Water bath에서 0, 30, 60, 120, 210분간 효소 반응 시켜, 420nm에서 갈변도를 시간별로 측정해본 결과, Viscozyme 효소를 처리한 생약재에서 시간이 흐름에 따라 흡광도 수치의 변화가 크게 나타났다. 32종의 생약재 물 추출물의 항고혈압 활성을 측정한 결과, 파고지, 소목, 죽엽의 항고혈압 활성이 높은 것으로 나타났으며, 파고지의 효과가 가장 우수한 것으로 나타났다. 10%에탄을 추출물의 경우에는 오미자, 오수유, 소목에서 항고혈압 활성이 높은 것으로 나타났으며, 오미자의 효과가 가장 우수한 것으로 나타났다. 파고지 물 추출물을 칼럼(Sephacryl S-300, High Resolution)으로 분획하여 3개의 Peak를 얻었으며, 2번째 Peak의 항고혈압 활성이 매우 높은 것으로 나타났다.

  • PDF

Drying Rate and Physicochemical Characteristics of Dried Ginseng Root at Different Temperature (열풍건조온도에 따른 수삼건조속도 및 건조수삼의 이화학적 특성)

  • 하대철;이종원;도재호;박채규;류기형
    • Journal of the Korean Society of Food Science and Nutrition
    • /
    • v.33 no.4
    • /
    • pp.741-746
    • /
    • 2004
  • Drying of raw ginseng root down to 35% moisture content required for extrusion process. There were two kinds of pre-treatments of raw ginseng root which were chopping and whole-root ginseng before frying at 80, 100 and 12$0^{\circ}C$. Drying rate and physicochemical properties of dried ginseng were evaluated to determine optimum drying temperature for extrusion process. Drying time at 8$0^{\circ}C$ to decrease to 35% moisture was 6.5 hr and ginsenoside content in dried ginseng at 8$0^{\circ}C$ was lower than that of dried ginseng at 100 and 12$0^{\circ}C$. Drying time at 100 and 12$0^{\circ}C$ to decrease to 35% moisture was 5.5 and 3.5 hr and redness of dried ginseng powder was 5.20 and 7.23 respectively. Browness and redness of dried ginseng extract from 75% ethylene were significantly increased with the increase in drying temperature. Ginsenosides Rb1, Rb2, Rc, Rd, Rg1 and total saponin were also increased with the increase in drying temperature from 8$0^{\circ}C$ to 10$0^{\circ}C$, however, those were not significantly different with drying temperature at 100 and 12$0^{\circ}C$. Drying temperature for extrusion process can be optimal at 10$0^{\circ}C$.

A Study on Application of Enzyme Additives to Improve Drying Speed of Urushi Lacquer (옻칠의 건조속도 향상을 위한 효소첨가제 적용 연구)

  • PARK, Ji Hyeon;PARK, Jung Hae;KIM, Soo Chul
    • Journal of the Korean Wood Science and Technology
    • /
    • v.48 no.3
    • /
    • pp.326-344
    • /
    • 2020
  • Laccase was applied to improve the drying speed of urushi lacquer to confirm a potential use of laccase as an enzyme additive. As a result of applying laccase of lacquer and white-rot fungi, drying times for both Korean and Chinese specimens were reduced. All of the specimens to which laccase was applied were dried(set to touch) within 60 minutes from the start of the drying, and the drying rate was improved as the content ratio of laccase increased. In addition, although there were differences in hardening drying time between Korean and Chinese lacquers, it was confirmed that hardening drying took place even at room with temperature of 20 ± 2 ℃ and humidity of 55-60%. As a result of lacquer layer analysis of the dried specimens, the drying speed was improved when the content ratio of laccase to urushiol was 5:1, and there were no differences in chromaticity and adhesion, confirmed that the layers were stable. It was observed that the gloss of both Korean and Chinese lacquers were reduced when laccase was applied. However, according to the analysis of FT-IR and Py-GC/MS, the changes in components were not as sufficient to affect the physical properties. Thus, its applicability as an additive was confirmed.

Drying Rate and Drying Defects of Populus euramericana Using the SDR(Saw-Dry-Rip) Process (SDR(Saw-Dry-Rip) 방법(方法)을 적용(適用)한 이태리 포플라 재목(材木)의 건조속도(乾燥速度)와 건조결함(乾燥缺陷))

  • Sim, Jae-Hyeon;Jung, Hee-Suk
    • Journal of the Korean Wood Science and Technology
    • /
    • v.14 no.3
    • /
    • pp.3-15
    • /
    • 1986
  • This study was carried out to investigate the drying rate and drying defects of Populus euramericana using the SDR (Saw-Dry-Rip) process. Flitches for SDR process were rough edged for compact kiln stacking, and then kiln-dried to 10 percent moisture content with dimensions in the same run, using the kiln-drying schedule ($T_8-F_4$) recommended by Rasmussen. The results obtained were as follows: 1. Drying rate of dimensions was slower than that of flitches. 2. Final moisture content and moisture distribution of dimensions were lower than those of flitches. 3. Average bowing, cupping, crooking, and twisting were reduced 20 percent, 25 percent, 54.9 percent, and 13.4 percent by SDR process respectively. 4. Bowing and cupping were more severe in dimensions from the area near the pith than in those from the area near the bark, and for crooking and twisting the reverse was true. 5. Surface checking of dimensions developed less than that of flitches and end checking of dimensions was similar to that of flitches. 6. Honeycomb, thickness shrinkage, and collapse of dimensions were similar to those of flitches. 7. The degree of casehardening of dimensions was higher than that of flitches.

  • PDF

A Study on Drying Kinetics of Low Rank Coal(Indonesia-IBC) through the Fixed-Bed Reactor Experiments (저등급석탄(低等級石炭)(인도네시아 IBC)의 고정층(固定層) 반응기(反應器) 실험(實驗)을 통한 건조(乾操) 반응속도론(反應速度論) 연구(硏究))

  • Kang, Tae-Jin;Jeon, Do-Man;Jeon, Young-Sin;Kang, Suk-Hwan;Lee, Si-Hyun;Kim, Sang-Do;Kim, Hyung-Taek
    • Resources Recycling
    • /
    • v.19 no.6
    • /
    • pp.43-50
    • /
    • 2010
  • The crisis of energy gives rise to the growing concerns over continuing uncertainty in the energy market. Under these circumstances, there are also increasing interests on coals. In particular, Low Rank Coal (LRC) is receiving gradual attentions from green industry. But due to is high moisture content range from 30 - 60%, drying process has to be preceded before being utilized as power plant. In this study drying kinetics of LRC is induced by using a fixed-bed reactor. The drying kinetics was evaluated in from of the particle size, the inlet gas temperature, the drying time, the gas velocity, and the LID ratio. The consideration of the reynold's number was taken for correction of gas velocity, particle size and LID was taken for correction of reactor diameter, packing height of coal. As being seen as characteristic of drying coal, it can be found that fixed-bed reactor can contributed to active drying of free water. In this sense, it could be considered that phase boundary reaction is appropriate mechanism.

Drying and Shrinking Characteristics of Food 2. Influencing Factors in Drying and Shrinking Characteristics of Sea Tange (식품의 건조 및 수축특성에 관한 연구 - 2. 다시마의 건조 및 수축특성에 영향을 미치는 인자 -)

  • CHO Duck-Jae;HUR Jong-Hwa;CHUNG Soo-Yeol
    • Korean Journal of Fisheries and Aquatic Sciences
    • /
    • v.21 no.1
    • /
    • pp.16-20
    • /
    • 1988
  • Square slices of sea tangle was dried in hot air drier that could be controlled air temperature, relative humidity and air velocity. Under various drying conditions, drying and shrinking characteristics were investigated. 1) During drying sea, tangle, the constant rate period was nonexistant and the falling rate could be devided into a 2 periods, namely, a first falling rate period and a second falling rate period. 2) The tip part was proceeded more shrinkage than base part, and under drying condition of air temperature $50^{\circ}C$, relative humidity $30\%$, air velocity 0.4m/s, when the moisture content was reduced to $20\%$, the shrinking ratio of tip part, middle part and base part were 57.5, 54.0 and $42.7\%$, respectively. 3) The drying shrinking and drying rate increased with decreasing relative humidity, but when the moisture content was reduced to $20\%$, the shrinking ratio increased with increasing relative humidity.

  • PDF

Effect of Vapor-dam Treatment on the Air Circulating oven Drying Characteristics of Bamboo Tubes (수증기댐 처리가 통죽(筒竹)의 송풍오븐건조 특성에 미치는 영향)

  • Lee, Nam-Ho;Jung, Hee-Suk;Hayashi, Kazuo;Li, Cheng-Yuan;Zhao, Xue-Feng;Hwang, Ui-Do
    • Journal of the Korean Wood Science and Technology
    • /
    • v.35 no.1
    • /
    • pp.11-16
    • /
    • 2007
  • This study was carried out to investigate the effect of Vapor-dam treatment on drying drying rates, prevention of checks and V-shaped split during air circulating oven drying bamboo (Phyllostachys pubescens Mazel et Z) tube. It was shown that the drying time from green to around 7~8 % of moisture content was required less as drying schedule was more severe, and distinctly dominated by the drying rate during the initial drying stage. Area shrinkages in cross section and thickness shrinkages measured during air circulating oven drying test were very large. Surface checks and V-shaped splits were occurred in untreated samples just after the beginning of drying, while sixty seven percentages of all the Vapor-dam treated samples could be produced without drying defects. The V-shaped splits occurred in the Vapor-dam treated samples were influenced more by the sealing of the vapor evaporation through the cross section than drying schedule.

An Experimental Study on Engineering Characteristics of Wet Dredged Soil and Dry Dredged Soil after Chemical Treatment (습윤준설토와 노건조준설토의 약품처리 후 공학적 특성에 관한 실험적 연구)

  • Chang, Yongchai;Park, Kiyoun;Park, Jongcheol;Lee, Ingyu
    • Journal of the Korean GEO-environmental Society
    • /
    • v.13 no.3
    • /
    • pp.71-76
    • /
    • 2012
  • Since sediment in a stable state is disturbed during the process from sediment in a natural state to dredged soil, the turbidity of water is not good. When the dredged soil settles again, the volume change in the sediment occurs. Coagulant and flocculant are added for turbidity mitigation of the water and faster settling process of suspended solid, and the amount of the substances affects the characteristics of the dredged soil. This study is to investigate the characteristics of the dredged soil depending on the amount of three chemical products added to the wet dredged soil and the dry dredged soil through measuring the suspended solids (SS), volume change and sedimentation velocity. The experimental measurements show that the SS decreased, the volume change rate increased, and the sedimentation velocity increased, as the chemical amount increased. In addition, it was found that the dry dredged soil reacted even with little quantity of the chemicals because derelict and microorganism are removed due to the drying process at $100{\pm}5^{\circ}C$.