• Korean Journal of Agricultural Science
• /
• v.5 no.1
• /
• pp.15-28
• /
• 1978

It has been known that the shear strength of soil is an important design parameter for the foundation of structures, the retaining walls, the slope failures and so forth. In this study, the shear test was performed by using the direct shear apparatus under various degree of the moisture content and the density of the sample soils. The results of the study were summarized as follows; 1. The shear strength of soil increased with increase in the dry density of soil, and at the same level of density of the sample the shear strength of soil showed large values on a good grading of the sample. 2. The cohesion of the soil varied directly with the dry density of it, however the internal friction angle of soil was not affected by the dry density of tile sample. 3. The shear strength of sample varied inversly with the moisture content of it, and this phenomenon was apparent on a good grad ing of sample. 4. The cohesion of soil showed maximum value when the moisture content of the soil reached optimum level and the internal friction angle decreased with increase in the moisture content of it. These phenomena were very obvious on a good grading sample, SDC-1. 5. The cohesion of the soil decreased with increase in void ratio of the sample, but the internal friction angle of the sample didn't show such tendency.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2011.11a
• /
• pp.53-54
• /
• 2011

The facilities producing the nuclear energy chosen for resolving the recent global energy problem have been increasingly constructed, and hence more frequent durability tests on radiation shielding concrete are required due to NPP(Nuclear Power Plant) life extension and increase of radioactive waste repositories. Bulk dry density is one of the critical factors ensuring the durability and performance of the radiation shielding concrete because the design of the radiation shielding reinforced concrete structures for NPPs is based on the bulk dry density of the concrete. Bulk density of unconsolidated shielding concrete can be calculated utilizing a test assuring to satisfy the bulk dry density, or existing credible data set. This study evaluated correlation between bulk density and bulk dry density of the concrete used for Korean NPPs (y=1.0913X-0.2458) and developed a correlation expression considering standard deviation of bulk dry density (y=1.0913X-0.3358).

• Proceedings of the Korea Water Resources Association Conference
• /
• 2010.05a
• /
• pp.541-545
• /
• 2010

식생이 소실된 산불 피해 지역에서 유실되는 토양의 식생회복에 따른 정량적인 변화를 파악하고, 사면토양과 유실토양의 성분분석을 수행하여 이화학적 특성을 파악하고자 한다. 산불 이후 10개의 조사구에서 강우에 의해 유실토양의 양을 측정한 후 토양을 건조시켜 보관하였다. 토양의 입도분석, 유기물함량, 건조밀도 등을 조사하였다. 그리고 전처리한 토양수는 ICP를 이용하여 Fe, Mn, P, Al, Zn, Na, Mg, K, Ca의 성분분석을 수행하였다. 산불 이후 시간경과에 따른 조사구별 식생 회복은 빠른 지역과 느린 지역으로 크게 구분한다. 재생이 불량한 지역은 재생이 왕성한 지역에 비해 상대적으로 많은 양의 토양이 유실되었다. 사면토양의 성분분석 결과 재생불량 지역의 성분함량이 가장 작았으며, 재생왕성 지역은 비피해지에 비해 성분함량이 대체로 높았다. 유실토양의 성분분석 결과 식생회복이 느린 조사구에서 영양염류 함량이 대체로 낮았다. 그러나 식생회복이 느린 조사구에서 많은 양의 토양이 유실되기 때문에 정량적인 영양염류의 소실량은 가장 많았다. 따라서 지표식생이 없는 지역은 다량의 토양유실로 인해 다량의 영양염류가 소실되어 식생 재생을 더디게 만드는 것으로 판단된다.

• Journal of the Mineralogical Society of Korea
• /
• v.19 no.2 s.48
• /
• pp.89-98
• /
• 2006

The thermal conductivities of bentonite blocks with various dry densities (1.6 and $1.8g/cm^3$), water contents (5, 9.4, 15, 20 wt%) and sand contents (0, 10, 20, 30 wt%) were measured in order to investigate the improvement in physical performance of buffer as an engineered barrier. The raw material was domestic bentonite from Oksan mine located in Gyeongju city. The increase in water content was most effective for improving the thermal conductivity. Especiallly, the bentonite blocks with more than 15 wt% of water content showed more than 1.0 W/mK values of thermal conductivity regardless of their dry densities and sand contents. Therefore, if the domestic Oksan bentonite is used as a buffer material, we can suggest that the manufacture of bentonite block having dry density of $1.6g/cm^3$, sand content of $10{\sim}30$ wt% and water content of 15 wt% will be most effective considering the easiness of a manufacturing of bentonite block and the efficiency of an increase in the thermal conductivity.

• Clean Technology
• /
• v.12 no.4
• /
• pp.232-237
• /
• 2006

The zinc-based desulfurization sorbents for a fluidized-bed system were prepared by a spray drying method and the effects of the pH and viscosity of the slurry on the attrition resistance of the prepared sorbents were investigated in this work. In order to improve the attrition resistance, alumina sol was used for an inorganic binder and pH of the slurry was changed for its better dispersion in slurry. The attrition resistance of the prepared sorbents decreased due to the phase transition of alumina sol to gel as the slurry pH increased to its basicity. The optimum pH condition for the good attrition resistance of the sorbents was about 6.0 in this study. It was confirmed that the attrition property of the sorbents were varied with the viscosity of the slurry. The attrition resistance of the sorbents prepared by the spray drying method increased as their bulk density increased, while it decreased as the surface area and porosity of the sorbents. The optimum viscosity for the high attrition was in the range 400-500 cP.

• Journal of the Korean earth science society
• /
• v.38 no.2
• /
• pp.150-160
• /
• 2017

In order to determine the porosity of rock, the 'standard test method for porosity and density of rock' proposed by the Korean Society for Rock Mechanics is commonly used. However, the standard test method, which uses a drying oven, takes 8 to 24 hours to complete the test in taking samples out of the oven every four hours and measuring the weight of the specimen. To complement these disadvantages, we devised a method for measuring rock porosity by using a microwave oven. The devised method reduced the cause of errors and the inconvenience occurred in the process of weighing samples by constructing a weight monitoring system, which monitors the drying process. A suitable heating/pause time was set up to maintain the temperature of sample below $105{\pm}3^{\circ}C$ in drying process, and an alarm system was implemented in order to stop drying process when the weight change of the rock sample is within 0.1% of the initial weight. The porosity was determined from the dry weight of the sample, which was obtained by the curve fitting of weight monitoring data. Then, the porosities obtained by using the microwave oven were compared with those obtained by the standard test method. Test results using sandstone samples showed that the porosities obtained by a microwave oven was similar to those obtained by the standard method and the porosity difference between two methods was as large as 0.4%. In addition, repeated porosity measurement using the same specimen showed that the standard deviation of the porosity, which reflects the precision of the measurement was as good as 0.23%. Therefore, a microwave oven porosity measurement system can give the porosity of rock samples with high reliability.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.39 no.6
• /
• pp.99-110
• /
• 1997

The study was conducted in order to investigate the basic geotechnical properties of sand-bentonite mixtures with the various bentonite contents. The results obtained are as follows : 1. Optimum moisture content of sand-bentonite mixtures was approximately 17.10~18.52% corresponding to the maximum dry density of 1.58~1 .64gf/$cm^3$. As the bentonite contents and curing peroid increased, both the maximum dry density and optimum moisture content of sand-bentonite mixtures increased. 2. The unconfined compressive strength of sand-bentonite mixtures increased as the increase of bentonite content, but it did not change along the curing period. 3. The sand-bentonite mixtures ruptured at 8~15% of the axial strain and the maxi-mum shearing stress was about O.7Okgf/$cm^2$. 4. According to the increase of bentonite content, the cohesion intercept and internal friction of the sand-bentonite mixtures increased slightly in the shear test, while the cohesion intercept increased largely, and the internal friction angle decreased largely in the triaxial test. 5. Both the initial void ratio and swelling of the sand-bentonite mixtures were very low with respect to the consolidation pressure increase. 6. The swelling and shrinkage of sand-bentonite mixtures increased slightly according to the increment of bentonite content.

• Fashion & Textile Research Journal
• /
• v.20 no.4
• /
• pp.457-463
• /
• 2018

This study examined the water absorption and drying properties of the thirteen types of the knitted fabrics for sports wear. These physical properties were analysed with relation to the constituent fiber cross-sectional shape and structure parameters of the knitted fabrics by regression analysis. Absorption and drying properties of the knitted fabric specimens were increased with increasing the porosity of the constituent yarns, which was attributed to the capillary channels in the yarns. The water absorption and drying properties were increased and decreased with increasing tightness factor and stitch density of the knitted fabric. The absorption property of the knitted fabric for perspiration absorption and fast dry sport-wear clothing was mostly influenced mostly by fiber cross-sectional shape and its characteristics, whereas, drying property was dependent on the structural parameters of the knitted fabric such as tightness factor and stitch density. Therefore, superior perspiration absorption and fast drying knitted fabric could be obtained in the fabric structure with optimum tightness factor and stitch density, and constituent yarn structure with non-circular fiber crosssection and high porosity. GATS method and MMT method are used to measure sweating fast drying properties and it is necessary to carry out studies using these measurement methods in order to compare with the results of this study.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 1995.05a
• /
• pp.230-235
• /
• 1995

염-암모니아계 화학열펌프기술의 핵심인 전도성 블록의 특성파악을 위한 기초단계 연구로서 전도성 블록의 제조 및 기초물성분석에 관한 연구를 수행하였다. 황산이 함유된 천연흑연을 열처리하여 팽창흑연을 준비하고 특성을 분석하였다. 이 팽창흑연을 압축, 성형하여 흑연지지체를 제조하였으며, 성형된 지지체에 진공기법을 이용하여 염을 함침하고 건조과정을 거쳐 전도성 블록을 제조하였다. 전도성 블록의 특성분석으로서 염의 입자내에 분산정도는 EPMA/EDS, 기공율 및 기공크기 분포는 헬륨침투법과 수은 침투법, 기체투과도는 Darcy's law를 적용하고, 열전도도 측정은 전이 일차원 열류기법을 이용하였다. 전도성 블록이 암모니아와 반응 했을때 부피팽창을 관찰하였으며, 반응기에서 전도성블록의 온도분포를 관찰하였다. 본 연구에서 제조된 블록은 염이 균일하게 분산되어 있었으며 기공율은 제조조건에 따라 0.4 ∼ 0.83, 기체투과도는 0.01 ∼ 10 Darcy, 열전도도는 흑연지지체의 겉보기 밀도가 110 kg/㎥ 인 경우, 반지름방향의 열전도도, λr은 20 W/mK, 축방향의 열전도도, λa는 17 W/mK 이였다. 겉보기밀도가 150 kg/㎥ 인 경우, λr은 22 W/wK, λa는 20 W/wK 이였다. 전도성 블록의 부피팽창은 비가역적이었으며 대부분이 반지름 방향보다 축방향에서 팽창이 일어났다. 온도분포는 초기 반응의 kinetics가 내부온도를 지배하였으나, 시간이 경과후 반응기 내부온도는 외부열전달에 의해 지배되었다.

• Journal of the Korean Geotechnical Society
• /
• v.19 no.2
• /
• pp.57-64
• /
• 2003

The liquefaction potential of saturated sands under seismic loading conditions has been carefully considered by many investigations. Typical of these investigations is the laboratory determination of cyclic strength of sands by means of cyclic triaxial tests. This study was conducted to investigate the effects of the method of sample preparation on the liquefaction characteristics of remolded samples of saturated uniform sands. Cyclic triaxial tests were performed on saturated uniform sand compacted to the same density by 3 different procedures of pluvial compaction through air, pluvial compaction through water and vibratory compaction. It was validated that the cyclic stress ratio of remolded saturated uniform sands by different compaction procedures at the same density was very different.