• Journal of Drive and Control
• /
• v.12 no.4
• /
• pp.35-40
• /
• 2015

A gas spring provides support force for lifting, positioning, lowering, and counterbalancing weights. It offers a wide range of reaction force with a flat force characteristic, simple mounting, compact size, speed controlled damping, and cushioned end motion. The most common usage is as a support on a horizontally hinged automotive tail gate. However, its versatility and ease of use has been applied in many other industrial applications ranging from office equipment to off-road vehicles. The cylinder of a gas spring is filled with compressed nitrogen gas, which is applied with equal pressure on both sides of the piston. The surface area of the rod side of the piston is smaller than the opposite side, producing a pushing force. The magnitude of the reaction force is determined by the cross-sectional area of the piston rod and the internal pressure inside the cylinder. The reaction force is influenced by many design parameters such as initial chamber volume, diameter ratio, etc. In this paper, we investigated the reaction force characteristics and carried out parameter sensitivity analysis for the design parameters of a gas spring.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2015.05a
• /
• pp.192-193
• /
• 2015

The number of accidents is raising every year and severity is also increasing. A lot of studies are interested in the leading indicator such as safety culture or safety audit to reduce accidents. In particular, the studies on safety awareness are actively conducted. However, these studies showed that there was consciousness of scapegoatism which to pass responsibility of accident causes to others regardless of safety awareness. It means that there are probability about overestimating and making light of unsafe condition and act which have to manage and control. Eventually, the direct causes which lead to the fatal accident may be consistently arisen. Nevertheless, researches about consciousness of scapegoatism are shortage. Therefore, this study proposed the means to investigate the relationship between consciousness of scapegoatism and accidents through report from KOSHA and conducts the survey with suggested means. This paper will contribute to prevent accidents by identifying relationship between consciousness of scapegoatism and accidents.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2016.05a
• /
• pp.345-349
• /
• 2016

보본체와 물받이공을 보호하는 바닥보호공(bed protection)은 굴요성 구조(flexible structure)인 돌망태, 블록공, 사석 등으로 설치되어야 하며, 일반적으로 경제성과 시공성이 우수한 사석(riprap)이 많이 이용된다. 이때 사석의 안정성 확보를 위한 설계기준으로 국내의 경우 포설길이에 대해서만 제시하고 있으나, 외국의 경우 수심, 유속 등의 값을 기초로 사석의 크기, 포설두께, 포설길이를 산정할 수 있도록 상세하게 제시하고 있다. 이와 같은 실정으로 국내 하천 실무자들이 바닥보호공을 설계 할 때 하천설계기준을 바탕으로 블라이 공식 또는 국립건설시험소 공식을 적용하여 사석의 포설길이는 산정하지만 사석의 크기, 중량 등의 제원들은 외국 설계기준을 차용하여 산정하거나 생략하는 경우도 있다. 따라서 하천설계기준의 보완 및 최근 국내 주요하천에서 발생하는 바닥보호공 유실, 침하 등의 문제를 해결하기 위한 연구가 필요하다. 본 연구는 전산유체동역학(Computational Fluid Dynamics, CFD) 모형인 FLOW-3D 모형을 이용하여, 바닥보호공 주변 흐름에 대한 수치모의를 수행하였다. 이때 난류 모형은 LES (Large Eddy Simulation) 모형을 적용하였으며, 바닥보호공에 작용하는 비교적 작은 척도의 와(vortex)를 해상할 수 있도록 조밀한 격자를 부여하였다. 초기 수치모형 결과의 적정성은 수리실험 결과와 비교하여 판단하였으며, 수리실험을 잘 재현해내는 격자, 매개변수 등을 적용하여 보의 하류 수위 변화에 따른 유속, 난류강도 등에 대한 분석을 수행하였다. 본 연구 결과는 바닥보호공 설계를 위한 기초자료로 활용될 수 있으며, 향후 수리실험과 병행하여 국내 실정에 맞는 설계식 개발에 대한 연구가 필요한 것으로 보인다.

• Journal of Drive and Control
• /
• v.16 no.2
• /
• pp.43-50
• /
• 2019

The objective of this study was to reverse engineer a swash plate type piston pump mounted on a wheeled armored vehicle and to analyze the structure of the pump case. From the analysis, the weak parts were identified and corrected in the final design. Each element corresponding to the piston pump case was analyzed. The analytical method was given static boundary conditions, load conditions and confirmed displacement, strain, stress, and safety factor. Plastic deformation and damage were also confirmed and the component elements redesigned through structural analysis Structural analysis and vibration analysis were carried out for the components of the piston pump case. The piston pump model was finally modified by structural analysis and vibration analysis results for each component assembly, and a prototype was designed. Durability test and environmental test were carried out and the test results satisfied all of the requirements. Therefore, the analytical method presented in this study can be utilized as a methodology for element component design in the development of various piston pumps.

• Journal of Drive and Control
• /
• v.16 no.1
• /
• pp.14-21
• /
• 2019

Axial piston pump is a significant part in wheeled armored vehicle, for generating hydraulic power of vehicle power system. The Axial Piston Pump is a high-performer, core functional item that is developed and applied to most of the military models in the development of military weapon systems. However, in the case of military equipment, there are conditions of limited size and weight required depending on the operating conditions and the operating environment. Under these conditions, it is required that the performance and the environmental resistance are verified to exert the required output. A unique technology is needed for the development of such equipment both in the present and in the future. Therefore, in this study, mathematical modeling of an axial piston pump is presented as a basic data for securing proprietary technology. In addition, a simulation model is designed and compared with the models of six kinds of pistons through simulation. It was established that when the number of pistons of the axial piston pump, which is the development objective, is seven, the model is suitable for the wheeled armored vehicle.

• Journal of Drive and Control
• /
• v.20 no.3
• /
• pp.9-14
• /
• 2023

In this paper, the selection of a reliable accelerated life test code for a 2-ton forklift was accomplished by choosing the driving resistance coefficient failure-free test time based on a 10,000-hour B₁₀ life. The overall life and average equivalent load of the vehicle were then calculated based on actual driving test conditions using the selected driving resistance coefficient. The gear train's accelerated life test code was selected by adjusting the equivalent load to a torque and rotation speed that did not exceed 125%(about 75HP) of the vehicle rated power. The safety of the test standards was validated by conducting an actual accelerated life test utilizing the proposed test method in this study and comparing the test result with the corresponding theoretical value. It is anticipated that the reliability of the accelerated life test in this paper will be enhanced, by incorporating actual driving performance data collected directly from the forklift and adjusting the conditions used in developing the accelerated life test code.

• Journal of Korea Water Resources Association
• /
• v.56 no.5
• /
• pp.363-371
• /
• 2023

In this study, the validity of the Korean expression for tsunami will be examined and a method to use it correctly will be proposed. First, we will review the scientific definition of the tsunami and the origin of the tsunami expressed in various languages. Based on this review, after reviewing whether the Korean expression 'Jijinhaeil', which is currently used representatively in Korea, a reasonable method that can be used appropriately will be proposed. In conclusion, it is suggested that the Korean pronunciation of tsunami should be used in a uniform manner as in the case of English and other languages.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.15 no.6
• /
• pp.599-612
• /
• 2013

This study aims to investigate an economical efficiency of two excavation methods with respect to the room-and-pillar method for the underground space and conventional excavation method, i.e. 2-arch tunnelling method. For feasibility study, an excavation cost for both room-and-pillar method and 2-arch tunnelling method was estimated when the same space in operation was required. It was assumed that properties of reinforcements and rock were adopted from literatures. However, an excavation shape of the room-and-pillar method was assumed not to be the rectangular shape which is a general type in the room-and-pillar method but to be an arch shape in order to compare with the conventional excavation method (2-arch tunnelling) and to achieve the maximum bearing capacity of the structure during excavation. Consequently, the wider space in use or required and the better condition of rock we assumed, the more economical advantage we have in the room-and-pillar method than the 2-arch tunnelling method.

• Tunnel and Underground Space
• /
• v.27 no.4
• /
• pp.230-242
• /
• 2017

Seismic velocities measured from in-situ tests (n=177) and through rock core samples (n=1,035) are reviewed in light of construction standards, widely used standards as a first-hand approximation of rock classification solely based on seismic velocities. In-situ down hole tests and refraction survey for soft rocks showed seismic velocities of 1,400~2,900 m/s which is faster than those specified in construction standards. For moderate~ hard rocks, in-situ down hole tests and refraction survey showed 2,300~3,800 m/s which roughly corresponds with the range specified in the construction standards. A similar trend is also observed for seismic velocities measured from rock core samples. The observed differences between construction standards and seismic velocities can be explained in two ways. If construction standards are correct the observed differences may be explained with seismic velocities affected by underlying fast velocities and also possibly with selection of intact cores for velocity measurement. Alternatively, construction standards may have intrinsic problems, namely artificial discrete boundaries between soft rocks and moderate rocks, application of foreign standards without consideration of geologic setting and lack of independent verification steps. Therefore, we suggest a carefully designed verification studies from a test site. We also suggest that care must be exercised when applying construction standards for the interpretation and accessment of rock mass properties.

• Korean Journal of Construction Engineering and Management
• /
• v.18 no.3
• /
• pp.33-41
• /
• 2017

A modular specification is a contract document that specifies the requirements of production, transformation and installation in a modular construction. A problem of the currently used specification is that it does not guarantee the level of performance required by the modular construction and fails to accommodate unique characteristics of each construction because it widely uses the standard specification as it is. This study proposes a specification that reflects the unique feature of modular construction in order to improve the quality of modular construction. Research focuses on the leakage in waterproof and mechanical equipment because it is the area with the highest rate of defects. This study suggests ways to improve the modular specification as follows: 1)Descriptive specifying (following MasterFormat) 2)Propose leakage verification method and test clause 3) Reflect characteristic of modular construction. Proposed modifications to modular specification are reviewed by experts for validation and their opinion verifies suggested improvements as a way to secure the quality of modular construction and to promise characteristics of the modular specification. This improvement will be used for reference when writing construction project specification, which can be an important contract document, so that it could lower occurrence rate of the modular defects.