• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2000.05a
• /
• pp.191-194
• /
• 2000

최근의 삼풍백화점 붕괴사고 및 성수대교사고 등 대형사고의 원인을 살펴보면 건물의 안전진단 미비와 구조물의 안전관리 진단판정미비로 건축물의 붕괴를 예측하지 못한 결과이다. 이는 모든 불확실 시스템의 상태를 적당한 항목으로 판정 정규화한 계수값으로 나타내어 예방하지 못한 결과이다. 비단건축물 시스템뿐 아니라 실존 가시물(可視物)과 비가시물(悲歌視物)에 대해서도 비결정 상황의 상태표시계수를 예측하여 정규값으로 나타낼 필요가 있다. 즉, 교통도로의 교통량 특정, 통신신호의 수신율 측정 등을 최적화 예측할 수가 있게된다. 본 논문에서는 환경 및 시스템 출력값에 표시하여 어떤 결과를 가져오는지 확인하기 위하여 평면 상의 임의의 데이터의 조합으로부터 특정 데이타를 선택 최적화하는 과정을 실험화 하였다.

• Journal of the Korea Convergence Society
• /
• v.9 no.12
• /
• pp.189-194
• /
• 2018

This study is 24 person emergency brake for the structural analysis are described. Recently emerged as a key point of the elevator safety and increase the need for an emergency brake was developed accordingly to ensure the safety of the brake tool for 3D design using Solid Works. ANSYS utilizes 24 person emergency break finite element model for total deformation, strain and stress were obtained.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.9 no.4
• /
• pp.231-236
• /
• 2011

When the Fukushima nuclear power plant accident occurred in March of 2011, a hydrogen explosion in the reactor building at the 4th unit of Fukushima plants led to a big surprise because the full core of the unit 4 reactor had been moved and stored underwater at the spent nuclear fuel storage pool for periodic maintenance. It was because the possible criticality in the fuel storage pool by coolant loss may yield more severe situation than the similar accident happened inside the reactor vessel. Fortunately, it was assured to be evitable to an anxious situation by a look of water filled in the storage pool later. In the paper, the safety state of the spent fuel storage pool and rack structures of the domestic nuclear plants would be roughly reviewed and compared with the Fukushima plant case by engineering viewpoint of potential severe accidents.

• Fire Science and Engineering
• /
• v.19 no.3 s.59
• /
• pp.20-27
• /
• 2005

This paper evaluates the fire safety level of eight pump rooms in the nuclear power plant using a fire model, CFAST We estimate the Conditional Core Damage Probability (CCDP) of each room based on the analyzed results of CFAST Eight rooms located on the primary auxiliary building of the nuclear power plant are high pressure safety injection pump room A/B, low pressure safety injection pump room Am. containment sprdy pump room A/B, and motor-driven auxiliary feed water pump room A/B. The upper layer gas temperature of each room is estimated and the integrity of cable is reviewed. Based on the results, the integrity of the cable located at the upper part of compartment is maintained without thermal damage. The Conditional Core Damage Probability Is reduced to half of the old values. Accordingly, the fire safety assessment for eight pump rooms using the fire model will be capable of reducing the uncertainty and to develop a more realistic model.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2021.07a
• /
• pp.17-20
• /
• 2021

본 연구는 인원 계수에 딥러닝 알고리즘을 적용한다. 인원 계수는 안전 관리 분야, 상업 분야에 적용될 수 있다. 예를 들어, 건물 내 화재 발생 시, 계수된 인원을 활용하여 인명 피해를 최소화할 수 있다. 다른 예로, 유동인구 데이터를 기반으로 상권을 분석하여 경제적 효율성을 극대화할 수 있다. 이처럼 인원 데이터의 중요성이 증가함에 따라 인원 계수 연구도 활발하다. 그 예로, 객체 탐지(Object Detection) 같은 딥러닝 기반 인원 계수, 센서 기반 인원 계수 등이 있다. 본 연구에선 딥러닝 알고리즘인 VGGNet을 사용하여 인원을 계수했다. 결과로 Mean Absolute Percentage Error(이하 MAPE)는 약 5.9%의 오차율을 보였다. 결과 확인 방법으로는 설명 가능한 인공지능(XAI) 알고리즘 중 하나인 Grad-CAM을 적용했다.

• Land and Housing Review
• /
• v.4 no.2
• /
• pp.185-192
• /
• 2013

This study presents application effects of hybrid seismic isolation system to realize high seismic performance for low-rise lightweight buildings through a non-linear analysis and onsite experiments. The complex seismic isolation system applied in this study is a method of mixing sliding bearing and laminated rubber bearing in order to overcome limitation of laminated rubber bearing in increasing natural period of the whole seismic isolation system. As a result of the non-linear analysis, seismic isolation buildings designed with complex seismic isolation system are safe because its maximum response displacement is within allowable design displacement even for a strong earthquake which rarely occurs and its maximum response shear is less than design seismic force. As a result of the onsite experiment, the rigidity of seismic isolation stories corresponds to approximately 95.8% of the design equivalent stiffness value. This indicates that actual properties of the whole seismic isolation system correspond to design values.

• Journal of Cadastre & Land InformatiX
• /
• v.50 no.2
• /
• pp.69-79
• /
• 2020

TRecently, smart cities that solve various problems in cities based on IoT technology are in the spotlight. In particular, cases of BIM application for smooth management of construction and maintenance are increasing, and spatial information is converted into 3D data through convergence technology and used for safety diagnosis. The purpose of this study is to create and combine point clouds of a multi-story building by using a ground laser scanner and a handheld LiDAR SLAM among UAV and LiDAR equipment, supplementing the Occluded area and disadvantages of each technology, examine the effectiveness of indoor and outdoor reverse design by observing shape reproduction and accuracy. As a result of the review, it was confirmed that the coordinate accuracy of the data was improved by creating and combining the indoor and outdoor point clouds of the multi-story building using three technologies. In particular, by supplementing the shortcomings of each technology, the completeness of the shape reproduction of the building was improved, the Occluded area and boundary were clearly distinguished, and the effectiveness of reverse engineering was verified.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.23 no.5
• /
• pp.96-103
• /
• 2019

Middle-rise reinforced concrete residential buildings account for a large portion of the Korea, and structural performance analysis are needed for problems that could occur during the construction of such buildings. Thus, a middle-rise reinforced concrete residential building with 25 stories are selected as a sample model for structural performance analysis. The structural analyses are performed by dividing a sample model into the construction stage models of the 5th, 10th, 15th, 20th and 25th floors and the completion stage models with the design completed. For the comparisons of structural performances, Eigenvalue analysis results and lateral-load-resisting capabilities and structural design performances of structural members are analyzed. As a result of analyses, it was confirmed that both the construction and completion stage do not exceed KBC criteria limits at the lateral displacement and story drift ratio, and structural design performances of structural members confirm structural safety in all components except for some members of the wall. Therefore, it was concluded that if structural stability is obtained during the completion stage of a middle-rise reinforced concrete residential building, structural stability is secured under construction.

• Journal of the Korea Institute of Building Construction
• /
• v.20 no.3
• /
• pp.297-304
• /
• 2020

Design for Safety(DfS) at the design stage is introduced and executed in order to fundamentally reduce the occurrence of construction safety accidents in Korea. Therefore, in this study, the construction method selected by Design for Safety can reduce safety accidents, but the effects on construction duration and costs were examined to confirm the effectiveness of various aspects. The construction method of the structural frame for the exterior wall cladding of the building, which have the factors for the fall accident, was selected for construction safety and compared and analyzed in terms of construction duration and costs. As a result, it was found to be effective not only in terms of safety, but also in terms of construction duration and costs. Therefore, it is considered that the construction method selected by the Design for Safety at the design stage will have a positive effect on the entire construction project.

• Journal of the Society of Disaster Information
• /
• v.16 no.1
• /
• pp.44-59
• /
• 2020

This study analyzed a gas explosion accident. A gas smell from a underground coffee shop in the two-story building was reported to 119. A fire brigade was turned out, turned off the main valve of LPG gas cylinder on the roof, and checked the turning off of middle valve in the coffee shop. The fire brigade required a gas supplier and gas installer who arrived at the spot to take safety actions. Gas explosion occurred seven minutes after the fire brigade was withdrawn and two people died and 21 people were injured. A court decided that because the causes for gas explosion were not found, compensation responsibility could not be charged with the gas supplier, the gas installer, or Korea Gas Safety Corporation. In this reason, the court judged that only the fire brigade who was withdrawn without taking safety actions shall compensate victims or bereaved families. Therefore, fire brigades who turn out after a 119 report of a gas leak should take safety actions such as escaping people or preventing people's access and ventilating and be withdrawn when there is no possibility of fire or explosion.